Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Dys, this (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Brushless ESC; supported software Dshot300/Dshot600; mcu type Silabs EFM8BB21.

Key Highlights

  • Item Type: Brushless ESC
  • Supported Software: Dshot300/Dshot600
  • MCU Type: Silabs EFM8BB21

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushless ESC
Supported SoftwareDshot300/Dshot600
MCU TypeSilabs EFM8BB21
Continuous Discharge Current (A)20
ColorYellow
Length (mm)36
Width (mm)26
Weight (g)32
Shipping Weight0.007 kg
Shipping Dimensions10 × 6 × 1 cm

Overview

The DYS 20A Brushless ESC for FPV Drone (Original), made by Dys, is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushless ESC
  • Supported Software: Dshot300/Dshot600 (confirm your cable or board uses the same connector)
  • MCU Type: Silabs EFM8BB21 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Continuous Discharge Current (A): 20 (your supply must deliver at least this much current)
  • Color: Yellow
  • Length (mm): 36 (measure your mounting space before ordering)
  • Width (mm): 26 (measure your mounting space before ordering)
  • Weight (g): 32 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Take advantage of the latest DYS XSD20A ESC Solder Version BLHeli_S development with these DShot capable ESC’s. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilize a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.


Features:

  1. Utilizes high-performance EFM8BB21 50MHz MCU
  2. 12 FET Design
  3. High-current burst rating
  4. High-Resolution Throttle steps
  5. Supports: BLheli_S & Dshot600, Dshot300 - faster than Oneshot
  6. Dshot ESCs don't require an ESC calibration
  7. Firmware upgradable via signal wire (works with USB Linker for XM series)
  8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS 20A Brushless ESC for FPV Drone

Quick specs

Item Type
Brushless ESC
Supported Software
Dshot300/Dshot600
MCU Type
Silabs EFM8BB21
Continuous Discharge Current (A)
20
Color
Yellow
Length (mm)
36
See all specifications