
1 / 3 · Click to enlarge
AI Summary
The DYS D2836-6 is a 1500KV outrunner brushless motor for quadcopters and multirotors, weighing about 70 g with a 4 mm shaft. It runs on 2S to 4S LiPo and includes pre-soldered 3 mm banana connectors for direct 40A ESC hookup.
Key Highlights
- 1500KV outrunner winding for quadcopter and multirotor builds
- Runs on 2S to 4S LiPo batteries with a 40A ESC
- 70 g motor weight with a 4 mm shaft diameter
- 3 mm banana male connectors pre-soldered for plug-and-play ESC wiring
- Steel construction aimed at withstanding competitive flight conditions
- Includes prop adapter, X-type motor mount, screws and user manual
Ideal For
- Builders of medium-size quadcopters using 10-inch propellers
- Long-range and endurance multirotor projects
- Hexacopter frame builds needing lightweight motors
- RC hobbyists who prefer pre-soldered ESC connectors
- Makers assembling multirotors with 2S to 4S LiPo packs
Buying Tip
Confirm your ESC accepts 3 mm banana plugs and that your frame fits the included X-type mount before ordering, since those parts determine how quickly you can complete the build.
Elecvora expert review
Our verdict
The DYS D2836-6 is a sensible mid-range motor for builders who want predictable multirotor performance without extra wiring work. Its pre-soldered connectors and included mount make assembly straightforward for medium frames.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-soldered 3 mm banana connectors simplify ESC hookup
- Works across 2S to 4S LiPo packs for flexible builds
- Includes prop adapter, X-type mount and screws
- Moderate 70 g weight suits medium quadcopter frames
Cons
- Requires a separate 40A ESC and battery, which are not included
- Propeller choice and tuning affect results, so setup needs care
- Only 4 mm shaft and 3 mm connectors are specified, limiting some aftermarket parts
Best for
Medium quadcopter and multirotor builders wanting simple, efficient motor wiring
Not ideal for
Pilots needing a complete plug-and-fly power system or very small frames
Specifications
| Motor Type | Brushless Motor |
|---|---|
| Compatible LiPO Batteries | 2S to 4S |
| Weight (g) | 70 |
| Shaft Diameter | 4 mm |
| Shipping Weight | 0.91 kg |
| Shipping Dimensions | 11 × 6 × 5 cm |
What's in the box
- 1 x DYS D2836 1500KV brushless motor
- 1 x prop adapter
- 1 x X-type motor mount and set of screws
- 1 x user manual
Frequently Asked Questions
What battery should I use with this motor?
Do I need to solder the motor wires?
What ESC works with this motor?
What is included in the package?
What size shaft does the motor have?
Can I use this motor on a hexacopter?
Overview
The DYS D2836-6 is a 1500KV outrunner brushless motor designed for quadcopters and multirotors. It sits in the long-range and endurance motor range, where smooth throttle response and dependable efficiency matter more than short bursts of extreme power. At around 70 g per motor with a 4 mm shaft, it is sized for medium quadcopter frames running 10-inch propellers.
Each motor ships with 3 mm banana male connectors already soldered in place, so it can connect directly to a 40A ESC without extra soldering work at the bench.
Key Features
- 1500KV outrunner brushless motor for multirotor use
- Compatible with 2S to 4S LiPo batteries
- 4 mm shaft diameter and approximately 70 g motor weight
- Pre-soldered 3 mm banana male connectors for 40A ESCs
- Steel construction intended to handle competitive conditions
- Compact, lightweight design that suits a range of quadcopter and hexacopter frames
Specifications Explained
1500KV rating
The KV figure describes how fast the motor turns per volt applied. A 1500KV motor is a moderate choice for multirotors, pairing well with 10-inch propellers where you want controlled response rather than very high RPM.
2S to 4S LiPo compatibility
You can run this motor on packs from 2S up to 4S. Higher cell counts raise voltage and potential thrust, so match your propeller and ESC choice to the pack you plan to use.
70 g weight and 4 mm shaft
At roughly 70 g, the motor adds modest weight to a medium frame. The 4 mm shaft is a common size for prop adapters and mounts in this class.
Connectors and ESC
The included 3 mm banana male connectors are already attached, allowing a direct connection to a 40A ESC. Check that your ESC accepts 3 mm banana plugs before installation.
Compatibility and Requirements
This motor is intended for quadcopters and multirotors. It requires a 2S to 4S LiPo battery, a 40A ESC, and a propeller suited to your frame. Because the bullet connectors are pre-soldered, no soldering is needed for the motor-to-ESC connection, though you will still need to mount the motor and secure the propeller.
Typical Uses
Builders use this motor for medium-size quadcopters with four propellers, endurance-oriented multirotors, and hexacopter frames that need a lightweight motor. It is also a practical option for general RC multirotor projects where straightforward wiring and steady performance are priorities.
What's in the Box
- 1 x DYS D2836 1500KV brushless motor
- 1 x prop adapter
- 1 x X-type motor mount and set of screws
- 1 x user manual
Quick specs
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 2S to 4S
- Weight (g)
- 70
- Shaft Diameter
- 4 mm
- Shipping Weight
- 0.91 kg
- Shipping Dimensions
- 11 × 6 × 5 cm


















