Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 750KV outrunner brushless motor for quadcopters and multirotors, rated to 206W with a 4mm shaft. It runs 9 to 12 inch props on a 40A ESC and weighs about 70g.

Key Highlights

  • 750KV winding suited to 9 to 12 inch propellers
  • 206W maximum power output for medium-size multirotors
  • 4mm shaft diameter for secure prop adapter mounting
  • 70g motor weight keeps multirotor builds light
  • Pre-fitted motor connector for direct 40A ESC connection
  • Compact 28mm motor width fits a range of frames

Ideal For

  • Builders of medium-size quadcopters using 9 to 12 inch props
  • Multirotor hobbyists assembling a 40A ESC setup
  • RC airplane and UAV project builders needing a 750KV outrunner
  • Makers who prefer pre-fitted motor connectors over soldering at the ESC end

Buying Tip

Confirm your frame accepts a 28mm-wide motor and that your ESCs are rated at 40A before ordering, since the motor is specified around that combination.

Elecvora expert review

Our verdict

A sensible mid-range outrunner for multirotors that need a 750KV motor turning larger props. It is light, straightforward to wire thanks to the pre-fitted connector, and reasonably priced for the specification.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 750KV winding paired with a wide 9 to 12 inch prop range
  • 206W power ceiling suits medium-size multirotors
  • Around 70g keeps weight in check
  • Motor connector already fitted simplifies ESC wiring

Cons

  • Specified around a 40A ESC, so the ESC is a separate purchase
  • No battery or propeller included in the box

Best for

Medium-size quadcopters and multirotor builds using 9 to 12 inch props

Not ideal for

Very small frames or high-RPM lightweight builds that need a higher-KV motor

Specifications

Motor KV (RPM/V)750 KV
Motor TypeBrushless Motor
Shaft Diameter4 mm
Max. Power (W)206
Compatible Prop (inch)09-12inch
Required ESC (A)40
Width (mm)28
Weight (g)70
Shipping Weight0.075 kg
Shipping Dimensions7 × 4 × 2 cm

What's in the box

  • 1 x DYS D2836 750KV brushless motor
  • 1 x prop adapter
  • 1 x motor holder (X-type) with set of screws
  • 1 x user manual

Frequently Asked Questions

What does 750KV mean on this motor?
It means the motor spins at 750 RPM for every volt applied. This lower-KV rating is intended for use with larger 9 to 12 inch propellers rather than small high-speed setups.
Which ESC should I use with it?
The motor is specified for a 40A ESC. Its connector is already fitted, so you can connect it directly to a compatible ESC.
What propeller sizes are supported?
Propellers from 9 to 12 inches are specified for this motor. Stay within that range to match the 750KV winding and 206W rating.
What is included with the motor?
You receive the motor, one prop adapter, an X-type motor holder with screws, and a user manual.
What is the shaft diameter?
The shaft is 4mm, which is the size the included prop adapter fits onto.
Can I use it on an RC airplane?
Yes, the motor is intended for quadcopters, multirotors, RC airplanes and UAV applications, provided your prop and ESC choices match the stated specifications.

Overview

The DYS D2836 750KV is an outrunner brushless motor intended for quadcopters, multirotors, RC airplanes and UAV builds. It uses a 750KV winding, meaning it turns at 750 RPM per volt applied, which places it in the lower-KV range where larger propellers and steadier, more efficient thrust are the priority. With a 206W maximum power rating and a 4mm shaft, it suits medium-size airframes that need reliable lift without adding unnecessary weight.

Key Features

  • 750KV outrunner design for 9 to 12 inch propellers
  • 206W maximum power handling
  • 4mm shaft diameter for the included prop adapter
  • Approximately 70g motor weight
  • 28mm motor width for compact frame fitment
  • Motor connector pre-fitted for direct 40A ESC connection
  • Steel-based construction aimed at withstanding regular flight conditions

Specifications Explained

KV rating

At 750KV, the motor is intended for builds where propeller size matters more than raw RPM. Lower-KV motors like this one are typically paired with larger props to generate thrust efficiently, which is why the 9 to 12 inch range is specified.

Power and ESC

The 206W maximum power figure tells you the ceiling this motor is rated for. A 40A ESC is the specified companion, and because the motor already carries its connector, wiring to a compatible ESC is simplified.

Shaft and size

A 4mm shaft gives a solid mounting point for the supplied prop adapter. At 28mm wide and around 70g, the motor is compact enough for a variety of multirotor frames without weighing the build down.

Compatibility and Requirements

This motor is specified for 9 to 12 inch propellers and a 40A ESC. It is designed for quadcopters, multirotors, RC airplanes and UAV applications. Check that your frame, propeller choice and ESC rating match these figures before installation.

Typical Uses

Suitable for medium-size quadcopters, multirotor builds, RC airplane projects and UAV platforms where a 750KV outrunner with a 4mm shaft is the right fit. The smooth throttle response makes it a practical choice for pilots who want predictable control through the throttle range.

What's in the Box

  • 1 x DYS D2836 750KV brushless motor
  • 1 x prop adapter
  • 1 x motor holder (X-type) with a set of screws
  • 1 x user manual

Quick specs

Motor KV (RPM/V)
750 KV
Motor Type
Brushless Motor
Shaft Diameter
4 mm
Max. Power (W)
206
Compatible Prop (inch)
09-12inch
Required ESC (A)
40
See all specifications