Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12-piece set of M4x40mm socket head Allen bolts with matching hex nuts in mild steel. The deep hex socket grips a 3mm Allen key firmly, so tightening stays slip-free during assembly work.

Key Highlights

  • 12 complete sets of M4x40mm socket head bolts and hex nuts
  • Deep hex socket drive resists slipping with a 3mm Allen key
  • Mild steel construction with a black matte finish
  • 4mm bolt body and 6.9mm head diameter for compact fittings
  • Hex nuts with 4mm inner and 7mm outer diameter
  • Total pack weight around 50g for all 12 sets

Ideal For

  • Robotics hobbyists assembling chassis frames
  • Electronics makers mounting components and enclosures
  • DIY builders working on small to medium fittings
  • Students and workshop users learning mechanical assembly
  • Maintenance users keeping spare fasteners on the bench

Buying Tip

Confirm that a 3mm Allen key is available and check the 40mm bolt length against your panel or bracket thickness before ordering.

Elecvora expert review

Our verdict

A tidy, no-fuss fastener pack that covers a common M4 size with matching nuts included. The deep socket drive and mild steel build make it a sensible bench staple for robotics and DIY work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bolts and nuts supplied together in matched sets
  • Deep hex socket reduces tool slippage
  • Compact 6.9mm head suits tight spaces
  • Light pack weight makes storage easy

Cons

  • A 3mm Allen key is not included
  • Mild steel may need care in damp environments
  • Only 12 sets per pack, so larger builds need multiples

Best for

Robotics and DIY builders needing a small, tidy M4 fastener set

Not ideal for

High-corrosion outdoor or marine applications

Specifications

Size (mm)M4 X 40
MaterialMild Steel
Quantity12
Bolt Head Diameter (mm)6.9
Bolt Body Diameter (mm)4
Length of Bolt40 mm
ColorBlack
Nut TypeHex
Inner Diameter (mm)4
Outer Diameter (mm)7
Weight (g)50 ( for 12 set pack)
Shipping Weight0.02 kg
Shipping Dimensions8 × 5 × 4 cm

What's in the box

  • 1 x EasyMech Set of M4x40mm Socket Head Cap (Allen) Bolt and Nut, 12 pieces

Frequently Asked Questions

What size Allen key do these bolts need?
They require a 3mm Allen key, which is not included in the pack.
Can I use the bolts without the nuts?
Yes, they can be installed directly into a compatible female threaded hole instead of using the supplied nuts.
What material are the bolts and nuts made from?
Both the bolts and nuts are made from mild steel with a black finish.
How many pieces are in the pack?
The pack contains 12 sets, each with one M4x40mm socket head bolt and one hex nut.
What are the nut dimensions?
The hex nuts have a 4mm inner diameter and a 7mm outer diameter.
How should I store the fasteners?
Keep them in a dry container and check for surface condition before use, especially in damp workshops.

Overview

The EasyMech M4x40mm Socket Head Cap Bolt and Nut set is a practical fastening kit for builders who want a neat, tooled appearance on their assemblies. Each set contains one socket head Allen bolt and one hex nut, and the pack includes 12 sets. Both parts are made from mild steel with a black finish, giving a uniform look across a project while offering the strength needed for small and medium fittings.

The socket head design uses a recessed internal hex drive, which keeps the drive area protected and helps prevent the tool from slipping when you tighten by hand. This makes the set a sensible choice for robotics chassis assembly, electronics work and general DIY tasks where access can be awkward.

Key Features

  • Socket head Allen drive: the recessed hex socket takes a 3mm Allen key and holds the tool securely during tightening.
  • Deep hex groove: the deeper angular groove reduces slippage and makes hand tightening more convenient.
  • Matched bolt and nut: every bolt comes with a hex nut sized to its M4 thread, so you are not hunting for a separate nut.
  • Mild steel body: a durable material choice for everyday mechanical and electronic assemblies.
  • Black finish: gives the fasteners a consistent, low-glare appearance on finished builds.

Specifications Explained

M4 x 40mm describes the thread size and the bolt length: a 4mm body diameter with a 40mm shaft. That length suits assemblies where you need to pass through a bracket or panel and still have room for the nut.

Head and nut dimensions matter for clearance. The bolt head measures 6.9mm across, and the hex nut has a 4mm inner diameter and a 7mm outer diameter. Check these figures against your hole spacing and the space around the fixing point before you order.

Drive size: a 3mm Allen key is required. Having the correct key on hand is essential, since the socket is sized specifically for it.

Weight: the full 12-set pack weighs approximately 50g, so it adds very little bulk to a build or a toolbox.

Compatibility and Requirements

These fasteners are designed to be used as a bolt-and-nut pair, with the nut threading onto the bolt. They can also be installed directly into a compatible female threaded hole if you prefer not to use the nut. A 3mm Allen key is required for installation and is not included in the pack.

Typical Uses

Common applications include robotics chassis assembly, small and medium mechanical fittings, electronic component mounting, DIY projects and light-duty equipment work. The compact head and neat finish also suit visible assemblies where appearance matters.

What's in the Box

1 x EasyMech Set of M4x40mm Socket Head Cap (Allen) Bolt and Nut, 12 pieces. Note that product images are for reference and dimensions may vary slightly between plus or minus 0.2 to 0.5 percent.

Quick specs

Size (mm)
M4 X 40
Material
Mild Steel
Quantity
12
Bolt Head Diameter (mm)
6.9
Bolt Body Diameter (mm)
4
Length of Bolt
40 mm
See all specifications