
1 / 8 · Click to enlarge
AI Summary
The DYS SUNFUN D2207 2600Kv BLDC Motor is a lightweight brushless motor for FPV racing drones, supporting 4S-5S LiPo. Its 16x16mm mounting pattern and 36.4g weight make it a solid choice for 5-inch quad builds.
Key Highlights
- 2600Kv rating for 4S-5S LiPo batteries
- Standard 16x16mm mounting pattern
- Lightweight at 36.4g per motor
- 20AWG 15cm motor wires pre-soldered
- Includes CW M3 prop nut
- Designed for FPV racing drones
Ideal For
- FPV racing pilots building 5-inch quads
- Freestyle drone enthusiasts on a budget
- Beginners learning to fly FPV
- Pilots upgrading to 4S-5S power systems
- DIY drone builders needing reliable motors
Buying Tip
Check that your ESC and frame support 4S-5S LiPo and 16x16mm mounting before purchasing.
Elecvora expert review
Our verdict
The DYS SUNFUN D2207 2600Kv is a solid, affordable motor for FPV racing and freestyle. It offers good performance for its price, though it may not match premium motors in efficiency or durability.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight at 36.4g
- Supports 4S and 5S LiPo
- Standard 16x16mm mounting
- Pre-soldered 20AWG wires
- Includes prop nut
Cons
- Requires soldering to ESC
- No propeller included
- Limited to 5S maximum
Best for
Budget-conscious FPV pilots building or upgrading a 5-inch racing quad.
Not ideal for
Pilots seeking premium efficiency or those using 6S batteries.
Specifications
| Compatible LiPO Batteries | 4S to 5S |
|---|---|
| Supported | 4S and 5S LiPo |
| Base Mounting Pattern | 16x16mm |
| Motor Wire Length | 20awg 15cm |
| Weight (g) | 36.4g |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 6 × 6 × 4 cm |
What's in the box
- 1 x DYS SUNFUN D2207 2600Kv BLDC Motor
- 1 x CW M3 Prop Nut
Frequently Asked Questions
What batteries does this motor support?
What is the mounting hole pattern?
Does it come with a propeller?
What gauge and length are the motor wires?
Is a prop nut included?
What is the weight of the motor?
Overview
The DYS SUNFUN D2207 2600Kv BLDC Motor is a brushless motor built for FPV racing drones. With a 2600Kv rating, it is optimised for 4S to 5S LiPo batteries, delivering strong thrust for 5-inch propeller setups. The motor weighs just 36.4g, helping keep your quad agile and responsive. Its 16x16mm mounting pattern fits a wide range of racing frames, and the pre-soldered 20AWG 15cm wires simplify installation. Whether you are building your first racing quad or refreshing an existing one, this motor offers a practical balance of performance and value.
Key Features
- 2600Kv brushless motor – provides a good balance of torque and top speed for 4S-5S LiPo setups.
- 16x16mm mounting pattern – compatible with many standard 5-inch frames.
- Lightweight construction – at 36.4g, it minimises weight without sacrificing durability.
- 20AWG 15cm motor wires – pre-soldered for easy connection to your ESC.
- Includes CW M3 prop nut – ready for prop installation.
Specifications Explained
Kv rating: The 2600Kv value indicates the motor's RPM per volt. With a 4S LiPo (14.8V nominal), it will spin at approximately 38,480 RPM unloaded; with 5S (18.5V), around 48,100 RPM. This makes it suitable for aggressive racing and freestyle flying.
Battery compatibility: The motor supports 4S and 5S LiPo batteries. Always check your ESC and propeller ratings to ensure they can handle the current draw.
Mounting pattern: The 16x16mm hole spacing is a common standard for 5-inch drone frames, so it should bolt directly onto most racing frames without modification.
Weight: At 36.4g, this motor is competitive for its class, helping to keep overall quad weight low for better flight times and agility.
Compatibility and Requirements
This motor requires a compatible ESC (electronic speed controller) and a 4S or 5S LiPo battery. It is designed for 5-inch propellers, but always verify propeller compatibility with the motor's Kv rating and your battery voltage. The 20AWG wires are pre-soldered and ready to connect to your ESC. You will need a suitable frame with 16x16mm mounting holes and a propeller that matches the motor's shaft (not specified).
Typical Uses
This motor is ideal for FPV racing quads, freestyle drones, and beginner builds where affordability and performance are key. It suits pilots who want a reliable motor for practice or competitive flying on 4S or 5S setups.
What's in the Box
- 1 x DYS SUNFUN D2207 2600Kv BLDC Motor
- 1 x CW M3 Prop Nut
Quick specs
- Compatible LiPO Batteries
- 4S to 5S
- Supported
- 4S and 5S LiPo
- Base Mounting Pattern
- 16x16mm
- Motor Wire Length
- 20awg 15cm
- Weight (g)
- 36.4g
- Shipping Weight
- 0.06 kg



















