Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

EasyMech heatbed spacer compression springs are stainless steel components for 3D printer bed leveling and cushioning. The set of four 45 mm springs with 7.4 mm OD and 5.4 mm ID helps maintain consistent bed support.

Key Highlights

  • Stainless steel construction resists rust
  • Set of four springs for full bed replacement
  • 45 mm length with 7.4 mm outer diameter
  • 5.4 mm inner diameter fits common bed screws
  • 1 mm wire thickness for firm compression
  • Compact and lightweight for easy storage

Ideal For

  • 3D printer owners performing heatbed maintenance
  • Makers building custom FDM printers
  • Technicians replacing worn bed springs
  • Hobbyists upgrading bed leveling hardware
  • Users needing rust-resistant spring components

Buying Tip

Measure your existing bed screw diameter and available spring height before ordering to ensure the 5.4 mm ID and 45 mm length fit your printer.

Elecvora expert review

Our verdict

The EasyMech heatbed springs offer a straightforward, rust-resistant solution for bed leveling. Their precise dimensions and four-piece set make them a practical choice for standard printer maintenance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Stainless steel resists corrosion
  • Four springs provide full bed coverage
  • Clear dimensions for easy compatibility check
  • Lightweight and compact

Cons

  • No mounting hardware included
  • Limited to printers with matching screw size
  • Compression force may not suit all bed weights

Best for

Standard FDM 3D printers with M3 or M4 bed screws

Not ideal for

Printers requiring specialized spring rates or non-standard sizes

Specifications

Item TypeSpring
MaterialStainless Steel
Outer Diameter (mm)7.4
Inner Diameter (mm)5.4
Length (mm)45
Size (mm)45x7.4
Shipping Weight0.005 kg
Shipping Dimensions5 × 2 × 1 cm

What's in the box

  • 4 x EasyMech 1 mm SS Heatbed Spacer Compression Spring

Frequently Asked Questions

What are these springs used for?
They are used for 3D printer heatbed leveling and cushioning, helping to maintain consistent bed pressure and reduce vibration.
Will these fit my 3D printer?
They fit printers where the bed screw diameter is less than 5.4 mm and there is space for a 7.4 mm outer diameter spring with 45 mm free length. Check your printer's specifications.
Are the springs rust-resistant?
Yes, they are made of stainless steel, which provides rust resistance for long-term use.
How many springs are included?
The package contains four springs, enough for all four corners of a typical heatbed.
Do I need any additional hardware?
No additional hardware is included. You will reuse the existing screws and nuts from your printer.
How do I maintain these springs?
Keep them clean and dry. Occasionally check for compression set or wear and replace if performance degrades.

Overview

The EasyMech 1 mm SS Heatbed Spacer Compression Spring set is a four-piece kit of stainless steel springs intended for 3D printer heatbed leveling and cushioning. Each spring measures 45 mm in length, 7.4 mm in outer diameter, and 5.4 mm in inner diameter, with a 1 mm wire thickness. The stainless steel material provides resistance to rust, making these springs suitable for long-term use in a printer environment. This set is ideal for makers, technicians, and hobbyists who need to replace worn springs or build a new printer, as the four pieces allow simultaneous replacement of all corners for consistent bed support.

Key Features

  • Stainless steel material: Offers rust-free performance and durability.
  • Four-piece set: Provides enough springs for a complete heatbed corner setup.
  • Precise dimensions: 45 mm length, 7.4 mm OD, 5.4 mm ID, and 1 mm wire diameter for a firm, stable fit.
  • Compression design: Allows adjustable tension for bed leveling and cushioning.
  • Lightweight and compact: Easy to handle, store, and install.

Specifications Explained

The 45 mm length gives the spring a tall profile, which can accommodate a range of bed heights and adjustment needs. The 7.4 mm outer diameter ensures the spring fits within common mounting holes or brackets without excessive play. The 5.4 mm inner diameter is sized to fit over typical M3 or M4 bed screws, allowing the spring to sit securely around the screw. The 1 mm wire thickness provides a balance between flexibility and support, enabling the spring to compress under load while maintaining enough force to hold the bed steady. These dimensions are critical for ensuring compatibility with your printer's bed mounting hardware.

Compatibility and Requirements

These springs are designed for 3D printers that use compression springs for heatbed leveling. They are compatible with setups where the bed screw diameter is less than 5.4 mm and the mounting space can accommodate a 7.4 mm outer diameter spring. The 45 mm free length should be checked against your printer's available space, as compression will reduce the installed height. No additional hardware is included; you will need the existing screws and nuts from your printer. Always verify the dimensions against your printer's specifications before installation.

Typical Uses

These springs are commonly used for heatbed leveling and cushioning on FDM 3D printers. They help maintain consistent bed pressure and reduce vibration, contributing to better print adhesion and quality. They are also suitable for DIY printer builds, upgrades, or maintenance replacements. The stainless steel construction makes them appropriate for printers operating in humid environments where rust could be a concern.

What's in the Box

The package includes four EasyMech 1 mm SS Heatbed Spacer Compression Springs. No other accessories or mounting hardware are provided.

Quick specs

Item Type
Spring
Material
Stainless Steel
Outer Diameter (mm)
7.4
Inner Diameter (mm)
5.4
Length (mm)
45
Size (mm)
45x7.4
See all specifications