Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ELECROW, this temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Temperature and Humidity Sensor; rated voltage (vdc) 3.3 to 5. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Temperature and Humidity Sensor
  • Rated Voltage (VDC): 3.3 to 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameTemperature and Humidity Sensor
Rated Voltage (VDC)3.3 to 5
Measurement RangeHumidity: 20% - 90% RH; Temperature: 0 ~ 50 °C
Output Delay2S
AccuracyHumidity: ±5% RH; Temperature: ±2°C
Dimensions (L x W x H) mm40.0(L)x20.0(W)x7.6(H)
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.03 kg
Shipping Dimensions10 × 6 × 2 cm

Overview

The ELECTROW Crowtail- Temperature& Humidity Sensor 2.0, made by ELECROW, is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Temperature and Humidity Sensor
  • Rated Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Measurement Range: Humidity: 20% - 90% RH; Temperature: 0 ~ 50 °C (quoted range is usually line-of-sight; walls and interference shorten it)
  • Output Delay: 2S
  • Accuracy: Humidity: ±5% RH; Temperature: ±2°C
  • Dimensions (L x W x H) mm: 40.0(L)x20.0(W)x7.6(H) (measure your mounting space before ordering)
  • Bluetooth Version: Supports Bluetooth 5.1 dual mode function (check your phone or controller supports the same Bluetooth version for full range)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This module can help you detect the temperature and humidity of the environment of your house.
The module contains a DHT11 temperature & humidity sensor that is a complex sensor with a calibrated digital signal out. It uses digital module acquisition technology and the temperature&humidity sensor technology. The sensor consists of a resistance-type moisture element and an NTC temperature measuring element. Because of the single-wire serial interface, it is easy to use the module.

Features:

  1. High Accuracy
  2. Low Power Consumption
  3. Crowtail Interface
  4. Compact and Durable Design
  5. Wide Operating Range
  6. Temperature Sensing
  7. Humidity Sensing

Package Includes:

1 x ELECTROW Crowtail- Temperature& Humidity Sensor 2.0

Quick specs

Item Type
Sensor
Model No. / Name
Temperature and Humidity Sensor
Rated Voltage (VDC)
3.3 to 5
Measurement Range
Humidity: 20% - 90% RH; Temperature: 0 ~ 50 °C
Output Delay
2S
Accuracy
Humidity: ±5% RH; Temperature: ±2°C
See all specifications