
1 / 4 · Click to enlarge
AI Summary
eSUN PETG+ Clear 1.75mm filament offers high toughness and impact resistance for functional 3D prints. Its 300g spool provides 330m of material with strong layer adhesion and a glossy, translucent finish.
Key Highlights
- High impact resistance of 8 kJ/m² for durable parts
- Tensile strength 49 MPa and elongation at break 228%
- Prints at 230–250°C with 80°C heated bed
- Clear translucent color for light-transmitting models
- 1.75mm diameter with ±0.1mm dimensional accuracy
- 330 meters of filament on a compact 300g spool
Ideal For
- Makers printing functional mechanical parts
- RC hobbyists building custom components
- Designers creating translucent light fixtures
- Educators demonstrating tough 3D printed prototypes
- Users needing impact-resistant replacement parts
Buying Tip
Check that your printer's hotend can reach at least 230°C and your bed 80°C before buying, as PETG+ requires higher temperatures than standard PLA.
Elecvora expert review
Our verdict
eSUN PETG+ Clear offers a practical balance of toughness and printability for makers who need durable, slightly flexible parts. Its clear finish and strong layer bonding make it a reliable choice for functional and decorative prints.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High impact resistance and elongation for durable parts
- Good heat resistance compared to PLA
- Clear translucent color for light-transmitting applications
- Consistent 1.75mm diameter with tight tolerance
Cons
- Requires higher printing temperatures than PLA
- Can string without tuned retraction settings
- 300g spool is smaller than standard 1kg options
Best for
Functional parts needing impact resistance and slight flexibility
Not ideal for
High-speed printing or printers limited to 220°C max
Specifications
| Filament Diameter | 1.75 |
|---|---|
| Filament Length (m) | 330 |
| Density | 1.23 |
| Melt Flow Index | 20(250°C/2.16kg) |
| Shock Resistance (KJ/m2) | 7 |
| Dimensional Accuracy (mm) | 170 +/- 0.1 |
| Roundness Accuracy (mm) | +/- 0.5 |
| Melting Point (°C) | 220 |
| Spool Inner Dia (mm) | 55 |
| Spool Outer Dia | 200 |
| Weight (g) | 300 |
| Spool Width (mm) | 65 |
| GTIN | 6922572261013 |
| Color | Clear |
| Pressure Temperature (°C) | 240 ~ 255 |
| Tensile Strength (MPa) | 49 |
| Bending Strength (MPa) | 68 |
| Flexural Modulus | 2027 |
| Elongation at Break | 228 |
| IZOD Impact | 8 |
| Printing Temperature | 230 - 250 |
| Heat Distort. (°C,0.45MPa) | 64 |
| Heatbed Temperature | 80 |
| Shipping Weight | 1.6 kg |
| Shipping Dimensions | 22 × 22 × 8 cm |
What's in the box
- 1 x eSUN PETG+ Clear 1.75mm 3D Printing Filament Spool (300g)
Frequently Asked Questions
What printing temperature should I use for eSUN PETG+ Clear?
Does this filament require a heated bed?
Is eSUN PETG+ Clear food-safe?
How much filament is on the spool?
Can I use this filament with a Bowden extruder?
What is included in the box?
Overview
eSUN PETG+ Clear is a 1.75mm 3D printing filament that bridges the gap between easy-to-print PLA and tough ABS. Supplied on a 300g spool, it gives you 330 meters of clear, translucent material to experiment with functional and decorative prints. PETG+ is known for its strong layer adhesion and slight flexibility, making it a practical choice for parts that must withstand impact or flex without cracking.
Key Features
- Tough and impact resistant: With an IZOD impact strength of 8 kJ/m² and a shock resistance of 7 kJ/m², printed parts can absorb knocks and drops.
- Strong yet flexible: A tensile strength of 49 MPa and elongation at break of 228% mean parts bend under load rather than snapping.
- Good heat resistance: A heat distortion temperature of 64°C at 0.45 MPa allows use in warm environments where PLA would soften.
- Clear translucent finish: The clear color lets light pass through, ideal for lampshades, light guides, and see-through housings.
- Consistent diameter: Dimensional accuracy of ±0.1mm and roundness of ±0.5mm support smooth extrusion and reliable layer bonding.
Specifications Explained
The 1.75mm diameter is the most common size for modern desktop 3D printers. A density of 1.23 g/cm³ means the 300g spool yields approximately 330 meters of filament. The melt flow index of 20 g/10min (250°C/2.16kg) indicates good flow characteristics during printing. Printing temperature is listed as 230–250°C, with a recommended pressure temperature of 240–255°C, so start at 240°C and adjust for your printer. A heated bed at 80°C promotes first-layer adhesion and helps the print release as it cools. The flexural modulus of 2027 MPa and bending strength of 68 MPa describe a stiff but not brittle material. Spool dimensions are 200mm outer diameter, 55mm inner diameter, and 65mm width, fitting standard spool holders.
Compatibility and Requirements
This filament requires a 3D printer with a hotend capable of reaching at least 230°C and preferably a heated bed that can reach 80°C. It is compatible with direct-drive and Bowden extruders set up for 1.75mm filament. No special enclosure is required, but printing in a well-ventilated area is recommended. The spool's 55mm inner diameter fits common 8mm and 10mm spool holders with adapters.
Typical Uses
Use eSUN PETG+ Clear for mechanical parts such as brackets, knobs, and gears; protective covers and cases; translucent decorative items like lampshades and light diffusers; and prototypes that need to survive handling. Its impact resistance makes it suitable for drone frames, RC car parts, and tool holders.
What's in the Box
One 300g spool of eSUN PETG+ Clear 1.75mm filament. No other accessories are included.
Quick specs
- Filament Diameter
- 1.75
- Filament Length (m)
- 330
- Density
- 1.23
- Melt Flow Index
- 20(250°C/2.16kg)
- Shock Resistance (KJ/m2)
- 7
- Dimensional Accuracy (mm)
- 170 +/- 0.1














