
1 / 3 · Click to enlarge
AI Summary
The Grow K202 is a 12V fingerprint control board that stores up to 120 prints and works with R301T, R502 and R503 3V3 modules. It draws only 15uA on standby and switches loads through its 10A relay output.
Key Highlights
- Stores up to 120 fingerprint templates on board
- Compatible with R301T, R502-A, R502-AW, R502-F and R503 3V3
- 15uA standby current keeps idle power draw very low
- 12V operation with a relay output rated up to 10A
- Compact board suited to custom access-control builds
- Pairs with a separate fingerprint module for sensing
Ideal For
- Makers building custom fingerprint access control
- Security installers adding biometric entry to 12V systems
- Workshop and cabinet builders wanting keyless access
- Hobbyists already using Grow R502 or R503 modules
- Integrators needing a low-standby control board
Buying Tip
Confirm your fingerprint module is one of the supported models, and specifically the 3V3 version if you plan to use an R503.
Elecvora expert review
Our verdict
The K202 is a sensible building block for anyone already working with Grow fingerprint modules. Its 120-print capacity, low standby draw and 10A relay make it flexible for access projects, though it is only half a system without a module.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Stores up to 120 fingerprints
- Very low 15uA standby current
- 10A relay output handles real loads
- Supports several Grow module models
Cons
- Fingerprint module not included
- R503 must be the 3V3 version
- No enclosure or wiring accessories supplied
Best for
Makers and installers building 12V fingerprint access control
Not ideal for
Buyers wanting a complete plug-and-play lock unit
Specifications
| Item Type | Control Board |
|---|---|
| Model No. / Name | Fingerprint Control Board |
| Stand-by mode current | 15uA |
| Output Voltage | 12 |
| Compatibility | R502-A, R502-AW, R502-F, R301T, R503 (3V3 version) |
| Fingerprint Capacity | 120 |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 10 × 6 × 4 cm |
What's in the box
- 1 x K202 Fingerprint Control Board
Frequently Asked Questions
Does the K202 include a fingerprint sensor?
Which fingerprint modules work with this board?
What power supply does it need?
How many fingerprints can it store?
How much power does it use when idle?
Can I use an R503 module with it?
Overview
The Grow K202 Fingerprint Control Board is the control half of a fingerprint access system. It handles fingerprint storage and switching, while a separate Grow sensor module captures the print. The board holds up to 120 fingerprints and is designed to work with the R301T, R502-A, R502-AW, R502-F and the 3V3 version of the R503. It runs from a 12V supply and provides a relay output rated to 10A, so it can control a lock or comparable load. Standby current is only 15uA, which matters in installations that stay powered continuously.
Key Features
- 120-fingerprint capacity: enough storage for a household, small team or shared cabinet.
- Broad module support: works with five Grow sensor models plus the R503 3V3.
- Low standby draw: 15uA keeps idle consumption minimal.
- 12V operation: matches common access-control and lock supplies.
- 10A relay output: switches heavier loads than a bare logic signal could.
- Compact size: shipping dimensions of 10 x 6 x 4 cm leave room in tight enclosures.
Specifications Explained
Fingerprint capacity
With room for 120 prints, the board can serve several regular users or hold multiple prints per person. Templates are managed by the board rather than the module, so the two must be used as a pair.
Standby current
A 15uA standby figure means the board sips power when idle. That is useful for battery-backed or always-on installations where every milliamp counts.
Output voltage and relay
The board operates at 12V and its relay output is rated to a maximum of 10A. Confirm that your lock or load falls within that limit before wiring.
Compatibility and Requirements
The K202 is built for the R301T, R502-A, R502-AW, R502-F and R503 (3V3 version) fingerprint modules. Note that the R503 must be the 3V3 variant. A matching module is required for fingerprint sensing, and a 12V power source is needed to run the board. Check your module version before ordering.
Typical Uses
- Fingerprint entry on cabinets, lockers and storage units
- Custom access control for doors and gates
- DIY security projects and enclosure builds
- Adding biometric access to existing 12V systems
What's in the Box
1 x K202 Fingerprint Control Board. The fingerprint module is not included and must be supplied separately.
Quick specs
- Item Type
- Control Board
- Model No. / Name
- Fingerprint Control Board
- Stand-by mode current
- 15uA
- Output Voltage
- 12
- Compatibility
- R502-A, R502-AW, R502-F, R301T, R503 (3V3 version)
- Fingerprint Capacity
- 120



















