
1 / 2 · Click to enlarge
At a glance
Made by Espressif, this espressif dev. boards and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name ESP32-S3-WROOM-1; processor Dual-core Xtensa® 32-bit LX7 CPU (up to 240 MHz); microphone array 3.
Key Highlights
- Model No. / Name: ESP32-S3-WROOM-1
- Processor: Dual-core Xtensa® 32-bit LX7 CPU (up to 240 MHz)
- Microphone Array: 3
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | ESP32-S3-WROOM-1 |
|---|---|
| Processor | Dual-core Xtensa® 32-bit LX7 CPU (up to 240 MHz) |
| Microphone Array | 3 |
| Flash Memory (MB) | 16 |
| PSRAM | 16 MB |
| Connectivity | Wi-Fi and Bluetooth BLE |
| Interface | I2C, SPI, and UART |
| Shipping Weight | 0.29 kg |
| Shipping Dimensions | 17 × 16 × 6 cm |
Overview
The Espressif ESP32-S3-LCD-EV-Board Development Board, made by Espressif, is listed in our espressif dev. boards and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: ESP32-S3-WROOM-1
- Processor: Dual-core Xtensa® 32-bit LX7 CPU (up to 240 MHz) (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Microphone Array: 3
- Flash Memory (MB): 16 (more memory leaves room for larger programs and buffers)
- PSRAM: 16 MB
- Connectivity: Wi-Fi and Bluetooth BLE (check your phone or controller supports the same Bluetooth version for full range)
- Interface: I2C, SPI, and UART (confirm your cable or board uses the same connector)
- Shipping Weight: 0.29 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Espressif ESP32-S3-LCD-EV-Board is a development board based on the ESP32-S3, which is a powerful microcontroller from Espressif Systems. The board is designed for developers looking to create applications that require not only Wi-Fi and Bluetooth connectivity but also a graphical interface through an integrated LCD screen.
Features:
Quick specs
- Model No. / Name
- ESP32-S3-WROOM-1
- Processor
- Dual-core Xtensa® 32-bit LX7 CPU (up to 240 MHz)
- Microphone Array
- 3
- Flash Memory (MB)
- 16
- PSRAM
- 16 MB
- Connectivity
- Wi-Fi and Bluetooth BLE



















