
1 / 4 · Click to enlarge
At a glance
Made by EdgeHax, this drone gps gnss modules and antennas is a good fit for makers, students and electronics hobbyists. Main specs: accuracy Up to 10 feet; compatibility PC, Laptop, Raspberry Pi, embedded systems; output NMEA strings over USB/UART.
Key Highlights
- Accuracy: Up to 10 feet
- Compatibility: PC, Laptop, Raspberry Pi, embedded systems
- Output: NMEA strings over USB/UART
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Accuracy | Up to 10 feet |
|---|---|
| Compatibility | PC, Laptop, Raspberry Pi, embedded systems |
| Output | NMEA strings over USB/UART |
| Form factor | 41 mm × 41 mm |
| Output Interface | USB (Type-A), UART (test pads) |
| Satellite Systems Supported | NavIC, GPS, GLONASS, BeiDou |
| Module Type | NavIC GPS Tracker |
| Frequency Band | L1 + L5 |
| Shipping Weight | 0.051 kg |
| Shipping Dimensions | 14 × 10 × 10 cm |
Overview
The NavIC GPS Tracker with Onboard Patch Antenna L1 + L5, made by EdgeHax, is listed in our drone gps gnss modules and antennas range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Accuracy: Up to 10 feet
- Compatibility: PC, Laptop, Raspberry Pi, embedded systems
- Output: NMEA strings over USB/UART
- Form factor: 41 mm × 41 mm
- Output Interface: USB (Type-A), UART (test pads) (confirm your cable or board uses the same connector)
- Satellite Systems Supported: NavIC, GPS, GLONASS, BeiDou (confirm your cable or board uses the same connector)
- Module Type: NavIC GPS Tracker
- Frequency Band: L1 + L5 (make sure the rest of your system works at this frequency)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Supports NavIC, GPS, GLONASS, and BeiDou satellite systems
- High positioning accuracy within 10 feet
- Fast signal lock within 60 seconds (open sky)
- USB serial output and UART via test pads
- Compact design with built-in antenna
Package Includes:
1 x NavIC GPS Tracker with Onboard Patch Antenna L1 + L5Quick specs
- Accuracy
- Up to 10 feet
- Compatibility
- PC, Laptop, Raspberry Pi, embedded systems
- Output
- NMEA strings over USB/UART
- Form factor
- 41 mm × 41 mm
- Output Interface
- USB (Type-A), UART (test pads)
- Satellite Systems Supported
- NavIC, GPS, GLONASS, BeiDou
















