Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1500KV brushless motor for 6-7 inch FPV freestyle and long range quads, rated for 3S-5S LiPo. It pairs a 12N14P stator with a 4mm shaft and 48.6g weight for smooth, efficient thrust.

Key Highlights

  • 1500KV winding tuned for 3S to 5S LiPo long range setups
  • 12N14P stator configuration for smooth, efficient rotation
  • 4mm bearing shaft for durability on 6-7 inch prop loads
  • 1300W max power and 63A peak current for aggressive throttle
  • Lightweight 48.6g body suits endurance-focused 7 inch builds
  • Pre-fitted 200mm 18 AWG wires simplify installation

Ideal For

  • FPV pilots building 7 inch long range quads
  • Freestyle flyers using 6-7 inch propellers
  • Mark4 FPV Freestyle frame owners
  • Pilots running 3S to 5S LiPo setups
  • Builders wanting a lightweight 48.6g motor

Buying Tip

Check your ESC continuous current rating against the 63A peak figure and confirm your frame's motor mounting holes before ordering.

Elecvora expert review

Our verdict

A sensible mid-KV outrunner for 7 inch long range and freestyle builds, offering useful torque on 3S-5S without excessive weight. The published power figures suggest it can take hard throttle, provided the ESC is sized correctly.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 1500KV suits 6-7 inch props and endurance flying
  • 12N14P layout gives smooth torque delivery
  • 1300W peak power and 63A peak current headroom
  • Light 48.6g motor weight
  • Pre-fitted 200mm 18 AWG leads

Cons

  • ESC, battery and props are not included
  • Only rated up to 5S, so no 6S use
  • Motor mounting hardware is not listed

Best for

7 inch long range and freestyle FPV builds on 3S-5S

Not ideal for

6S high-RPM racing builds

Specifications

Motor KV (RPM/V)1500 KV
Motor TypeBrushless Motor
Model No. / NameX2807
Bearing Shaft4mm
Peak Current (A)63
Max. Power (W)1300
Configuration12N 14P
Compatible Prop (inch)6"-7"
Weight (g)48.6
Internal Resistance(mOhm)55
Shipping Weight0.07 kg
Shipping Dimensions6 × 5 × 4 cm

What's in the box

  • 1 x DYS X2807 1500KV 3S-5S Brushless Motor for Mark4 FPV Freestyle 7inch Long Range

Frequently Asked Questions

What voltage batteries can this motor run?
It is rated for 3S to 5S LiPo packs. Do not exceed 5S, as the motor is not specified beyond that range.
Which propeller sizes fit this motor?
The motor is listed as compatible with 6 inch to 7 inch propellers, matching its intended 7 inch long range and freestyle use.
Is this motor suitable for a Mark4 7 inch frame?
Yes, it is designed around the Mark4 FPV Freestyle 7 inch Long Range platform. Check your frame's mounting pattern before fitting.
What comes in the package?
One DYS X2807 1500KV brushless motor is included. ESCs, propellers, batteries and mounting hardware are not part of the package.
What is the shaft size?
The motor uses a 4mm bearing shaft, so choose propeller adapters or hubs that match this diameter.
How should I maintain the motor?
Keep the bell and bearings clean, check for play or grit after crashes, and inspect the 200mm leads for wear. Replace damaged bearings rather than running them dry.

Overview

The DYS X2807 1500KV is a brushless outrunner motor designed for 6 to 7 inch FPV freestyle and long range quadcopters, including Mark4-style 7 inch frames. Its 1500KV rating sits in the endurance-oriented range, pairing moderate RPM per volt with the torque needed to spin larger props efficiently across 3S to 5S LiPo packs.

Key Features

  • 1500KV brushless motor with a 12N14P stator configuration
  • Rated for 3S to 5S LiPo input
  • 4mm bearing shaft and 55 mOhm internal resistance
  • 1300W maximum power with 63A peak current
  • 48.6g motor weight with 200mm 18 AWG leads
  • Compatible with 6 inch and 7 inch propellers

Specifications Explained

1500KV describes how fast the motor spins per volt applied. At this value the motor favours torque and efficiency over raw top-end RPM, which suits larger 6 to 7 inch props and longer flights rather than short, high-speed bursts.

12N14P refers to 12 stator slots and 14 permanent magnets. This common outrunner layout contributes to smooth, consistent torque delivery through the throttle range.

Peak current of 63A and 1300W maximum power indicate the load the motor can handle momentarily under hard throttle. Your ESC and battery should be chosen with headroom above your expected continuous draw.

55 mOhm internal resistance is a measure of electrical efficiency inside the windings; lower values generally mean less energy lost as heat. The 4mm bearing shaft provides a sturdy mounting point for the propeller hub, and the 48.6g weight keeps the arm mass reasonable for a 7 inch build.

Compatibility and Requirements

This motor is intended for 3S to 5S LiPo configurations and 6 inch to 7 inch propellers. It is designed around the Mark4 FPV Freestyle 7 inch Long Range platform. The supplied leads are 200mm long and 18 AWG. ESCs, batteries, propellers and the frame itself are not included, so confirm your ESC current rating and motor mounting pattern match your build before installation.

Typical Uses

Suited to long range cruising, cinematic 7 inch platforms and freestyle flying where predictable torque matters more than extreme RPM. The 1500KV winding also works well for pilots flying moderate voltage packs who want longer flight times from larger props.

What's in the Box

  • 1 x DYS X2807 1500KV 3S-5S Brushless Motor

Quick specs

Motor KV (RPM/V)
1500 KV
Motor Type
Brushless Motor
Model No. / Name
X2807
Bearing Shaft
4mm
Peak Current (A)
63
Max. Power (W)
1300
See all specifications