
1 / 6 · Click to enlarge
AI Summary
A four-piece set of stainless steel compression springs for 3D printer heatbed mounting, each 7.4 mm OD, 5.4 mm ID and 50 mm long. They cushion the bed plate and support manual levelling adjustments.
Key Highlights
- Four stainless steel compression springs per pack
- 7.4 mm outer diameter and 5.4 mm inner diameter
- 50 mm overall length for taller bed standoffs
- 1 mm wire gauge balances support and spring travel
- Rust-resistant material suits humid workshop conditions
- Suited to heatbed levelling and cushioning setups
Ideal For
- 3D printer owners replacing worn or corroded bed springs
- Makers building a custom spring-loaded heatbed mount
- Hobbyists maintaining a printer who want spare springs on hand
- Users upgrading bed levelling hardware on a compatible mount
Buying Tip
Measure your existing spring seat, centre screw and available clearance before ordering, since the 7.4 mm outer diameter, 5.4 mm inner diameter and 50 mm free length all need to suit your bed mount.
Elecvora expert review
Our verdict
These EasyMech springs are a straightforward consumable for anyone who needs stainless steel bed springs in a specific 7.4 mm OD, 5.4 mm ID and 50 mm size. The four-piece pack suits a typical four-point bed mount, though buyers must confirm the dimensions suit their hardware.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Stainless steel material for rust resistance
- Clear, specific dimensions for easy fit checking
- Four springs per pack suits common four-point beds
- 1 mm wire gives a defined compression feel
Cons
- Only suits mounts that accept a 7.4 mm OD and 5.4 mm ID spring
- 50 mm free length may be too tall for some bed setups
- No load rating is specified, so firmness must be judged by trial
Best for
3D printer users replacing or installing spring-loaded heatbed mounts
Not ideal for
Printers whose bed mounts require a different spring diameter or length
Specifications
| Item Type | Spring |
|---|---|
| Material | Stainless Steel |
| Outer Diameter (mm) | 7.4 |
| Inner Diameter (mm) | 5.4 |
| Length (mm) | 50 |
| Size (mm) | 50x7.4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
What's in the box
- 4 x EasyMech 1 mm stainless steel heatbed spacer compression springs, 7.4 mm OD x 5.4 mm ID x 50 mm
Frequently Asked Questions
What are these springs used for?
Will these fit my 3D printer?
How many springs are included?
Are the springs rust resistant?
Do I need any other parts?
How should I care for them?
Overview
The EasyMech 1 mm stainless steel heatbed spacer compression spring is a small but important consumable for anyone building, maintaining or upgrading a 3D printer. It is designed to sit under the heated bed plate, where it supports the bed and allows the mounting screws to be adjusted for levelling. The spring also cushions the plate, helping to isolate it from vibration and small mechanical shocks during printing.
This listing supplies four springs, which matches a common four-point bed mounting layout. Each spring is made from stainless steel wire and measures 7.4 mm outside, 5.4 mm inside and 50 mm in overall length.
Key Features
- Stainless steel construction: the spring material is chosen for resistance to rust and corrosion in workshop conditions.
- Defined dimensions: 7.4 mm outer diameter, 5.4 mm inner diameter and 50 mm length make it easy to check fit before installation.
- 1 mm wire gauge: the wire thickness gives the spring its compression behaviour and load support.
- Four-piece pack: enough for a typical four-corner heatbed mounting arrangement.
- Compression spring format: compresses under load to cushion the bed and allow height adjustment.
Specifications Explained
Outer diameter (7.4 mm): this is the widest point of the spring. Check that the spring seat or recess on your bed mount can accept a spring of this width.
Inner diameter (5.4 mm): the clear space inside the spring. Levelling screws or mounting hardware that pass through the spring should be narrower than this measurement.
Length (50 mm): the free length of the spring before compression. This sets how much standoff the spring provides between the bed and its mounting point.
Wire size (1 mm): the diameter of the stainless steel wire used to form the spring, which influences how firm the spring feels when compressed.
Compatibility and Requirements
These springs are intended for 3D printer heatbed levelling and cushioning. Fit depends on your bed mount: the spring seat should suit a 7.4 mm outer diameter, any screw passing through the centre should be smaller than 5.4 mm, and the available space should accommodate a 50 mm free length. No other compatibility details are specified for this product.
Typical Uses
- Replacing worn, collapsed or corroded springs on a heatbed mounting
- Building a custom bed mount that needs spring-loaded adjustment
- Cushioning a heated bed plate to reduce vibration transfer
- Keeping spare springs on hand for maintenance
What's in the Box
Four EasyMech 1 mm stainless steel heatbed spacer compression springs, each 7.4 mm OD x 5.4 mm ID x 50 mm long.
Quick specs
- Item Type
- Spring
- Material
- Stainless Steel
- Outer Diameter (mm)
- 7.4
- Inner Diameter (mm)
- 5.4
- Length (mm)
- 50
- Size (mm)
- 50x7.4


















