
1 / 5 · Click to enlarge
AI Summary
A 1450KV brushless outrunner rated at 655W with up to 1380g thrust per motor, intended for 8-9 inch propeller multirotors. Its 5mm shaft and 7.4-15V range make it simple to pair with common 30-40A ESCs.
Key Highlights
- 1450KV wind tuned for endurance-style multirotor builds
- 655W maximum power with up to 1380g thrust per motor
- 5mm shaft suits 9x6 and 8x4 propellers
- 12-pole outrunner design for smooth throttle response
- Rated for 7.4 to 15V input with 30-40A or 50A ESCs
- Compact 0.135kg shipping weight keeps builds light
Ideal For
- Long-range quadcopter builders working with 8-9 inch props
- Pilots assembling medium-size endurance multirotors
- Camera platform and UAV projects needing steady thrust
- RC airplane hobbyists using compact outrunner motors
Buying Tip
Check your propeller size and battery voltage against the 7.4-15 V range before ordering, and confirm your ESC is rated 30-40 A or 50 A.
Elecvora expert review
Our verdict
The D3536-5 1450KV is a straightforward outrunner with sensible numbers for endurance builds. Its 655 W rating and 1380 g thrust ceiling give enough margin for medium frames without pushing into heavy-lift territory.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 655 W power rating and 1380 g thrust figure for build planning
- Flexible 7.4-15 V input range
- 5 mm shaft matches the listed 8x4 and 9x6 props
- 12-pole design supports smooth throttle response
Cons
- Higher KV wind is less suited to very large propellers
- Requires correct ESC timing setup for a 12-pole motor
- Mounting hardware depends on frame compatibility
Best for
Medium-size endurance and long-range multirotor builds
Not ideal for
Heavy-lift or aggressive acro quads needing extreme peak thrust
Specifications
| Shaft Diameter | 5 mm |
|---|---|
| Max. Power (W) | 655 |
| No of poles | 12 |
| Maximum Thrust (gm) | 1380 |
| Compatible Prop (inch) | 9x6/8x4 |
| Required ESC (A) | 30-40, 50A |
| Voltage Rating (V) | 7.4 ~ 15v |
| Shipping Weight | 0.135 kg |
| Shipping Dimensions | 8 × 5 × 5 cm |
What's in the box
- 1 x Dys D3536-5 1450KV outrunner brushless motor
- 1 x propeller adapter
- 1 x X-type motor holder with screws
- 1 x user manual
Frequently Asked Questions
What propellers work with this motor?
Which ESC should I use?
What battery voltage is suitable?
How much thrust does one motor produce?
What comes in the box?
How should I set motor timing?
Overview
The Dys D3536-5 is a 1450KV brushless outrunner motor aimed at medium-size multirotors. It sits in the long-range and endurance segment, where consistent output across a full flight matters more than a brief peak. The motor pairs a 5 mm shaft with a 12-pole stator and is rated at 655 W maximum power, giving builders a clear starting point when matching props, ESCs and batteries.
Key Features
- 1450KV rating for a balance of RPM and torque on 8-9 inch propeller setups.
- 655 W maximum power to support steady cruising and controlled climbs.
- Up to 1380 g thrust per motor, useful when calculating total lift for a build.
- 12-pole outrunner construction for smooth, predictable throttle response.
- 5 mm shaft that fits the listed 9x6 and 8x4 propeller options.
- Compact footprint with a shipping weight of just 0.135 kg.
Specifications Explained
The 1450KV figure describes how fast the motor turns per volt applied, so it directly shapes the propeller size and battery voltage you choose. With a 7.4 to 15 V rating, the motor can run on a range of packs within that window, and the 9x6 or 8x4 prop recommendation keeps the load within sensible limits.
Maximum thrust of 1380 g per motor is the number to use when sizing a frame: multiply by the number of motors to estimate total lift, then leave margin for the airframe, battery and payload. The 655 W power ceiling tells you how much the motor can absorb before heat becomes a concern, and the 30-40 A ESC recommendation, with 50 A as an option, gives you headroom for the propeller and voltage you settle on.
Compatibility and Requirements
The D3536-5 is designed for 9x6 and 8x4 propellers and expects an ESC rated at 30-40 A, with 50 A acceptable where extra margin is preferred. Supply voltage must stay within 7.4 to 15 V. The 5 mm shaft sets the propeller adapter and mounting hardware you will need, and the 12-pole layout is relevant when setting motor timing in your ESC configuration.
Typical Uses
This motor suits medium-size quadcopters and hexacopters built for longer flights, camera-carrying platforms, general UAV projects and RC aircraft that call for a compact outrunner. Its thrust and power figures make it a reasonable choice for endurance cruising rather than aggressive acro flying.
What's in the Box
- 1 x Dys D3536-5 1450KV outrunner brushless motor
- 1 x propeller adapter
- 1 x motor holder (X-type) with a set of screws
- 1 x user manual
Quick specs
- Shaft Diameter
- 5 mm
- Max. Power (W)
- 655
- No of poles
- 12
- Maximum Thrust (gm)
- 1380
- Compatible Prop (inch)
- 9x6/8x4
- Required ESC (A)
- 30-40, 50A




















