
1 / 3 · Click to enlarge
AI Summary
A single EFT carbon tube arm for the E610P frame, 330 mm long with a 30 mm outer and 27 mm inner diameter. It restores structural rigidity to the airframe using a lightweight 120 g carbon part.
Key Highlights
- 330 mm carbon tube sized for the E610P airframe
- 30 mm outer diameter with 27 mm inner diameter
- Approximately 120 g per tube keeps the frame light
- Rigid carbon construction supports arm stability
- Sold as one piece for targeted replacement
- Compact 35 × 4 × 5 cm shipping dimensions
Ideal For
- E610P owners repairing a damaged arm
- Drone builders maintaining a spare structural part
- Pilots rebuilding a frame after a hard landing
- Hobbyists keeping common spares on the bench
Buying Tip
Count how many arms you need and confirm the 30 mm outer and 27 mm inner diameters against your current tube, since this listing is for one piece only.
Elecvora expert review
Our verdict
A straightforward replacement part for E610P owners: the dimensions are clearly stated and the carbon tube keeps the arm light. It is a structural component only, so budget for the hardware you already need to reuse.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 330 mm length and 30/27 mm diameters
- Light at around 120 g per tube
- Carbon construction for arm rigidity
- Single-piece listing suits targeted repairs
Cons
- Sold as one piece only
- No mounts or fasteners included
- Dimensions and weight carry a ±5% tolerance
Best for
E610P frame owners replacing a single damaged arm tube
Not ideal for
Builders needing a complete arm assembly with hardware
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Carbon Tube |
| Length (mm) | 330 |
| Compatibility | E610P |
| Inner Diameter (mm) | 27 |
| Outer Diameter (mm) | 30 |
| Weight (g) | 120 |
| Shipping Weight | 0.125 kg |
| Shipping Dimensions | 35 × 4 × 5 cm |
What's in the box
- 1 x EFT Arm Carbon Tube φ30×27×330 compatible with E610P
Frequently Asked Questions
What is included with this product?
Will it fit my drone frame?
How much does the tube weigh?
Can I use it on a different frame?
Does it come with mounting hardware?
How should I care for a carbon tube arm?
Overview
The EFT Arm Carbon Tube is a structural component for the E610P drone frame, supplied as a single tube. It measures 330 mm in length, with a 30 mm outer diameter and a 27 mm inner diameter, and weighs around 120 g. In a multirotor airframe, the arms carry the motors and transmit vibration and load into the central body, so their stiffness and fit have a direct effect on how the aircraft behaves in the air.
This tube is intended for pilots and builders who already run an E610P frame and need to replace a damaged arm or keep a spare part on hand. Carbon construction keeps weight low while providing the rigidity expected of an arm section, which helps the frame stay composed during flight.
Key Features
- Single carbon tube made for the E610P frame
- 330 mm length matches the intended arm position
- 30 mm outer and 27 mm inner diameter for a defined wall section
- Approximately 120 g per tube
- Black finish
- Packed dimensions of 35 × 4 × 5 cm for storage and shipping
Specifications Explained
Length: 330 mm defines how far the arm extends from the frame body, so it must match the original part to keep motor spacing and propeller clearance consistent.
Diameters: the 30 mm outer diameter sets how the tube seats into the frame mounts, while the 27 mm inner diameter describes the bore. Check both figures against your existing arm or mount before ordering.
Weight: at roughly 120 g, the tube adds little mass at the arm, which helps keep the overall build light. EFT notes a ±5% tolerance on dimensions and weight, so small variations are normal.
Compatibility and Requirements
This tube is listed as compatible with the E610P. It is a structural part only; motors, mounts, fasteners and other frame hardware are not included and must already be available from your existing build or sourced separately. Installation requires the arm to be fitted correctly, since the arm assembly affects overall performance and stability.
Typical Uses
- Replacing a bent or cracked arm tube on an E610P frame
- Keeping a spare structural part for field repairs
- Rebuilding an airframe after a hard landing
- Refreshing a worn frame during routine maintenance
What's in the Box
One EFT Arm Carbon Tube φ30×27×330 compatible with the E610P.
Quick specs
- Item Type
- Accessory
- Model No. / Name
- Carbon Tube
- Length (mm)
- 330
- Compatibility
- E610P
- Inner Diameter (mm)
- 27
- Outer Diameter (mm)
- 30


















