Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1.75mm translucent green PETG filament spool with high toughness, glossy clarity and a 49 MPa tensile strength. It prints at 232-250 °C for durable, impact-resistant FDM parts.

Key Highlights

  • 1.75mm PETG filament with tight diameter tolerance for consistent extrusion
  • Translucent green colour with a smooth, high-gloss printed surface
  • Tough formulation: 49 MPa tensile strength and 225% elongation at break
  • Prints at 232-250 °C with a heated bed at 77-90 °C
  • Chemically resistant and odourless during the printing process
  • Vacuum-sealed spool with desiccant pouch to limit moisture

Ideal For

  • Makers printing functional brackets and mechanical housings
  • Designers creating translucent light-diffusing panels and covers
  • Hobbyists who want tougher prints than standard PLA allows
  • Workshops producing jigs, fixtures and protective parts
  • Users printing decorative models with a glossy semi-transparent finish

Buying Tip

Dry the spool before a long print if it has been open for a while, and start at about 240 °C nozzle and 80 °C bed, then tune from there.

Elecvora expert review

Our verdict

A solid PETG choice for makers who want tough, glossy, semi-transparent parts without exotic settings. The temperature range and mechanical values are well suited to functional FDM printing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Good balance of strength and flexibility
  • Attractive translucent green with a glossy finish
  • Odourless during printing
  • Tight diameter tolerance for consistent extrusion
  • Vacuum-sealed with desiccant

Cons

  • Requires a hotend that reaches at least 232 °C
  • Needs a heated bed for best adhesion
  • Moisture-sensitive once the seal is opened

Best for

Functional and decorative FDM parts needing toughness and translucency

Not ideal for

Printers limited to low nozzle temperatures or without a heated bed

Specifications

Filament Diameter1.75
Density1.23
Operating Temperature (°C)232 - 250
Heating Plate Temp. (°C)77 - 90
Tensile Strength (MPa)49
Elongation at Break225
Flexural Strength68
Flexural Modulus1800
Colortranslucent green
Shipping Weight1.47 kg
Shipping Dimensions22 × 20 × 8 cm

What's in the box

  • 1 x eSUN PETG+ Translucent Green - 1.75mm 3D Printing Filament Spool

Frequently Asked Questions

What nozzle temperature should I use for this PETG filament?
Print between 232 and 250 °C. Start around 240 °C and adjust within that range for your printer and print speed.
Do I need a heated bed?
A heated bed set to 77-90 °C is recommended for reliable first-layer adhesion and to reduce warping on larger parts.
Is this filament compatible with my printer?
It fits FDM printers that accept 1.75mm filament and can reach the required nozzle and bed temperatures. Check your printer's maximum temperatures first.
What is included with the spool?
The package contains one eSUN PETG+ Translucent Green 1.75mm filament spool, vacuum-sealed with a desiccant pouch.
How should I store the filament?
Keep it sealed with the desiccant pouch when not in use. PETG absorbs moisture, which can cause popping and rough surfaces during printing.
What kinds of parts is this filament good for?
Its toughness and translucency suit brackets, covers, light panels, housings and decorative models that need impact resistance.

Overview

The eSUN PETG+ Translucent Green filament brings a semi-transparent, glossy look to functional FDM printing. PETG combines the printability of PLA with better toughness, and this spool is aimed at makers who need parts that resist impact and flex rather than crack. The 1.75mm diameter and tight tolerance help keep extrusion steady, while the translucent green colour works well for covers, light panels and decorative pieces that benefit from a little light transmission.

Key Features

  • Balanced strength: 49 MPa tensile strength and 225% elongation at break give parts both rigidity and give.
  • Glossy translucent finish: printed models show a smooth surface with a high-gloss look.
  • Chemical resistance: suitable for parts exposed to everyday solvents and handling.
  • Odourless printing: no strong smell during the print process.
  • Moisture protection: vacuum-sealed packaging with a desiccant pouch.

Specifications Explained

Diameter 1.75mm: the standard size for most modern FDM printers, and the tight tolerance supports consistent flow and fewer jams.

Print temperature 232-250 °C: PETG needs a hotter nozzle than PLA. Start in the middle of the range and adjust for your printer and speed.

Heated bed 77-90 °C: a warm bed improves first-layer adhesion and helps prevent warping on larger parts.

Mechanical values: 49 MPa tensile strength, 225% elongation, 68 MPa flexural strength and 1800 MPa flexural modulus describe a material that bends before breaking, useful for clips, brackets and housings.

Density 1.23 g/cm³: a mid-range density that helps you estimate spool yield and part weight.

Compatibility and Requirements

This filament is intended for FDM 3D printers that accept 1.75mm material and can reach a nozzle temperature of at least 232 °C. A heated bed capable of 77-90 °C is recommended for reliable first layers. Check that your hotend and bed can reach these temperatures before printing.

Typical Uses

Translucent green PETG suits functional brackets, protective covers, light-diffusing panels, mechanical housings, jigs and decorative models. Its toughness makes it a sensible pick for parts that see handling, vibration or occasional impact.

What's in the Box

  • 1 x eSUN PETG+ Translucent Green 1.75mm 3D printing filament spool

Quick specs

Filament Diameter
1.75
Density
1.23
Operating Temperature (°C)
232 - 250
Heating Plate Temp. (°C)
77 - 90
Tensile Strength (MPa)
49
Elongation at Break
225
See all specifications