Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-core ESP32-S3 development board with 16MB flash and 8MB PSRAM, Wi-Fi and Bluetooth 5 LE, and USB Type-C programming. The generous PSRAM is what makes it practical for camera, audio and data-heavy IoT projects.

Key Highlights

  • Dual-core Xtensa LX7 processor clocked up to 240 MHz
  • 16MB flash plus 8MB PSRAM for memory-hungry firmware
  • Wi-Fi 802.11 b/g/n and Bluetooth 5 LE onboard
  • USB Type-C for power, programming and debugging
  • GPIO, UART, SPI, I2C, ADC, PWM and USB OTG interfaces
  • Works with ESP-IDF, Arduino, MicroPython and PlatformIO

Ideal For

  • IoT developers building connected sensor nodes
  • Students learning Arduino, ESP-IDF or MicroPython
  • Makers prototyping audio, camera or data-logging projects
  • Engineers needing extra PSRAM for buffered workloads
  • Hobbyists adding Wi-Fi and Bluetooth LE to a build

Buying Tip

Confirm your project's power supply stays within the 3.0V–3.6V range and budget for a USB Type-C cable, since only the board is included.

Elecvora expert review

Our verdict

A well-balanced ESP32-S3 board where the 16MB flash and 8MB PSRAM combination is the real draw, giving headroom that cheaper variants lack. It is a sensible step up for anyone whose projects have outgrown basic modules.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 8MB PSRAM supports buffered and data-heavy workloads
  • Dual-core LX7 at up to 240 MHz handles multitasking well
  • USB Type-C simplifies programming and debugging
  • Broad toolchain support across four environments

Cons

  • Only the board is included, so a USB Type-C cable is needed separately
  • Requires a supply kept within the 3.0V–3.6V range
  • No enclosure or headers mentioned in the package contents

Best for

Developers who need extra PSRAM for connected, data-heavy IoT builds

Not ideal for

Beginners wanting a complete kit with cable and accessories included

Specifications

ProcessorDual-core Xtensa LX7 up to 240 MHz
Memory Capacity16MB Flash + 8MB PSRAM
ConnectivityWi-Fi 802.11 b/g/n, Bluetooth 5 LE
Operating Voltage (V)3.0V – 3.6V (3.3V typical)
Model No. / NameESP32-S3 WROOM-1 N16R8
InterfaceGPIO, UART, SPI, I2C, ADC, PWM, USB OTG
Supported SoftwareESP-IDF, Arduino, MicroPython, PlatformIO
Length (mm)55
Width (mm)28
Weight (g)15
Shipping Weight0.05 kg
Shipping Dimensions10 × 7 × 3 cm

What's in the box

  • 1 x ESP32 S3 Devkit (ESP32 S3 WROOM 1 N16R8, 16MB Flash + 8MB PSRAM)

Frequently Asked Questions

What makes the N16R8 variant different?
The N16R8 designation refers to 16MB of flash and 8MB of PSRAM on the ESP32-S3 WROOM-1 module. The extra PSRAM is the main advantage for projects that buffer images, audio or large data sets.
Which software can I use?
The board is supported by ESP-IDF, Arduino, MicroPython and PlatformIO. Install the ESP32-S3 board package for whichever environment you prefer.
What power supply does it need?
It operates from 3.0V to 3.6V, with 3.3V as the typical value. Check your supply and peripheral voltages before connecting anything.
How do I connect it to my computer?
Use the USB Type-C port, which handles power, programming and debugging. You will need your own USB Type-C cable, as only the board is included.
What interfaces are available for peripherals?
The board exposes GPIO, UART, SPI, I2C, ADC, PWM and USB OTG. Match your sensors and modules to these interfaces when planning a build.
What is included in the package?
The package contains one ESP32 S3 Devkit with the ESP32-S3 WROOM-1 N16R8 module, 16MB flash and 8MB PSRAM. No cable or accessories are listed.

Overview

The EdgeHax ESP32-S3 DevKit is a small, breadboard-friendly board built on the ESP32-S3 WROOM-1 N16R8 module. It combines a dual-core Xtensa LX7 processor running at up to 240 MHz with 16MB of flash storage and 8MB of PSRAM, giving your firmware room for larger sketches, buffered sensor data and asset-heavy applications.

Wireless connectivity is handled by Wi-Fi 802.11 b/g/n and Bluetooth 5 LE, so the board can act as a connected node, a local access point or a Bluetooth peripheral. A USB Type-C port covers power, programming and debugging, and the board operates from a 3.0V to 3.6V supply with 3.3V as the typical figure.

Key Features

  • Dual-core Xtensa LX7 at up to 240 MHz for responsive multitasking.
  • 16MB flash and 8MB PSRAM to hold larger programs and working data.
  • Wi-Fi and Bluetooth 5 LE for connected and low-energy projects.
  • USB Type-C interface for straightforward flashing and serial output.
  • Broad interface set including GPIO, UART, SPI, I2C, ADC, PWM and USB OTG.
  • Multi-toolchain support across ESP-IDF, Arduino, MicroPython and PlatformIO.

Specifications Explained

Processor and memory

The two LX7 cores at up to 240 MHz let you split work between tasks, for example handling a sensor loop on one core while a network service runs on the other. The 8MB of PSRAM is the standout figure here: it gives you working space for image frames, audio buffers, JSON payloads or logging queues that would otherwise exhaust internal RAM. The 16MB of flash leaves room for larger firmware images and stored assets.

Connectivity

Wi-Fi 802.11 b/g/n covers standard 2.4 GHz networking for dashboards, MQTT brokers and web interfaces. Bluetooth 5 LE is useful for low-power peripherals, phone-paired configuration and beacon-style setups.

Power and physical size

The board expects 3.0V to 3.6V, with 3.3V typical, so check your supply before connecting peripherals. At 55 mm long, 28 mm wide and 15 g, it fits neatly on a breadboard or inside a compact enclosure.

Compatibility and Requirements

The board is supported by ESP-IDF, Arduino, MicroPython and PlatformIO. You will need a USB Type-C cable and a host computer to program it, plus a regulated 3.3V-appropriate power source for standalone operation. Peripherals should be chosen to match the exposed GPIO, UART, SPI, I2C, ADC, PWM and USB OTG interfaces.

Typical Uses

  • Connected sensor nodes and home automation controllers
  • Data logging projects that benefit from the extra PSRAM
  • Audio and image buffering experiments on a small board
  • Teaching and prototyping across Arduino and MicroPython
  • Bluetooth LE peripherals and Wi-Fi web interfaces

What's in the Box

1 x ESP32 S3 Devkit (ESP32 S3 WROOM 1 N16R8, 16MB Flash + 8MB PSRAM).

Quick specs

Processor
Dual-core Xtensa LX7 up to 240 MHz
Memory Capacity
16MB Flash + 8MB PSRAM
Connectivity
Wi-Fi 802.11 b/g/n, Bluetooth 5 LE
Operating Voltage (V)
3.0V – 3.6V (3.3V typical)
Model No. / Name
ESP32-S3 WROOM-1 N16R8
Interface
GPIO, UART, SPI, I2C, ADC, PWM, USB OTG
See all specifications