Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Grow, this fingerprint sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Control Board; model no. / name Fingerprint Control Board; stand-by mode current <7uA. Check that your power source supplies 05-06V before connecting it.

Key Highlights

  • Item Type: Control Board
  • Model No. / Name: Fingerprint Control Board
  • Stand-by mode current: <7uA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeControl Board
Model No. / NameFingerprint Control Board
Stand-by mode current<7uA
Output Voltage05-06V
CompatibilityR502-A, R502-AW, R502-F, R503
Shipping Weight0.05 kg
Shipping Dimensions7 × 5 × 3 cm

Overview

The GROW-KS200 Fingerprint Control Board, made by Grow, is listed in our fingerprint sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Control Board
  • Model No. / Name: Fingerprint Control Board
  • Stand-by mode current: <7uA (your supply must deliver at least this much current)
  • Output Voltage: 05-06V (match this to your power supply; too high a voltage can damage the part)
  • Compatibility: R502-A, R502-AW, R502-F, R503
  • Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The KS200 fingerprint control board supports up to 200 fingerprints and is compatible with R502-A, R502-AW, R502-F, and R503 modules. It operates on a DC 3.7-6.5V power supply, with a standby mode current of less than 7 µA and an output of DC 5-6V, 1.5A. Ideal for integration into security systems, the KS200 offers reliable and efficient fingerprint management for various applications.
1 Register Administrator Fingerprint:
Long press the SET button, and release finger when shows blue indicator light on the control board,now the fingerprint module indicator flash fast,put the same admin finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful. Fingerprint can be registered continuously and it can register 20 pieces administrator fingerprint; if no need adding fingerprint more, waiting a few seconds to exit. If the administrator is fully registered,it will automatically exit the administrator registration state after hear “DiDiDi” and will start register user fingerprint if press SET button again.
2 Register User Fingerprint:
Press the administrator fingerprint until the blue indicator light flash fast and hear the music,means can add user fingerprint. Put the same user finger with multiple times in fingerprint collection area until hearing music means fingerprint register successful.Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.
3 Delete User Fingerprint:
Press the administrator fingerprint until red indicator light flash fast and hear music,means user fingerprints are deleted.
4 Factory Setting:
Long press the SET button,until shows red indicator light on the control board and hear the music, then release the finger,means initialization operation successful.

Features:

  1. Supports multiple fingerprint modules
  2. Low power consumption in standby mode
  3. Reliable fingerprint management
  4. Easy integration with existing systems
  5. Efficient power output
  6. Ideal for security applications
  7. Can be connect with R502-A,R502-AW,R502-F,R503fingerprint modul

Package Includes:

1 x KS200 Fingerprint Control Board

Quick specs

Item Type
Control Board
Model No. / Name
Fingerprint Control Board
Stand-by mode current
&lt;7uA
Output Voltage
05-06V
Compatibility
R502-A, R502-AW, R502-F, R503
Shipping Weight
0.05 kg
See all specifications