Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Espressif, this espressif dev. boards and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Espressif ESP32-S3-DevKitC-1-N8R8; processor ESP32-S3-WROOM-1-N8R8; flash memory (mb) 8.

Key Highlights

  • Model No. / Name: Espressif ESP32-S3-DevKitC-1-N8R8
  • Processor: ESP32-S3-WROOM-1-N8R8
  • Flash Memory (MB): 8

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameEspressif ESP32-S3-DevKitC-1-N8R8
ProcessorESP32-S3-WROOM-1-N8R8
Flash Memory (MB)8
PSRAM8 MB
ConnectivityWi-Fi and Bluetooth BLE
InterfaceGPIO, I2C, SPI, UART
Shipping Weight0.05 kg
Shipping Dimensions10 × 6 × 3 cm

Overview

The Espressif ESP32-S3-DevKitC-1-N8R8 Development Board, made by Espressif, is listed in our espressif dev. boards and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Espressif ESP32-S3-DevKitC-1-N8R8
  • Processor: ESP32-S3-WROOM-1-N8R8 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Flash Memory (MB): 8 (more memory leaves room for larger programs and buffers)
  • PSRAM: 8 MB
  • Connectivity: Wi-Fi and Bluetooth BLE (check your phone or controller supports the same Bluetooth version for full range)
  • Interface: GPIO, I2C, SPI, UART (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 6 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Espressif ESP32-S3-DevKitC-1-N8R8 is a compact, feature-rich development board powered by the ESP32-S3 SoC. It features a dual-core Xtensa LX7 processor, built-in Wi-Fi and Bluetooth 5 (LE) connectivity, and 8MB of PSRAM along with 8MB of Flash storage.This board is designed for AIoT and embedded applications, offering enhanced computing power, a wide range of peripheral interfaces, and low-power operation. It includes a  Micro B port for power and programming, support for multiple GPIOs, SPI, I2C, I2S, PWM, ADC, and UART interfaces. The onboard JTAG interface makes debugging easier, and it supports deep sleep and power-saving modes.Ideal for IoT, smart home, AI acceleration, and edge computing applications, the ESP32-S3-DevKitC-1-N8R8 provides developers with a versatile platform for rapid prototyping and development.

Features:

  1. Wi-Fi 6 (802.11ax) for high-speed, reliable wireless communication.
  2. Bluetooth 5.0 LE for low-power, short-range connectivity.
  3. Supports Zigbee and Thread (IEEE 802.15.4) for multiprotocol applications.
  4. GPIO, SPI, I2C, UART, PWM, ADC, DAC pins exposed for easy interfacing.
  5. Multiple low-power modes for energy-efficient operation in battery-powered devices.
  6. USB-to-UART bridge for simple programming and debugging.

Package Includes:

1 x Espressif ESP32-S3-DevKitC-1-N8R8 Dev Board

Quick specs

Model No. / Name
Espressif ESP32-S3-DevKitC-1-N8R8
Processor
ESP32-S3-WROOM-1-N8R8
Flash Memory (MB)
8
PSRAM
8 MB
Connectivity
Wi-Fi and Bluetooth BLE
Interface
GPIO, I2C, SPI, UART
See all specifications