
1 / 3 · Click to enlarge
AI Summary
A single development board that combines an ESP32 microcontroller with an 868 MHz RFM95W LoRa transceiver for long-range, low-power data links. It also offers Wi-Fi and Bluetooth, so one board can act as a LoRa node or gateway.
Key Highlights
- ESP32 microcontroller with integrated RFM95W-868S2R LoRa transceiver
- LoRa, Wi-Fi and Bluetooth connectivity on one board
- Communication distance up to 2 km line of sight
- 15+ digital and analog I/O pins for multi-sensor builds
- Works with Arduino IDE, MicroPython, ESP-IDF and PlatformIO
- Compact 70 x 58 mm board weighing about 20 g
Ideal For
- IoT developers building long-range sensor networks
- Makers prototyping smart metering or remote monitoring
- Engineering students learning LoRa and ESP32 together
- System integrators deploying LoRa nodes and gateways
- Field teams testing asset tracking or environmental sensing
Buying Tip
Confirm that 868 MHz operation is allowed where you plan to deploy, and check antenna and power supply needs before ordering.
Elecvora expert review
Our verdict
This board removes the fiddly step of pairing a LoRa radio with a controller, giving you ESP32 processing, Wi-Fi, Bluetooth and 868 MHz LoRa in one compact unit. It is a sensible starting point for node or gateway prototypes, provided you plan around the line-of-sight range figure and confirm local frequency rules.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- ESP32 and LoRa transceiver already integrated on one board
- Wi-Fi and Bluetooth add local and internet connectivity
- Wide toolchain support including Arduino IDE and MicroPython
- 15+ I/O pins allow several sensors at once
- Compact 70 x 58 mm footprint at about 20 g
Cons
- Range of up to 2 km depends on clear line of sight
- 868 MHz use must be checked against local regulations
- Power adapter or USB cable is not listed in the box contents
Best for
Makers and engineers prototyping long-range IoT nodes and gateways
Not ideal for
Users who need a plug-and-play consumer device with no programming
Specifications
| Microcontroller | ESP32 |
|---|---|
| Connectivity | LoRa, Wi-Fi, Bluetooth |
| Item Type | Transceiver Module. |
| Length (mm) | 70 |
| Weight (g) | 20 |
| Communication Distance(m) | Up to 2 km (LOS) |
| Width (mm) | 58 |
| Frequency Band | 868 MHz |
| Supported | Arduino IDE, MicroPython, ESP-IDF, PlatformIO |
| Power Supply Voltage (V) | 9V DC adapter or USB Type-C |
| Board Type | LoRa + ESP32 Development Board |
| I/O pins | 15+ digital and analog pins |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 7 × 6 × 2 cm |
What's in the box
- 1 x LoRa Module RFM95W 868MHz Transceiver with ESP32
Frequently Asked Questions
What makes this board different from a plain ESP32 board?
Can I use it as a gateway as well as a node?
How is the board powered?
Which programming environments are supported?
What is included with the product?
What range should I expect?
Overview
The EdgeHax RFM95W-868S2R is a development board built around two parts working together: an ESP32 microcontroller and an 868 MHz LoRa transceiver. Instead of wiring a radio module to a separate controller, you get both on one 70 x 58 mm PCB, which shortens assembly and reduces the number of connections that can fail.
The ESP32 brings Wi-Fi and Bluetooth to the design, while the LoRa radio handles long-range, low-bandwidth links. That combination lets a single board gather readings from sensors, transmit them over LoRa, and also connect to a local network or the internet.
Key Features
- ESP32 microcontroller with LoRa, Wi-Fi and Bluetooth connectivity
- RFM95W-868S2R transceiver operating in the 868 MHz band
- Communication distance up to 2 km line of sight
- 15+ digital and analog I/O pins
- Toolchain support for Arduino IDE, MicroPython, ESP-IDF and PlatformIO
- Powered by a 9V DC adapter or USB Type-C
Specifications Explained
868 MHz frequency band
The radio works in the 868 MHz band, so check that this frequency is permitted for your intended use in your country before deploying a network.
Up to 2 km line of sight
The stated range of up to 2 km assumes a clear line of sight between units. Walls, terrain and antenna placement will shorten real-world distance, so plan a site test before committing to a layout.
15+ I/O pins
More than fifteen digital and analog pins let you attach several sensors to one board, which is useful for monitoring projects that read temperature, level, motion or similar values together.
Power input
The board accepts a 9V DC adapter or USB Type-C. Confirm your chosen supply matches these inputs before powering the board.
Compatibility and Requirements
Code can be written and uploaded using Arduino IDE, MicroPython, ESP-IDF or PlatformIO. You will need a suitable 9V DC adapter or USB Type-C power source, and a computer with one of those toolchains installed to program the board.
Typical Uses
- Smart metering and utility data collection
- Industrial automation and remote monitoring
- Asset tracking across a site
- Water level and environmental sensing
- Smart city and campus sensor networks
Because the ESP32 provides internet connectivity, the board can serve as a LoRa node that reports data onward, or as a gateway that receives LoRa traffic and passes it to a network.
What's in the Box
1 x LoRa Module RFM95W 868MHz Transceiver with ESP32.
Quick specs
- Microcontroller
- ESP32
- Connectivity
- LoRa, Wi-Fi, Bluetooth
- Item Type
- Transceiver Module.
- Length (mm)
- 70
- Weight (g)
- 20
- Communication Distance(m)
- Up to 2 km (LOS)
















