Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Dys, this (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Brushless ESC; operating voltage (vdc) DC 6-16.8V(2-5S Lixx); continuous discharge current (a) 20. Check that your power source supplies DC 6-16.8V(2-5S Lixx) before connecting it.

Key Highlights

  • Item Type: Brushless ESC
  • Operating Voltage (VDC): DC 6-16.8V(2-5S Lixx)
  • Continuous Discharge Current (A): 20

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeBrushless ESC
Operating Voltage (VDC)DC 6-16.8V(2-5S Lixx)
Continuous Discharge Current (A)20
Length (mm)46
Width (mm)26
Weight (g)22
ColorBlue
Shipping Weight0.027 kg
Shipping Dimensions9 × 6 × 1 cm

Overview

The DYS 20A Multi-copter Brushless Speed Controller, made by Dys, is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushless ESC
  • Operating Voltage (VDC): DC 6-16.8V(2-5S Lixx) (match this to your power supply; too high a voltage can damage the part)
  • Continuous Discharge Current (A): 20 (your supply must deliver at least this much current)
  • Length (mm): 46 (measure your mounting space before ordering)
  • Width (mm): 26 (measure your mounting space before ordering)
  • Weight (g): 22 (important for drones, RC models and anything you carry)
  • Color: Blue
  • Shipping Weight: 0.027 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DYS 20A Multi-Copter Brushless Speed Controller . The ESC's power input uses extremely low output resistance greatly enhances power stability and has a protective effect on the battery. Separately voltage regulator IC for the microprocessor. providing good anti-jamming capability. Using Simon K’s dedicated multi-copter program, and the master chip with high stability crystal oscillator, making the motor control more precise. Note: Actual products may vary from the product images.

Features:

  1. Drive tube and high-power Mos, and Mos tube plus a separate heat sink, Extreme low output resistance of the PCB(printed circuit board), super current endurance.
  2. The power input uses extremely low output resistance greatly enhances the power stability and has a protective effect on the battery.
  3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately, to avoid personal injury.
  4. Separately voltage regulator IC for the microprocessor. providing good anti-jamming capability.
  5. Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
  6. Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control more precise.

Package Includes:

1 x DYS 20A Multi-copter Brushless Speed Controller

Quick specs

Item Type
Brushless ESC
Operating Voltage (VDC)
DC 6-16.8V(2-5S Lixx)
Continuous Discharge Current (A)
20
Length (mm)
46
Width (mm)
26
Weight (g)
22
See all specifications