
1 / 3 · Click to enlarge
AI Summary
A single 380 mm EFT carbon tube arm for E416P and E616P frames, sized 35 mm outside and 32 mm inside. It restores a damaged arm section so you can rebuild the frame without replacing the whole airframe.
Key Highlights
- Single replacement arm tube for EFT E416P and E616P frames
- 380 mm length with 35 mm outer and 32 mm inner diameter
- Composite carbon construction for a stiff but lightweight arm
- One-piece design keeps the arm assembly simple to rebuild
- Sized to the original arm profile for a direct fit
- Shipping weight of 0.135 kg and compact 39 × 5 × 4 cm pack
Ideal For
- Pilots repairing an EFT E416P or E616P after a hard landing
- Drone builders assembling an E416P or E616P airframe
- Commercial operators keeping spare arms for mapping and inspection work
- Hobbyists maintaining a heavy-lift multirotor fleet
- Anyone replacing a bent or cracked carbon arm section
Buying Tip
Measure the length and both diameters of the arm you are replacing and compare them with 380 mm, 35 mm and 32 mm before ordering, since this tube fits only the E416P and E616P.
Elecvora expert review
Our verdict
A sensible, no-fuss replacement part: it matches the E416P and E616P arm dimensions and saves you from buying a whole new frame after one bad landing. The catch is that it is a bare tube, so you reuse your existing mounts and hardware.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Correct 380 mm length for the E416P and E616P arm layout
- 35 mm outer and 32 mm inner diameter match the original profile
- Composite carbon keeps the arm light without losing stiffness
- Single-piece purchase lets you buy only the arms you need
Cons
- Clamps, mounts and fasteners are not included
- Fits only the E416P and E616P, not other frames
- Stated dimensions and weight can vary by about ±5%
Best for
Owners of EFT E416P or E616P multirotors who need to replace or stock a spare arm tube
Not ideal for
Builders of other frame platforms or anyone needing a complete arm assembly with mounts
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Carbon Tube |
| Length (mm) | 380 |
| Inner Diameter (mm) | 32 |
| Outer Diameter (mm) | 35 |
| Compatibility | E416P, E616P |
| Shipping Weight | 0.135 kg |
| Shipping Dimensions | 39 × 5 × 4 cm |
What's in the box
- 1 × EFT Arm Carbon Tube φ35 × 32 × 380 for E416P / E616P
Frequently Asked Questions
Which drone frames does this carbon tube fit?
What are the exact dimensions?
How many tubes are included?
Does it come with the motor mount or frame clamps?
Can I use it on a different brand of frame?
How should I look after the tube?
Overview
The EFT Arm Carbon Tube is a one-piece replacement arm section for multirotor frames in the E416P and E616P families. Frame arms are structural: they carry the motor, absorb landing loads and define where the props sit relative to the body. A bent, cracked or delaminated tube can introduce vibration and drift, so replacing the affected section is the cleanest way to bring an airframe back into service.
This tube is 380 mm long with a 35 mm outer diameter and a 32 mm inner diameter. Those figures matter because the arm has to seat correctly in the frame's mounting clamps and motor mount. It is sold as a single piece, so you can order exactly the number of arms you need for a repair.
Key Features
- Composite carbon tube built for stiffness at low weight
- 380 mm length matching the E416P and E616P arm layout
- 35 mm outer diameter and 32 mm inner diameter
- Black finish that suits the standard frame look
- Simple one-piece replacement for a damaged arm section
Specifications Explained
Length (380 mm): this is the span of the tube itself. Check it against the arm you are removing before ordering, since arm length affects where the motor sits and how the frame balances.
Outer diameter (35 mm): the outside surface that clamps into the frame body and motor mount. A correct match here is what keeps the arm from rotating or slipping under load.
Inner diameter (32 mm): the bore of the tube. It sets the wall thickness and therefore how stiff the arm feels in flight, and it may also matter if you route wiring inside the arm.
Material: composite construction, listed as carbon, chosen for a strong stiffness-to-weight ratio.
Compatibility and Requirements
This tube is listed for the EFT E416P and E616P only. It is not a universal part, so confirm your frame model and your existing arm dimensions before purchase. Installation requires the frame's original clamps, mounts and fasteners; those are not included. Because the arm is structural, work should be done with the correct tools and the mounting hardware torqued as specified by the frame manufacturer.
Typical Uses
Most buyers use this as a repair part after a hard landing, a tip-over or transport damage. It is also relevant for builders assembling or refreshing an E416P or E616P airframe who want a spare arm on the bench before a job. Keeping one spare tube means a damaged arm does not automatically end a flight day.
What's in the Box
- 1 × EFT Arm Carbon Tube φ35 × 32 × 380 for E416P / E616P
Note that dimensions and weight may vary by approximately ±5%.
Quick specs
- Item Type
- Accessory
- Model No. / Name
- Carbon Tube
- Length (mm)
- 380
- Inner Diameter (mm)
- 32
- Outer Diameter (mm)
- 35
- Compatibility
- E416P, E616P


















