Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This light sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name GY 6180; sensor VL6180X; length (mm) 13.

Key Highlights

  • Model No. / Name: GY 6180
  • Sensor: VL6180X
  • Length (mm): 13

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameGY 6180
SensorVL6180X
Length (mm)13
Width (mm)10
ColorBlue
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 1 cm

Overview

The GY-6180 VL6180X Distance and Gesture Sensor Module is listed in our light sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: GY 6180
  • Sensor: VL6180X
  • Length (mm): 13 (measure your mounting space before ordering)
  • Width (mm): 10 (measure your mounting space before ordering)
  • Color: Blue
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 4 × 4 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Unsoldered Blue GY-6180 VL6180X is a versatile module integrating light sensing, distance measurement, and gesture recognition capabilities. Utilizing the VL6180X sensor provides accurate measurements. With unsoldered components and a distinctive blue color, it allows customization for electronic projects. 1. VIN This is the main power connection from 2.7 V to 5.5 V. The SCL and SDA level shifters pull the I² line high to this level. 2. GND Power ground (0 V) connection. Your I² control source must also share a common ground with this board. 3. I² data line with SDA/SDI/SDO level conversion, HIGH is VIN, LOW is 0 V. 4. SCL/SPC level shifted I ² clock line, HIGH is VIN, LOW is 0 V. 5. GPIO0/CE This pin is configured as the chip enables input when the VL6180X is powered on. The board pulls it up to VDD standard to the sensor. Drive this pin low to put the sensor in hardware standby. After VL6180X is powered on, this pin can be configured as a programmable interrupt output (VDD logic level). This input/output is not level-shifted. 6.GPIO1 programmable interrupt output (VDD logic level). In the hardware standby state, VL6180X also drives this pin low level. This output is not level-shifted.

Features:

  1. 2.8V voltage regulator: provide the required 2.8V for the sensor.
  2. I2C level shifter: provide a logic level shift from 2.8V to VCC.
  3. Three-in-one module/infrared transmitter/distance sensor/ambient light sensor: measuring distance up to 10cm, gesture recognition, I2C inter.
  4. Two programmable GPIOs: clear sensor board layout.

Package Includes:

1 x light sensor

1 x 6P Pin Header

Quick specs

Model No. / Name
GY 6180
Sensor
VL6180X
Length (mm)
13
Width (mm)
10
Color
Blue
Shipping Weight
0.01 kg
See all specifications