Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact black plastic bracket that fixes height and rear obstacle avoidance radar securely to an agricultural drone airframe. It is lightweight, rust-resistant and quick to install or remove for servicing.

Key Highlights

  • Black high-strength plastic bracket for agricultural drone radar mounting
  • Holds height and rear obstacle avoidance radar in a fixed position
  • Compact footprint of approximately 90 x 86 x 9 mm
  • Lightweight at roughly 0.036 kg shipping weight
  • Rust-resistant material suited to repeated field use
  • Simple to install and remove for maintenance or replacement

Ideal For

  • Agricultural drone operators maintaining spray platforms
  • Drone repair technicians replacing damaged radar mounts
  • Drone builders assembling agricultural airframes
  • Field service teams keeping spare brackets on hand
  • Operators fitting height or rear obstacle avoidance radar

Buying Tip

Measure your existing radar mount and compare it with the approximate 90 x 86 x 9 mm footprint before ordering, since specific drone models are not listed.

Elecvora expert review

Our verdict

A simple, well-focused spare part that does one job: holding agricultural drone radar firmly in place. Its plastic build keeps it light and rust-free, though buyers must confirm fit themselves because no model list is provided.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at about 0.036 kg shipping weight
  • Rust-resistant plastic suits damp field conditions
  • Compact 90 x 86 x 9 mm footprint
  • Quick to install and remove for servicing

Cons

  • No specific drone or radar model compatibility listed
  • Fasteners and fixings are not stated as included
  • Plastic may be less stiff than metal under heavy loads

Best for

Agricultural drone owners replacing or fitting a height or rear radar mount

Not ideal for

Pilots needing a metal bracket or a model-specific guaranteed fit

Specifications

ColorBlack
MaterialPlastic
Usage TypeAgricultural Drone
Dimensions (L x W x H) mm90x86x9mm(Approx.)
Shipping Weight0.036 kg
Shipping Dimensions17 × 12 × 2 cm

What's in the box

  • 1 x EFT Agricultural Drone Height & Rear Obstacle Avoidance Radar Mount

Frequently Asked Questions

What is this mount used for?
It holds the height and rear obstacle avoidance radar in position on an agricultural drone airframe. It is intended as a mounting bracket, not as a radar unit itself.
Which drones does it fit?
The product data does not list specific drone models. Check the approximate 90 x 86 x 9 mm dimensions against your airframe and existing mount before buying.
Does it need power or wiring?
No. It is a passive plastic bracket with no electrical connection, so it requires no power or wiring of its own.
Are screws included?
The package contents list only the mount, and fasteners are not stated as included. Source fixings separately for your airframe.
Will it rust?
No. It is made from plastic, which does not rust, making it suitable for damp field conditions and regular cleaning.
How should I care for it?
Clean it after field use and check for cracks or loose fasteners during routine maintenance. Replace it if the bracket is damaged.

Overview

The EFT Agricultural Drone Height & Rear Obstacle Avoidance Radar Mount is a dedicated bracket for positioning radar sensing hardware on an agricultural drone. It provides a fixed mounting point for the height and rear obstacle avoidance radar, helping keep the sensor aligned where the airframe design intends it to sit. The part is made from high-strength plastic in a black finish and measures approximately 90 x 86 x 9 mm.

Because it weighs very little and resists rust, it suits spray drones that operate in damp fields and are cleaned and serviced regularly. Installation is simple, so replacing a damaged mount or fitting a radar unit does not require a long workshop session.

Key Features

  • Purpose-built fit: shaped for the height and rear obstacle avoidance radar positions on agricultural drone frames.
  • High-strength plastic: a durable, rust-resistant material that copes with outdoor working conditions.
  • Fixed, firm mounting: keeps the radar unit steady rather than loose or improvised.
  • Lightweight: shipping weight is about 0.036 kg, so it has minimal effect on payload or balance.
  • Quick installation: can be fitted and removed in seconds for servicing.

Specifications Explained

The approximate dimensions of 90 x 86 x 9 mm describe a slim, plate-like bracket. The 9 mm height keeps the radar close to the mounting surface, while the 90 x 86 mm face gives enough area for a stable attachment. Buyers should compare these figures with their existing mount to confirm the footprint matches.

The material is plastic rather than metal, which is why the part does not rust and stays light. Shipping weight of 0.036 kg and shipping dimensions of 17 x 12 x 2 cm reflect a small, easy-to-store component that is simple to keep as a spare.

Compatibility and Requirements

This mount is intended for agricultural drone use and for the height and rear obstacle avoidance radar positions. No specific drone models, radar units or fastener sizes are stated in the product data, so confirm fit against your airframe and radar hardware before ordering. Fixings are not listed as included.

Typical Uses

  • Replacing a cracked or worn radar mount on a spray drone
  • Fitting height or rear obstacle avoidance radar during a build
  • Keeping a spare bracket in the field service kit
  • Servicing radar units that need periodic removal and refitting

What's in the Box

1 x EFT Agricultural Drone Height & Rear Obstacle Avoidance Radar Mount.

Quick specs

Color
Black
Material
Plastic
Usage Type
Agricultural Drone
Dimensions (L x W x H) mm
90x86x9mm(Approx.)
Shipping Weight
0.036 kg
Shipping Dimensions
17 × 12 × 2 cm
See all specifications