
1 / 6 · Click to enlarge
AI Summary
These stainless steel compression springs are designed for 3D printer heatbed leveling and cushioning. With a 7.4 mm OD, 5.4 mm ID, and 12 mm length, they provide a precise fit for common heatbed mounts.
Key Highlights
- Stainless steel construction for rust resistance
- Outer diameter 7.4 mm, inner diameter 5.4 mm, length 12 mm
- Set of four springs for full heatbed mounting
- Provides leveling and cushioning for the print bed
- Compact size fits common heatbed screws
- Lightweight at just 0.005 kg shipping weight
Ideal For
- 3D printer owners performing maintenance
- Makers building custom 3D printers
- Users upgrading bed leveling hardware
- Workshops with multiple printers needing spares
- Hobbyists looking for reliable bed cushioning
Buying Tip
Measure your existing spring's outer and inner diameters and length before ordering to ensure a proper fit.
Elecvora expert review
Our verdict
These springs are a solid replacement for worn heatbed springs, offering good corrosion resistance and consistent tension. They are straightforward to install and should fit most standard setups.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Stainless steel resists rust
- Precise dimensions for common hardware
- Four-piece set for complete replacement
- Lightweight and compact
Cons
- No screws or nuts included
- May not fit printers with non-standard mounting
- Spring rate not specified
Best for
Standard 3D printers with four-point bed leveling
Not ideal for
Printers requiring specialized spring rates or sizes
Specifications
| Item Type | Spring |
|---|---|
| Material | Stainless Steel |
| Outer Diameter (mm) | 7.4 |
| Inner Diameter (mm) | 5.4 |
| Length (mm) | 12 |
| Size (mm) | 12x7.4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
What's in the box
- 4 x EasyMech 1 mm stainless steel heatbed spacer compression springs
Frequently Asked Questions
What are these springs used for?
Will these fit my 3D printer?
Are screws included?
What material are the springs made of?
How many springs are in the pack?
How should I care for these springs?
Overview
The EasyMech 1 mm stainless steel heatbed spacer compression spring is a reliable choice for maintaining proper bed leveling and reducing vibration in 3D printers. These springs sit between the heatbed and the mounting frame, allowing fine adjustment of the bed height while absorbing shocks during printing. Sold as a set of four, they are suitable for printers with four-point bed mounting.
Key Features
- Stainless steel material for excellent rust and corrosion resistance, ensuring long-lasting performance even in humid environments.
- Precise dimensions of 7.4 mm outer diameter, 5.4 mm inner diameter, and 12 mm free length for compatibility with standard M3 or M4 screws (check your hardware).
- Compression spring design provides consistent force for bed leveling and cushioning, helping to maintain a stable print surface.
- Four-piece set covers the typical four mounting points on most heatbeds.
- Lightweight and compact, with a shipping weight of just 0.005 kg.
Specifications Explained
Outer Diameter (7.4 mm): The outside diameter determines the spring's fit within the mounting hole or bracket. It should be slightly smaller than the recess to allow free movement.
Inner Diameter (5.4 mm): The inside diameter must be large enough to clear the mounting screw. Typically, M3 screws (3 mm) or M4 screws (4 mm) will pass through easily, but always verify your screw size.
Length (12 mm): This is the free length of the spring when uncompressed. Under load, it compresses to provide tension. The 12 mm length offers a good balance between adjustability and stability for most heatbeds.
Material (Stainless Steel): Stainless steel resists rust, making these springs suitable for long-term use without degradation.
Compatibility and Requirements
These springs are designed for 3D printer heatbeds that use compression springs for leveling. They are compatible with common heatbed mounting setups where the spring fits over a screw between the bed and the frame. No additional hardware is included; you will need your existing screws and nuts. Always check that the inner diameter (5.4 mm) is sufficient for your screws and that the outer diameter (7.4 mm) fits your mounting holes.
Typical Uses
- Replacing worn or lost heatbed springs on Cartesian and Delta 3D printers.
- Upgrading stock springs for better leveling stability.
- Custom 3D printer builds requiring reliable bed suspension.
- Maintenance and repair of existing printers.
What's in the Box
4 x EasyMech 1 mm stainless steel heatbed spacer compression springs.
Quick specs
- Item Type
- Spring
- Material
- Stainless Steel
- Outer Diameter (mm)
- 7.4
- Inner Diameter (mm)
- 5.4
- Length (mm)
- 12
- Size (mm)
- 12x7.4


















