
1 / 3 · Click to enlarge
AI Summary
A 12-piece set of M3x8mm socket head cap bolts paired with hex nuts, made from mild steel with a black finish. The recessed 2.5mm Allen drive keeps the tool engaged for confident tightening on small assemblies.
Key Highlights
- 12 matching M3x8mm bolts and hex nuts per pack
- Recessed socket drive takes a standard 2.5mm Allen key
- Mild steel body with black matte finish
- 5.4mm head diameter for a broader bearing surface
- Hex nuts with 3mm inner and 16mm outer diameter
- Light pack at about 14g for the full set
Ideal For
- Robotics builders assembling small chassis frames
- Makers and DIY hobbyists working on brackets and enclosures
- Electronics technicians fastening cases and panels
- Repair shops keeping small metric fasteners on hand
- Students and workshop learners practising metric assembly
Buying Tip
Confirm you have a 2.5mm Allen key and that your parts allow a 5.4mm head diameter and 8mm bolt length before ordering.
Elecvora expert review
Our verdict
A tidy, practical small-fastener set that covers a full 12-point assembly in one pack. The socket head and standard 2.5mm drive make it easy to work with on compact builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Matched bolts and nuts in one pack
- Recessed socket drive resists slipping
- Standard 2.5mm Allen key requirement
- Broad 5.4mm head bearing surface
- Light and easy to store
Cons
- Allen key is not included
- Mild steel is not a high-corrosion alloy
- Only one length and diameter per pack
Best for
Small robotics, DIY and enclosure assembly
Not ideal for
Heavy structural or high-corrosion outdoor use
Specifications
| Size (mm) | M3 X 8 |
|---|---|
| Material | Mild Steel |
| Quantity | 12 |
| Bolt Head Diameter (mm) | 5.4 |
| Bolt Body Diameter (mm) | 3 |
| Length of Bolt | 8 mm |
| Color | Black |
| Nut Type | Hex |
| Inner Diameter (mm) | 3 |
| Outer Diameter (mm) | 16 |
| Weight (g) | 14 ( for 12 set pack) |
| Required Allen Key Size (mm) | 2.5 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 12 x M3x8mm socket head cap bolts
- 12 x M3 hex nuts
Frequently Asked Questions
What size Allen key do these bolts need?
Can I use the bolts without the nuts?
What is the thread size and length?
How many pieces are in the pack?
What material are they made from?
What are the nut dimensions?
Overview
The EasyMech M3x8mm Socket Head Cap Bolt and Nut set is a compact fastening kit for small mechanical work. You get 12 bolts and 12 hex nuts, all in the M3x8mm size, packed together so a single purchase covers a full small assembly. Each bolt uses a recessed internal socket drive, which means the Allen key sits down inside the head rather than on the outside edges. That design gives a clean, well-tooled appearance and helps the tool stay seated while you tighten.
Key Features
- Matched bolt and nut pairs: 12 bolts and 12 hex nuts in the same M3x8mm size.
- Socket head design: the recessed drive adds strength and reduces slipping.
- Standard tooling: a 2.5mm Allen key is all you need for the bolts.
- Mild steel construction: a practical material for general fastening tasks.
- Black finish: a matte look that suits both visible and hidden fixings.
Specifications Explained
The M3x8mm label tells you the thread size and length. The bolt body measures 3mm across, so it passes through a 3mm clearance hole, and the shaft is 8mm long. The head is 5.4mm in diameter, giving a wider contact patch than a small pan head, which helps spread load on thin plates and plastic parts. The hex nuts have a 3mm inner diameter to match the thread and a 16mm outer diameter across the flats. The required Allen key is 2.5mm. The full 12-piece pack weighs about 14g, and the shipping pack measures roughly 8 x 6 x 3cm.
Compatibility and Requirements
You will need a 2.5mm Allen key to drive these bolts; it is not included. The nuts suit the same M3 thread, so the bolts can also be threaded directly into a compatible M3 female hole when a nut is not wanted. Check that your parts have clearance for a 5.4mm head and that the 8mm length suits your material thickness.
Typical Uses
These fasteners suit robotics chassis assembly, small brackets, electronic enclosures, hobby frames and light equipment fittings. They are also handy for general DIY repairs where a tidy socket head is preferred over an exposed hex head.
What's in the Box
One EasyMech set containing 12 M3x8mm socket head cap bolts and 12 matching hex nuts.
Quick specs
- Size (mm)
- M3 X 8
- Material
- Mild Steel
- Quantity
- 12
- Bolt Head Diameter (mm)
- 5.4
- Bolt Body Diameter (mm)
- 3
- Length of Bolt
- 8 mm
















