Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

eSUN PETG+ Orange is a 1.75mm filament combining PLA-like printability with high toughness, strong layer adhesion and a glossy finish. It is a practical choice for durable functional parts that need to bend rather than break.

Key Highlights

  • 1.75mm PETG+ filament with high toughness and strong layer adhesion
  • Glossy orange finish with low shrinkage for dimensionally stable prints
  • Extruder range 230-250°C and heatbed range 75-90°C
  • Print speeds from 40-100 mm/s with 100% fan speed
  • Low moisture uptake for reliable storage in humid conditions
  • Good chemical resistance and UV absorber for outdoor-capable parts

Ideal For

  • Makers printing functional brackets, jigs and spacers
  • Engineers prototyping mechanical parts that need toughness
  • Hobbyists wanting a glossy orange finish on display models
  • Workshops in humid climates needing low-moisture filament
  • Users moving up from PLA to a more durable material

Buying Tip

Check that your printer can reach 230-250°C at the nozzle and 75-90°C on the bed before ordering, since PETG+ needs more heat than standard PLA.

Elecvora expert review

Our verdict

eSUN PETG+ Orange is a sensible upgrade from PLA for users who need tougher, more heat-resistant parts without ABS-level difficulty. Its glossy finish, strong layer adhesion and low shrinkage make it a dependable everyday functional filament.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Tough and ductile with 83% elongation at break
  • Strong layer adhesion and low shrinkage
  • Glossy orange finish with good moisture resistance
  • Wide 40-100 mm/s print speed window

Cons

  • Requires higher nozzle and bed temperatures than PLA
  • Can blob around the nozzle if the first layer is too close
  • Not suitable for very high-temperature applications

Best for

Functional parts, brackets and prototypes needing toughness and a glossy finish

Not ideal for

Printers limited to PLA-level temperatures or very high-heat applications

Specifications

Filament Diameter1.75
Density1.27
Melt Flow Index20 (250°C/2.16kg)
Tensile Strength (MPa)52.2
Elongation at Break83
Flexural Strength58.1
Flexural Modulus1073
Extruder Temperature230-250
Heatbed Temperature75-90
Printing Speed40-100
Fan speed100
ColorOrange
Shipping Weight1.48 kg
Shipping Dimensions22 × 22 × 8 cm

What's in the box

  • 1 x eSUN PETG+ Orange 1.75mm 3D Printing Filament Spool

Frequently Asked Questions

What nozzle temperature should I use for eSUN PETG+?
Print between 230-250°C. Start around 240°C and fine-tune based on layer adhesion and surface quality.
Do I need a heated bed?
A heated bed at 75-90°C is recommended for best results, though the low-shrinkage formulation supports printing with little to no warping.
Is this filament compatible with my printer?
It fits FDM printers that accept 1.75mm filament and can reach at least 230°C at the nozzle.
What print speed and fan setting should I use?
Use a print speed of 40-100 mm/s with the part-cooling fan at 100%.
What is included in the package?
The package contains 1 x eSUN PETG+ Orange 1.75mm 3D Printing Filament Spool.
How should I store the filament?
Keep it in a dry place between prints. PETG+ has good hydrophobicity, but dry storage still helps maintain print quality.

Overview

eSUN PETG+ Orange is a 1.75mm filament designed for FDM 3D printers. PETG+ combines characteristics of PLA and ABS: it prints with relative ease, bonds strongly between layers and produces a glossy, slightly translucent orange surface. The material is tough and ductile, so parts tend to bend under load instead of shattering. Low shrinkage supports stable dimensions and reduces the risk of warping, while low moisture absorption helps the spool stay printable in humid workshops.

Key Features

  • Tough and ductile: tensile strength of 52.2 MPa with 83% elongation at break supports parts that flex rather than crack.
  • Strong layer bonding: good adhesion between layers produces solid, durable prints.
  • Glossy finish: the orange colour delivers a clean, semi-gloss surface straight off the printer.
  • Low shrinkage: helps maintain accurate dimensions and supports printing with or without a heated bed.
  • Moisture resistant: good hydrophobicity makes the filament easier to store and use in humid conditions.
  • Chemical resistance and UV absorber: useful for parts exposed to handling, weather and everyday chemicals.

Specifications Explained

Diameter 1.75mm: the standard size for most modern desktop FDM printers. Density 1.27 g/cm³ indicates a solid, substantial plastic. Melt flow index 20 (250°C/2.16kg) describes how readily the material flows when molten, which supports smooth extrusion at the recommended temperatures.

Mechanical values: tensile strength of 52.2 MPa and elongation at break of 83% show a material that is strong yet flexible. Flexural strength of 58.1 MPa and flexural modulus of 1073 MPa describe stiffness under bending, so parts hold shape while retaining some give.

Print settings: extrude between 230-250°C and set the heatbed to 75-90°C. Print speed can range from 40-100 mm/s, and running the part-cooling fan at 100% helps surface quality.

Compatibility and Requirements

This filament is intended for FDM 3D printers that accept 1.75mm material and can reach an extruder temperature of at least 230°C. A heated bed capable of 75-90°C is recommended for best adhesion, although the low-shrinkage formulation supports printing with little to no warping. A part-cooling fan is useful at 100% speed.

Typical Uses

Use eSUN PETG+ Orange for mechanical brackets, jigs, enclosures, spacers, functional prototypes and decorative models. The combination of strength, ductility and water resistance suits parts that see handling, light loads and humid environments.

What's in the Box

Package includes 1 x eSUN PETG+ Orange 1.75mm 3D Printing Filament Spool.

Quick specs

Filament Diameter
1.75
Density
1.27
Melt Flow Index
20 (250°C/2.16kg)
Tensile Strength (MPa)
52.2
Elongation at Break
83
Flexural Strength
58.1
See all specifications