Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 25-piece set of EasyMech M5x12mm HT socket button head cap Allen bolts in black mild steel. The low-profile button head and 2 mm hex drive make them ideal for tight-clearance, finished-looking assemblies.

Key Highlights

  • 25 pieces of M5 x 12 mm button head Allen bolts
  • Heat-treated mild steel for higher strength
  • Low-profile button head with larger bearing surface
  • 2 mm Allen key required (not included)
  • Black finish for a clean, finished look
  • Compact 6 x 5 x 3 cm package, 89 g

Ideal For

  • Robotics hobbyists building chassis
  • RC and drone enthusiasts
  • DIY makers and repairers
  • Light machinery and equipment assembly
  • Anyone needing low-profile fasteners

Buying Tip

Check that you have a 2 mm Allen key on hand, as it is not included and is required for these bolts.

Elecvora expert review

Our verdict

These EasyMech M5x12mm button head bolts are a practical choice for light to medium-duty fastening where a low profile and neat finish are needed. The heat-treated steel adds strength, but the small 2 mm Allen key requires care to avoid stripping.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Low-profile button head fits tight spaces
  • Heat-treated for higher strength
  • Black finish looks professional
  • Convenient 25-piece pack

Cons

  • Requires a separate 2 mm Allen key
  • Not suitable for countersunk applications
  • Mild steel may corrode in wet environments

Best for

Robotics, RC and DIY projects needing low-profile fasteners

Not ideal for

High-corrosion or high-load structural applications

Specifications

Size (mm)M5 X 12
MaterialMild Steel
Quantity25 Pcs
Bolt Head Diameter (mm)5.6
Bolt Body Diameter (mm)3
Length of Bolt12 mm
ColorBlack
Nut TypeHex
Thread Pitch (mm)0.7
Required Allen Key Size (mm)2
Shipping Weight0.089 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 25 x EasyMech M5x12mm HT Socket Button Head Cap Allen Bolts

Frequently Asked Questions

What size Allen key do these bolts need?
These bolts require a 2 mm Allen key, which is not included in the package.
What is the thread size and pitch?
They have an M5 thread with a 0.7 mm pitch.
How is the length measured?
The 12 mm length is measured from under the head to the tip of the bolt.
Can these be used with standard M5 nuts?
Yes, they are compatible with standard M5 nuts and threaded holes.
Are these bolts corrosion resistant?
They are made of mild steel with a black finish, which offers limited corrosion resistance. For wet or outdoor use, additional protection is recommended.
What is included in the package?
The package contains 25 bolts. No nuts or Allen key are included.

Overview

The EasyMech M5x12mm HT Socket Button Head Cap Allen Bolt set contains 25 black mild steel bolts designed for fastening where a low head profile and a neat appearance are important. The button head offers a larger bearing surface than a standard socket head cap screw, which helps spread load on thin or soft materials. The socket drive accepts a 2 mm Allen key, allowing tightening in areas where a wrench or socket would not fit. These bolts are heat-treated (HT) for improved strength compared with ordinary mild steel fasteners, making them suitable for light to medium-duty assemblies, robotics chassis and DIY projects.

Key Features

  • Button head design: Provides a wider bearing area and a lower profile than a standard socket head, ideal when countersinking is not possible.
  • Hex socket drive: Requires a 2 mm Allen key for a secure, slip-resistant grip during installation and removal.
  • Heat-treated mild steel: Offers higher strength than standard mild steel for demanding applications.
  • Black finish: Gives a clean, finished look to your project.
  • Compact pack: 25 bolts in a small 6 x 5 x 3 cm package weighing approximately 89 g.

Specifications Explained

Size M5 x 12 mm: The M5 thread diameter is approximately 5 mm, and the 12 mm length is measured from under the head to the tip. This size is common for small brackets, plates and motor mounts.

Thread pitch 0.7 mm: A fine pitch that provides more threads per millimetre for better grip in thin materials and improved resistance to vibration loosening.

Bolt head diameter 5.6 mm: The button head is slightly wider than the thread, giving a good bearing surface without excessive overhang.

Bolt body diameter 3 mm: Note that this refers to the shank diameter at the unthreaded portion; the threaded section is M5. The required Allen key size is 2 mm.

Compatibility and Requirements

These bolts require a 2 mm Allen key (not included) for installation. They are compatible with standard M5 nuts and threaded holes. The button head style is not designed for countersunk applications; use flat head screws if you need a flush finish. For high-strength applications, ensure the mating material and nut can handle the load.

Typical Uses

  • Robotics chassis assembly
  • RC and drone frame fastening
  • DIY mechanical projects
  • Light to medium-duty fittings
  • Equipment where a finished look is desired

What's in the Box

25 x EasyMech M5x12mm HT Socket Button Head Cap Allen Bolts.

Quick specs

Size (mm)
M5 X 12
Material
Mild Steel
Quantity
25 Pcs
Bolt Head Diameter (mm)
5.6
Bolt Body Diameter (mm)
3
Length of Bolt
12 mm
See all specifications