
1 / 5 · Click to enlarge
AI Summary
A compact 3.3V fingerprint module with an RS232 TTL interface, 508 DPI sensor and room for 200 stored fingerprints. It handles dry, wet and aged fingers well, making biometric enrolment easier to add to access or attendance projects.
Key Highlights
- Integrated image collection and algorithm chip in one module
- 508 DPI sensing array with a 15mm effective collection area
- Stores up to 200 fingerprints for multi-user projects
- RS232 TTL interface on an MX1.0-6pin connector
- Runs from a 3.3V supply for easy board integration
- Reads dry, wet, light-texture and aged fingerprints
Ideal For
- Makers building fingerprint access control projects
- Integrators adding biometrics to attendance terminals
- Engineers designing lockable storage and safe systems
- Students learning about serial biometric modules
- Developers prototyping user verification on 3.3V boards
Buying Tip
Confirm your host board uses 3.3V TTL serial logic and can supply a stable 3.3V rail before wiring the module, since the R502-A is a bare module with no regulator or enclosure.
Elecvora expert review
Our verdict
The R502-A is a tidy, well-integrated module for anyone who needs fingerprint capture and matching without designing the algorithm side. Its 3.3V supply, serial interface and 200-fingerprint capacity make it straightforward to slot into access or attendance projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Image capture and matching on a single module
- 508 DPI sensor with a usable 15mm collection area
- Handles dry, wet, light-texture and aged fingers
- Serial cable included for the six-pin connector
- Compact and light for embedded builds
Cons
- Bare module with no enclosure or mounting hardware
- Requires a 3.3V host with TTL serial support
- No regulator or protection circuitry is described
Best for
Makers and integrators embedding fingerprint verification into access, attendance or storage projects
Not ideal for
Users wanting a plug-and-play standalone fingerprint door lock
Specifications
| Item Type | Module |
|---|---|
| Model No. / Name | Fingerprint Module |
| Operating Voltage (V) | 3.3 |
| Interface | RS232(TTL) |
| Resolution | 508 DPI |
| Connection | MX1.0-6pin |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 5 × 5 × 5 cm |
What's in the box
- 1 x R502-A Fingerprint Module
- 1 x 15cm 6-pin serial cable
Frequently Asked Questions
What voltage does the R502-A module need?
What interface does the module use?
How many fingerprints can it store?
What is included with the module?
Can it read dry or worn fingerprints?
How should I care for the sensor?
Overview
The Grow R502-A is a self-contained fingerprint module built for embedding into electronic projects. Instead of separating image capture and matching into two parts, it places the image collecting sensor and the algorithm chip on one board, so the module can handle enrolment and verification work itself. That makes it a practical choice when you want biometric identification in a design without building the matching logic from scratch.
The module is small, light and intended to be wired into a host system rather than used as a standalone device. It ships with a short serial cable that connects to its MX1.0-6pin socket.
Key Features
- All-in-one design: image collection and algorithm processing sit on the same module.
- 508 DPI sensing: a 192 x 192 pixel array captures fingerprint detail across a 15mm effective collection area.
- 200-fingerprint capacity: enough storage for a small team, a class or a multi-user access project.
- RS232 (TTL) interface: a serial connection that suits common microcontroller and development board projects.
- 3.3V operation: matches the logic level used by many modern boards.
- Broad finger tolerance: designed to recognise dry, wet, light-texture and aged fingerprints with high accuracy.
Specifications Explained
508 DPI resolution describes how finely the sensor samples a fingerprint. A higher sampling density captures more ridge detail, which supports more consistent matching.
192 x 192 pixel sensing array with a 15mm effective collection area tells you how much of the finger is read at once. The 15mm area is a sensible size for a fingertip press, so users do not need to position their finger with great precision.
RS232 (TTL) interface means the module talks over a serial link at TTL levels rather than full RS232 voltage levels. Check that your host board's serial pins are compatible before connecting.
3.3V operating voltage is the supply the module expects. Do not feed it a higher voltage.
MX1.0-6pin connection is the small six-pin socket on the module. The supplied 15cm six-pin serial cable plugs into it, so you do not need to source a matching connector separately.
Compatibility and Requirements
The module needs a 3.3V supply and a host device with an RS232 (TTL) serial interface. It is not a standalone unit: it has no display, keypad or enclosure, so it must be built into a larger system that sends commands and reads results. The included six-pin serial cable is the only connection hardware supplied.
Typical Uses
- Access control projects for doors and entry points
- Attendance and time-recording terminals
- Safety deposit boxes and lockable storage
- Student and maker projects exploring biometric identification
- Custom equipment that needs user verification
What's in the Box
- 1 x R502-A Fingerprint Module
- 1 x 15cm 6-pin serial cable
Quick specs
- Item Type
- Module
- Model No. / Name
- Fingerprint Module
- Operating Voltage (V)
- 3.3
- Interface
- RS232(TTL)
- Resolution
- 508 DPI
- Connection
- MX1.0-6pin



















