
1 / 6 · Click to enlarge
AI Summary
These stainless steel compression springs (OD 6mm, ID 5mm, length 40mm) are designed for 3D printer heatbed leveling and cushioning. The 4-piece pack provides reliable, rust-free tension for consistent bed adjustment.
Key Highlights
- Stainless steel construction resists rust and corrosion
- Outer diameter 6mm, inner diameter 5mm for standard bed screws
- 40mm free length for ample compression range
- Pack of 4 springs for a complete bed setup
- Provides stable tension for manual bed leveling
- Compact and lightweight spare part
Ideal For
- 3D printer owners performing bed leveling maintenance
- Makers replacing worn or missing bed springs
- DIY enthusiasts building custom 3D printers
- Schools and workshops maintaining multiple printers
Buying Tip
Check that your bed screws are no wider than 5mm and that the spring's 6mm outer diameter fits your mounting holes before ordering.
Elecvora expert review
Our verdict
These springs offer a straightforward solution for restoring bed leveling on compatible 3D printers. The stainless steel construction and standard dimensions make them a reliable choice for maintenance.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Rust-resistant stainless steel
- Standard dimensions fit many printers
- Four-piece pack for complete replacement
- Consistent compression for stable leveling
Cons
- Not universal; check screw and hole sizes
- No installation instructions included
Best for
3D printer users needing replacement bed springs
Not ideal for
Printers with non-standard bed mounting or larger screws
Specifications
| Item Type | Spring |
|---|---|
| Material | Stainless Steel |
| Outer Diameter (mm) | 6 |
| Inner Diameter (mm) | 5 |
| Length (mm) | 40 |
| Size (mm) | 40x6 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
What's in the box
- 4 x EasyMech 0.5mm Stainless Steel Heatbed Spacer Compression Spring (OD 6mm x ID 5mm x L 40mm)
Frequently Asked Questions
What are these springs used for?
Will these fit my 3D printer?
Are the springs rust-proof?
How many springs are included?
Do I need any other hardware?
How do I maintain these springs?
Overview
The EasyMech 0.5mm stainless steel heatbed spacer compression spring is a small but important component for any 3D printer that uses spring-loaded bed leveling. These springs sit between the heated bed and the frame, compressing as you turn the adjustment screws to set the nozzle height. This pack contains four springs, enough to replace a full set on a typical four-point bed mounting system.
Key Features
- Stainless steel build: Resists rust and corrosion, even in humid environments.
- Precise dimensions: 6mm outer diameter, 5mm inner diameter and 40mm length suit common M3 or M4 bed screws.
- Consistent tension: Provides even compression for stable bed leveling and reduced vibration transfer.
- Four-piece set: A complete replacement set for a standard bed.
Specifications Explained
The 6mm outer diameter and 5mm inner diameter mean the spring fits over a screw with a diameter up to about 5mm, while the 6mm outside width keeps it stable in the bed mounting hole. The 40mm free length gives a good range of compression, allowing you to adjust the bed height without the spring becoming fully compressed or loose. The 0.5mm wire thickness offers a balance between firm support and easy adjustment.
Compatibility and Requirements
These springs are intended for 3D printers that use spring-loaded bed leveling. They are not a universal fit for every printer; check that your bed screws are no larger than 5mm in diameter and that the mounting space can accommodate a 6mm outer diameter spring. No other hardware is included.
Typical Uses
Use these springs to replace worn or lost springs on your 3D printer's heatbed. They are also useful for custom builds or upgrades where a reliable compression spring is needed for bed suspension. The stainless steel material makes them suitable for long-term use.
What's in the Box
Four EasyMech 0.5mm stainless steel heatbed spacer compression springs.
Quick specs
- Item Type
- Spring
- Material
- Stainless Steel
- Outer Diameter (mm)
- 6
- Inner Diameter (mm)
- 5
- Length (mm)
- 40
- Size (mm)
- 40x6


















