
1 / 3 · Click to enlarge
AI Summary
EasyMech M5 x 12mm countersunk screws in SS 304 stainless steel with a 3 mm hex drive. The flush head and corrosion-resistant body make them a tidy, dependable choice for robotics and electronics assemblies.
Key Highlights
- SS 304 stainless steel body resists rust and corrosion
- Countersunk head sits flush for a smooth surface finish
- Internal hex drive accepts a 3 mm Allen key
- M5 thread with 0.8 mm pitch and 12 mm length
- Full thread supports stable clamping under vibration
- Pack of ten screws for prototyping and repairs
Ideal For
- Robotics builders assembling chassis plates and brackets
- Electronics makers fitting enclosures and panels
- RC and FPV hobbyists who need flush frame hardware
- Workshop users replacing corroded or missing M5 screws
- Light industrial and DIY assembly projects
Buying Tip
Measure your material stack and confirm the countersink depth before ordering, because the 12 mm length includes the head and must reach the mating thread.
Elecvora expert review
Our verdict
A sensible, well-finished fastener for builders who want a flush head and stainless steel durability. The 3 mm hex drive and full M5 thread make installation straightforward, provided your parts have the right chamfer and thread depth.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- SS 304 stainless steel resists corrosion
- Countersunk head gives a clean flush finish
- 3 mm hex drive offers secure torque transfer
- Full thread supports stable clamping
- Pack of ten covers small builds and spares
Cons
- Requires a matching countersink in the top part
- Allen key is not included
- 12 mm length may be short for thick stacks
Best for
Robotics, electronics and general assembly work needing flush M5 fasteners
Not ideal for
Marine-grade or high-salt environments where a more corrosion-resistant alloy is required
Specifications
| Shipping Weight | 0.022 kg |
|---|---|
| Shipping Dimensions | 6 × 4 × 3 cm |
What's in the box
- 10 x EasyMech M5 x 12mm Hex (Allen) CSK SS 304 Screws
Frequently Asked Questions
What size Allen key do these screws need?
Are these screws suitable for outdoor use?
What is the thread pitch and length?
How many screws are included?
Do I need a countersink for these screws?
Can I reuse these screws?
Overview
The EasyMech M5 x 12mm Hex (Allen) CSK SS 304 Screw is a metric fastener made for assemblies that need a flat, tidy surface. The countersunk head seats into a matching chamfer so the top of the screw finishes level with the surrounding material. That makes it a useful choice for robot frames, control panels, enclosures and other builds where a protruding head would catch or look untidy.
Each screw is formed from SS 304 stainless steel with a silver finish. The material is chosen for everyday corrosion resistance, so the screws hold up in workshops, outdoor enclosures and humid environments better than plain steel alternatives.
Key Features
- SS 304 stainless steel: provides good resistance to rust and corrosion for long service life.
- Countersunk (CSK) head: creates a flush, professional surface when used with a matching chamfer.
- Hex (Allen) drive: accepts a 3 mm key for secure tightening with reduced slipping.
- Full metric thread: M5 diameter with a 0.8 mm pitch and 12 mm length for reliable clamping.
- Vibration stability: full thread engagement helps limit loosening in moving assemblies.
- Pack of ten: enough fasteners for small builds, repairs and spares.
Specifications Explained
M5 thread: the 5 mm nominal diameter is a common metric size for brackets, plates and frame joints. The 0.8 mm pitch is the standard coarse pitch for M5, so the screws match widely available M5 nuts and threaded parts.
12 mm length: this is the overall screw length, and because the head is countersunk, most of that length is threaded. Check your material stack before ordering so the screw reaches through the parts without bottoming out.
3 mm hex drive: the internal socket takes a standard 3 mm Allen key. A hex drive transfers torque cleanly and is less likely to cam out than a cross-head when used with the correct key size.
SS 304 finish: the silver stainless finish is suitable for indoor and outdoor use. It is not a substitute for a marine-grade alloy in salt-heavy settings, but it handles normal workshop and enclosure conditions well.
Compatibility and Requirements
These screws require a matching countersunk chamfer in the top part and an M5 threaded hole or nut on the receiving side. You will also need a 3 mm Allen key, which is not included. The 12 mm length and 0.8 mm pitch should be checked against your plate thickness and thread depth before installation.
Typical Uses
- Robot chassis plates, brackets and sensor mounts
- Electronics enclosures and control panels
- RC and FPV frame hardware where a flush head is preferred
- Light industrial jigs, fixtures and general assembly work
- Outdoor projects that need a corrosion-resistant fastener
What's in the Box
Ten EasyMech M5 x 12mm Hex (Allen) CSK SS 304 Screws. No Allen key or other tools are included.
















