Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 25-piece pack of EasyMech M5 x 20mm socket button head Allen bolts in black mild steel, each with a 3mm hex drive. The low button head gives a neat finish and a wider bearing surface where space is tight.

Key Highlights

  • 25 identical M5 x 20mm bolts per pack
  • Low-profile button head with 9.2mm diameter
  • 3mm Allen key drive for quick tightening
  • Black mild steel construction with 0.7mm thread pitch
  • Suits robotics chassis, RC builds and light fabrication
  • Compact pack weight of about 0.105kg

Ideal For

  • Robotics hobbyists assembling chassis frames
  • RC and hobby builders needing compact fasteners
  • DIY makers working on brackets and panels
  • Workshop users stocking common M5 hardware
  • Students and prototyping teams building mechanical projects

Buying Tip

Confirm you have a 3mm Allen key and matching M5 nuts or threaded inserts before ordering, since neither is included in the pack.

Elecvora expert review

Our verdict

A sensible bulk pack of M5 button head bolts for builders who want a tidy, low-profile fastener without hunting for single pieces. The mild steel construction and black finish suit general mechanical and hobby work well.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 25-piece pack covers a full small assembly
  • Low button head fits tight clearances
  • Common 3mm Allen drive is easy to source
  • Fine 0.7mm pitch gives controlled tightening

Cons

  • Allen key and nuts are not included
  • Mild steel offers limited corrosion resistance
  • Not intended for high-load structural joints

Best for

Robotics, RC and DIY assemblies needing a compact M5 fastener

Not ideal for

Outdoor or wet environments where corrosion resistance is critical

Specifications

Size (mm)M5 X 20
MaterialMild Steel
Quantity25 Pcs
Bolt Head Diameter (mm)9.2
Length of Bolt20 mm
ColorBlack
Nut TypeHex
Thread Pitch (mm)0.7
Required Allen Key Size (mm)3
Shipping Weight0.105 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 25 x EasyMech M5x20mm HT Socket Button Head Cap Allen Bolts

Frequently Asked Questions

What size Allen key do these bolts need?
They use a 3mm Allen key. The key is not included, so have one ready before assembly.
Is the 20mm length measured from the head?
Yes, for button head bolts the length is measured from under the head to the tip of the thread.
What thread pitch do these M5 bolts have?
They have a 0.7mm thread pitch, so match them with M5 nuts or inserts of the same pitch.
Are nuts included in the pack?
No. The pack contains 25 bolts only, with no nuts or washers.
Can these be used in outdoor projects?
They are black mild steel, so they are better suited to indoor or dry conditions where corrosion is not a major concern.
How should I store the bolts?
Keep them in a dry container or compartment tray to limit moisture exposure and keep the set organised.

Overview

The EasyMech M5x20mm HT Socket Button Head Cap Allen Bolt set is a practical fastening solution for builders who need a clean, low-profile head. Each bolt has an M5 thread, a 20mm length measured from under the head, and a 0.7mm thread pitch. The button head measures 9.2mm across and uses a 3mm Allen key, so installation is straightforward with a common hex driver.

Made from black mild steel, these bolts are supplied in a pack of 25. The button head shape offers a wider bearing surface than a standard socket head while sitting lower than a conventional hex bolt, which helps in tight spaces and on thinner materials.

Key Features

  • Low button head profile: a neat, rounded finish that sits close to the surface.
  • Wider bearing area: the 9.2mm head spreads clamping load across the workpiece.
  • Simple hex drive: a 3mm Allen key is all you need for tightening and removal.
  • Consistent pack: 25 bolts of the same size for complete assemblies.
  • Black mild steel: a neutral finish that blends into most builds.

Specifications Explained

Thread and length

M5 refers to the thread diameter, and 20mm is the length measured from beneath the head. The 0.7mm pitch is a fine thread that gives controlled tightening on metal and plastic parts.

Head and drive

The button head is 9.2mm in diameter and takes a 3mm Allen key. This combination keeps the head compact while still offering a good grip for the tool.

Material and finish

Mild steel with a black finish suits general mechanical work. It is not a high-corrosion coating, so consider the environment where the bolts will be used.

Compatibility and Requirements

These bolts require a 3mm Allen key, which is not included. They match M5 threaded nuts, inserts or tapped holes with a 0.7mm pitch. Check that your material thickness and clearance allow for the 9.2mm button head before final assembly.

Typical Uses

  • Robotics chassis assembly and frame joints
  • RC and hobby mechanical builds
  • Brackets, panels and light fabrication
  • DIY repair and prototyping work
  • General workshop fastening where a low head is useful

What's in the Box

The pack contains 25 EasyMech M5x20mm HT socket button head cap Allen bolts. No Allen key or nuts are included.

Quick specs

Size (mm)
M5 X 20
Material
Mild Steel
Quantity
25 Pcs
Bolt Head Diameter (mm)
9.2
Length of Bolt
20 mm
Color
Black
See all specifications