
1 / 3 · Click to enlarge
AI Summary
A pack of ten M4 x 20mm hex socket countersunk screws in grade 10.9 high tensile steel with a black oxide finish. The countersunk head sits flush while the hex drive gives controlled, reliable tightening.
Key Highlights
- M4 thread, 20mm length, 0.7mm pitch machine screw
- Grade 10.9 high tensile steel for load-bearing joints
- Countersunk head for a flush, snag-free surface
- Black oxide coating protects the surface finish
- 2.5mm hex socket drive for controlled torque transfer
- Ten screws per pack for builds and spares
Ideal For
- Robotics builders assembling frames and chassis plates
- Makers fastening metal enclosures and brackets
- Workshop users who need flush-head M4 hardware on hand
- DIYers repairing machinery panels and fixtures
- Fabricators working on precision plate assemblies
Buying Tip
Confirm your hole is chamfered for a countersunk head and that you have a 2.5mm Allen key ready, since neither a key nor nuts are included.
Elecvora expert review
Our verdict
A sensible choice when you need flush M4 fastening with more strength than a basic screw provides. The grade 10.9 steel and hex drive make tightening predictable, provided your holes are prepared correctly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Grade 10.9 high tensile steel suits load-bearing joints
- Countersunk head gives a clean flush finish
- Hex socket transfers torque without cam-out
- Black oxide finish protects the surface
- Ten per pack covers small assemblies and spares
Cons
- Requires a separate 2.5mm Allen key
- Needs a chamfered hole to sit flush
- Black oxide is surface protection, not a guarantee against prolonged moisture
Best for
Robotics, enclosure and machinery assemblies needing flush M4 fasteners
Not ideal for
Projects without a chamfered hole or a 2.5mm hex key on hand
Specifications
| Shipping Weight | 0.019 kg |
|---|---|
| Shipping Dimensions | 10 × 8 × 2 cm |
What's in the box
- 10 x EasyMech M4 x 20mm Hex (Allen) CSK High Tensile (10.9) Black Oxide Screw
Frequently Asked Questions
What driver do these screws need?
Will the head sit flush?
What does grade 10.9 mean?
How many screws are included?
Can I use these in damp or outdoor conditions?
What is the thread pitch?
Overview
The EasyMech M4 x 20mm Hex CSK screw is a countersunk machine screw built for assemblies where the fastener head should disappear into the surface. It combines a 4mm thread diameter with a 20mm length, a 0.7mm pitch and a hex socket drive that accepts a 2.5mm Allen key. The body is high tensile steel at strength grade 10.9, and the black oxide finish adds surface protection along with a clean dark appearance.
Because the head is countersunk, it seats into a matching chamfer and tightens down flush with the material. That makes it a practical choice for panels, plates and frames where a protruding head would catch on hands, cables or moving parts.
Key Features
- High tensile grade 10.9 steel: made for fastening jobs that carry real load rather than light decorative work.
- Countersunk (CSK) head: pulls down flush for a smooth finished surface.
- Hex socket drive: the 2.5mm Allen key engages fully, so torque goes into the thread instead of slipping off the head.
- Black oxide finish: helps protect the steel surface and keeps the hardware looking consistent.
- Precision 0.7mm pitch thread: engages steadily for a firm, stable hold.
- Vibration-resistant hold: stays seated in dynamic assemblies such as moving frames and machinery.
Specifications Explained
Thread size and length
M4 means a 4mm nominal thread diameter, and 20mm is the screw length. Together they suit brackets, plates and frame members thick enough to take a 4mm fastener without the tip breaking through. Check your material stack before ordering, since length is measured on the screw as supplied.
Strength grade 10.9
Grade 10.9 indicates a high tensile steel class, so the screw is intended for joints that see tension and shear rather than purely cosmetic fixing. Match it with suitable nuts or threaded inserts of comparable strength.
Countersunk head
The CSK profile needs a countersunk or deburred hole so the head can sit flush. Used this way, it leaves no raised edge on the finished surface.
Drive and finish
The hex socket takes a 2.5mm Allen key, which gives a positive engagement for tightening and loosening. Black oxide is a surface treatment, so treat it as protection for the finish rather than a guarantee against long-term exposure to moisture.
Compatibility and Requirements
You will need a 2.5mm hex (Allen) key to drive these screws, plus a matching M4 nut, threaded insert or tapped hole for the joint. The countersunk head requires a chamfered hole to sit flush. No driver or key is included in the pack.
Typical Uses
- Robotics frames and chassis assemblies
- Metal frameworks, brackets and enclosures
- Machinery panels and general fabrication
- DIY builds and workshop repairs
- Precision assemblies needing a flush finish
What's in the Box
10 x EasyMech M4 x 20mm Hex (Allen) CSK High Tensile (10.9) Black Oxide Screws.
















