Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of ten M6 x 8mm countersunk machine screws in 10.9 high tensile steel with a black oxide finish. The hex socket drive and flush head make them ideal for clean, secure fastening in robotics, machinery and DIY assemblies.

Key Highlights

  • M6 thread with 8 mm length and 1.0 mm pitch
  • 10.9 grade high tensile steel for demanding fastening
  • Countersunk head sits flush after installation
  • Hex socket drive suits a 4 mm Allen key
  • Black oxide coating for surface protection
  • Pack of ten machine screws for workshop use

Ideal For

  • Robotics builders assembling metal frames and brackets
  • Makers fastening electronic enclosures and panels
  • Workshop users needing flush M6 fasteners
  • Fabricators working on light metal frameworks
  • DIY hobbyists repairing or building mechanical assemblies

Buying Tip

Measure your plate thickness and confirm the hole is chamfered for a countersunk head, since an 8 mm screw leaves little thread beyond a thick panel.

Elecvora expert review

Our verdict

A well-specified countersunk machine screw for builders who want a flush finish and dependable strength. The 10.9 grade and hex socket drive make it a solid choice for mechanical and robotics work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Flush countersunk head for clean surfaces
  • 10.9 high tensile steel
  • Hex socket drive for good torque control
  • Black oxide finish
  • Sold in a pack of ten

Cons

  • Only ten screws per pack
  • Requires a separate 4 mm Allen key
  • 8 mm length limits use on thick panels

Best for

Flush fastening in robotics, machinery and enclosure builds

Not ideal for

Thick panels needing long thread engagement

Specifications

Shipping Weight0.025 kg
Shipping Dimensions5 × 3 × 3 cm

What's in the box

  • 10 x EasyMech M6 x 8mm Hex Socket CSK High Tensile 10.9 Black Oxide Screws

Frequently Asked Questions

What size Allen key does this screw use?
It uses a 4 mm hex (Allen) key.
What does countersunk mean?
The head is shaped to sit flush with the surface when used in a chamfered hole.
What material are these screws made from?
They are made from 10.9 grade high tensile steel with a black oxide finish.
How many screws are included?
The pack contains ten M6 x 8mm screws.
What is the thread pitch?
The pitch is 1.0 mm, the standard coarse pitch for M6.
Can these be used outdoors?
The black oxide finish offers surface protection, but for prolonged outdoor exposure check suitability for your environment.

Overview

The EasyMech M6 x 8mm hex socket countersunk screw is a machine screw built for fastening where a flat, flush finish matters. The countersunk head pulls down into a matching chamfered hole, so the top of the screw ends up level with the surrounding surface rather than standing proud of it. That makes this screw a sensible pick for plates, panels, brackets and enclosures where a clean exterior is part of the design.

It is made from 10.9 grade high tensile steel, a strength class suited to load-bearing mechanical assemblies. The black oxide finish gives the screw a dark, uniform look and adds a layer of surface protection, while the hex socket drive lets you apply torque evenly with a standard Allen key.

Key Features

  • Countersunk head: seats flush for a smooth, low-profile joint.
  • 10.9 high tensile steel: chosen for heavy-duty fastening tasks.
  • Hex socket drive: transfers torque cleanly and resists cam-out.
  • Black oxide finish: improves surface durability and appearance.
  • Precision thread: 1.0 mm pitch for a stable, secure grip.
  • Vibration-resistant hold: keeps assemblies stable in dynamic conditions.

Specifications Explained

M6 thread, 8 mm length: the 6 mm nominal diameter pairs with an M6 threaded hole or nut, and the 8 mm length suits thin plates and shallow joints. Check your material thickness before ordering, since a countersunk screw uses part of its length inside the chamfer.

1.0 mm pitch: this is the standard coarse pitch for M6, so the screw threads into common M6 nuts and tapped holes.

10.9 strength grade: a higher tensile class than mild steel fasteners, useful where joints carry load or see vibration.

4 mm Allen key: the hex socket takes a 4 mm key, a common size in most tool kits.

Compatibility and Requirements

These screws require an M6 threaded hole or nut and a countersunk (chamfered) hole for the head to sit flush. You will also need a 4 mm Allen key or hex bit to drive them. No other accessories are included.

Typical Uses

Common applications include machinery assemblies, metal frameworks, electronic enclosures, robotics builds, fabrication work and general DIY projects where a flush M6 fastener is needed.

What's in the Box

Ten EasyMech M6 x 8mm hex socket countersunk screws in 10.9 high tensile steel with black oxide finish.

Quick specs

Shipping Weight
0.025 kg
Shipping Dimensions
5 × 3 × 3 cm
See all specifications