Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An M5 x 45mm countersunk machine screw with a hex socket drive, made from 10.9 high tensile steel with a black oxide finish. The flush head and 3mm Allen drive make it easy to seat neatly and tighten firmly in metal and robotics assemblies.

Key Highlights

  • M5 x 45mm machine screw with 0.8mm thread pitch
  • Grade 10.9 high tensile steel for loaded joints
  • Countersunk head sits flush after installation
  • 3mm hex socket drive for controlled torque
  • Black oxide coating for surface protection
  • Pack of ten screws for multi-point assemblies

Ideal For

  • Robotics builders assembling aluminium and steel frames
  • Makers building enclosures and equipment panels
  • Mechanical engineers working on metal frameworks
  • DIY hobbyists who need flush M5 fasteners
  • Workshop users replacing worn or missing machine screws

Buying Tip

Check that your hole is countersunk and that you have a 3mm Allen key on hand before ordering, since neither the chamfer nor the tool is supplied with the screws.

Elecvora expert review

Our verdict

A well-specified M5 countersunk screw for anyone who needs a flush, load-bearing fastening point in metal or robotics work. The 10.9 grade and black oxide finish make it a dependable choice for workshop and fabrication use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Grade 10.9 high tensile steel suits loaded joints
  • Countersunk head gives a clean flush finish
  • Hex socket drive transfers torque reliably
  • Black oxide finish protects the surface
  • Standard M5 x 0.8mm thread fits common hardware

Cons

  • Allen key is not included
  • Requires a countersunk hole for a flush fit
  • Sold only in a pack of ten

Best for

Flush fastening in robotics, metal frameworks and equipment panels

Not ideal for

Light decorative work where a standard low-grade screw would do

Specifications

Shipping Weight0.059 kg
Shipping Dimensions5 × 3 × 3 cm

What's in the box

  • 10 x EasyMech M5 x 45mm Hex Socket Countersunk Screws

Frequently Asked Questions

What size Allen key does this screw use?
It uses a 3mm hex (Allen) key. The tool is not included with the screws.
What does M5 x 45mm mean?
M5 is the thread diameter at 5mm, and 45mm is the screw length. The thread pitch is 0.8mm.
Will the head sit flush with the surface?
Yes, provided the hole is countersunk to match. Without a chamfer the head will sit proud of the surface.
What is grade 10.9 steel?
It is a high tensile strength class, intended for fastening applications that carry load or vibration.
How many screws are included?
The pack contains ten EasyMech M5 x 45mm hex socket countersunk screws.
Does the black oxide finish prevent rust?
The black oxide coating adds surface protection and durability, but it is a finish rather than a guarantee against corrosion in all environments.

Overview

The EasyMech M5 x 45mm Hex Socket Countersunk Screw is a machine fastener made for joints that need a flat, unobtrusive finish. Because the head is countersunk, it draws down into a matching chamfer and leaves the surface clear once tightened. The hex socket drive accepts a 3mm Allen key, so torque goes straight into the thread rather than slipping off the head.

This screw is produced in grade 10.9 high tensile steel with a black oxide finish, making it a sensible pick for robotics frames, metalwork, enclosures and workshop projects where standard hardware may not be strong enough.

Key Features

  • Countersunk head: produces a flush surface after installation, useful where parts must sit flat against each other.
  • Hex socket drive: a 3mm Allen key engages fully for controlled tightening.
  • Grade 10.9 steel: high tensile construction for fastening under load.
  • Black oxide finish: adds surface protection and a consistent dark look.
  • Standard M5 thread: 0.8mm pitch fits common M5 threaded assemblies.

Specifications Explained

Thread size and length

M5 refers to a 5mm nominal thread diameter, and the 45mm figure is the screw length. The 0.8mm pitch is the standard coarse pitch for M5, so the screw threads into ordinary M5 nuts, inserts and tapped holes.

Strength grade

Grade 10.9 indicates a high tensile steel class. In practice this means the screw is intended for joints that carry load or see repeated stress, rather than light decorative fixing.

Head and drive

The countersunk profile needs a matching chamfered hole to sit flush. The hex socket takes a 3mm Allen key, giving a secure grip for tightening and loosening.

Compatibility and Requirements

Use with M5 threaded nuts, inserts or tapped holes at 0.8mm pitch. A 3mm hex (Allen) key is required and is not included. For a flush result, the receiving hole should be countersunk to match the head angle.

Typical Uses

  • Robotics and mechanical frame assembly
  • Metal brackets, plates and frameworks
  • Enclosures and equipment panels
  • General fabrication and DIY engineering projects

What's in the Box

Ten EasyMech M5 x 45mm hex socket countersunk screws. The Allen key is not part of the pack.

Quick specs

Shipping Weight
0.059 kg
Shipping Dimensions
5 × 3 × 3 cm
See all specifications