Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 22mm panel indicator that puts red, yellow and green LEDs in one unit with constant and flashing modes, accepting AC/DC 24V~220V. Its IP65 front sealing and base mounting make status signalling simple in control panels and machinery.

Key Highlights

  • Three LEDs in one unit: red, yellow and green
  • Wide AC/DC 24V~220V input covers many panel supplies
  • Constant and flashing modes for different status signals
  • IP65 protection against dust and water jets
  • Standard 22mm panel size with base installation
  • Compact, lightweight design for tight panel layouts

Ideal For

  • Panel builders assembling control cabinets
  • Maintenance technicians replacing panel indicators
  • Industrial automation integrators
  • Instrumentation and test equipment designers
  • DIY electronics and appliance project builders

Buying Tip

Check that your panel supply sits within the AC/DC 24V~220V range and that your cutout is 22mm before ordering, since this indicator is sized for that standard mounting hole.

Elecvora expert review

Our verdict

A practical three-colour indicator that reduces cutouts and part numbers thanks to its combined RYG layout and wide AC/DC voltage range. The IP65 front and 22mm base mounting make it a sensible choice for machine and switchboard panels.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three colours in a single 22mm cutout
  • Wide AC/DC 24V~220V input range
  • Constant and flashing modes in one unit
  • IP65 front sealing for dusty or wet environments
  • Base installation simplifies panel wiring

Cons

  • IP65 rating covers the front face, not the rear wiring
  • No mounting hardware or terminal details are specified
  • Flashing and constant behaviour depends on correct wiring

Best for

Control panels, switchboards and machinery needing compact multi-colour status indication

Not ideal for

Applications requiring voltage outside the AC/DC 24V~220V range or non-22mm cutouts

Specifications

ColorRed Yellow Green
Protection levelIP65
Size (mm)22
Voltage Rating (V)24V~220V
Shipping Weight0.001 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x HBJD-55A/D/3/RYG 22mm AC/DC 24V~220V red, yellow and green LED panel indicator with base installation

Frequently Asked Questions

What voltage does this indicator accept?
It is rated for AC/DC 24V~220V, so it can be used across that range rather than at a single fixed voltage.
Does it flash and stay steady?
Yes, the unit supports both constant and flashing illumination for the red, yellow and green LEDs.
What size hole does it need?
It is designed for a 22mm panel cutout and mounts using its base installation.
Is it waterproof?
It carries an IP65 protection rating, meaning the front is protected against dust and water jets; the rear wiring area is not covered by that rating.
What is included in the package?
The package contains one HBJD-55A/D/3/RYG 22mm red, yellow and green LED panel indicator with base installation.
How should I care for it?
Keep the front lens clean and avoid abrasive cleaners; isolate power before cleaning or servicing the panel.

Overview

The HBJD-55A/D/3/RYG is a panel indicator light built around a 22mm mounting size. It brings red, yellow and green LEDs together in a single housing, so a panel can show several states without three separate cutouts. The unit supports both constant and flashing illumination, giving you a steady light for normal status and a flashing light for attention or fault conditions.

Its AC/DC 24V~220V voltage range is the standout feature. The same indicator can be wired into low-voltage DC control circuits or higher-voltage AC panel supplies, which simplifies stock keeping for panel builders and repair technicians.

Key Features

  • Three colours in one body: red, yellow and green LEDs share a single 22mm panel mount.
  • Dual-mode signalling: constant and flashing operation suit both steady status and alert indication.
  • Broad input range: AC/DC 24V~220V covers a wide spread of control and machine voltages.
  • IP65 protection: the front is sealed against dust ingress and water jets.
  • Base installation: wiring connects through the supplied base for a tidy panel fit.

Specifications Explained

Voltage rating

The 24V~220V AC/DC rating means the indicator is designed to work across that range rather than at one fixed voltage. Confirm your panel supply falls inside it before wiring.

IP65 protection

IP65 indicates protection against dust and against water jets from any direction. That makes the front of the indicator suitable for machine panels and enclosures exposed to washdown or outdoor conditions, though the rating applies to the sealed face rather than the rear wiring.

22mm size

The 22mm figure is the standard panel cutout size, so the indicator fits common panel tooling and can replace similar-sized units.

Constant and flashing modes

Both lighting behaviours are supported, letting one part cover steady status lights and blinking warning signals.

Compatibility and Requirements

The indicator requires a panel supply within the AC/DC 24V~220V range and a 22mm mounting hole. Correct polarity and wiring should be checked against your circuit before installation. No additional drivers or controllers are specified for this product.

Typical Uses

  • Control panels and switchboards
  • Power equipment status indication
  • Industrial automation systems
  • Instrumentation and testing devices
  • Consumer appliances and DIY electronics projects

What's in the Box

1 x HBJD-55A/D/3/RYG 22mm AC/DC 24V~220V red, yellow and green LED panel indicator with base installation.

Quick specs

Color
Red Yellow Green
Protection level
IP65
Size (mm)
22
Voltage Rating (V)
24V~220V
Shipping Weight
0.001 kg
Shipping Dimensions
5 × 3 × 1 cm
See all specifications