Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 22 mm panel indicator with red, yellow and green LEDs and constant or flashing modes. Its wide AC/DC 24V-220V input and IP65 protection make it a practical status light for panels and equipment.

Key Highlights

  • Three LED colours: red, yellow and green in one indicator
  • Wide AC/DC 24V-220V input covers many circuits
  • Constant and flashing modes for different status signals
  • IP65 rated against dust and water spray
  • 22 mm size fits standard panel cutouts
  • Nut side installation for a secure, simple fit

Ideal For

  • Panel builders assembling control and switchgear enclosures
  • Maintenance technicians adding status lights to machinery
  • Industrial automation integrators needing multi-colour indication
  • DIY and hobby users building equipment panels
  • Test bench and instrumentation users signalling power or fault states

Buying Tip

Measure your panel cutout and confirm it is 22 mm, and check that your supply voltage sits within the AC/DC 24V-220V range before ordering.

Elecvora expert review

Our verdict

A practical multi-colour panel indicator that covers a wide voltage range and adds IP65 protection in a standard 22 mm format. It is a sensible choice where one indicator must show several machine states.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three colours in a single 22 mm indicator
  • Wide AC/DC 24V-220V input reduces variant stocking
  • Constant and flashing modes add signalling flexibility
  • IP65 protection suits dusty or spray-prone areas
  • Nut side fixing gives a secure panel fit

Cons

  • Only the stated 22 mm panel size is supported
  • Wiring and a suitable supply are required; no power source is included
  • Panel thickness and rear clearance must be checked before fitting

Best for

Control panels, machinery status indication and equipment warning lights

Not ideal for

Applications requiring a panel cutout other than 22 mm or a supply outside 24V-220V

Specifications

ColorRed Yellow Green
Protection levelIP65
Size (mm)22
Voltage Rating (V)24V~220V
Shipping Weight0.001 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x HBJD-55A/D/3/RYG/24V/C/P-22mm AC/DC 24V-220V constant flashing red, yellow, green LED warning indicator with nut side installation, IP65

Frequently Asked Questions

Can this indicator run on both AC and DC?
Yes. The product data lists an AC/DC 24V-220V rating, so it is intended for either AC or DC supplies within that range.
Does it flash and stay steady?
The indicator supports constant and flashing indication, so it can be used for steady status lights or blinking warning signals.
What panel size does it fit?
It is a 22 mm panel indicator, so the panel cutout should match 22 mm. Check the cutout and rear clearance before installation.
Is it protected against water?
It carries an IP65 rating, which indicates protection against dust and water spray. It is not described as suitable for full immersion.
What is included with the indicator?
The package includes one HBJD-55A/D three-colour LED warning indicator. A power supply and wiring are not included.
How should I care for it?
Keep the front lens clean and check the fixing nut remains tight. Isolate power before cleaning or inspecting the wiring.

Overview

The HBJD-55A/D is a compact panel indicator light built around three LEDs: red, yellow and green. It is designed to give clear visual status indication on control panels, switchboards, machinery and electrical equipment. A single 22 mm indicator can therefore show several conditions, such as power on, warning or fault, without fitting three separate lamps.

The unit accepts an AC/DC 24V-220V supply, which makes it flexible across low-voltage control circuits and higher-voltage panel supplies. It supports constant and flashing indication, so it can be used for steady status lights or attention-drawing warning signals. The IP65 rating means the front of the indicator is protected against dust ingress and water spray, which is useful in busy industrial or workshop environments.

Key Features

  • Three colours in one unit: red, yellow and green LEDs for multi-state signalling.
  • Wide voltage range: works on AC or DC supplies from 24V to 220V.
  • Constant and flashing modes: choose steady or blinking indication to suit the application.
  • IP65 protection: suitable where dust and water spray are present.
  • 22 mm panel size: a common indicator size for control and equipment panels.
  • Nut side installation: the fixing nut secures the indicator from the rear of the panel for a firm fit.

Specifications Explained

Voltage rating

The AC/DC 24V-220V rating is the most useful specification here. It means the indicator is not tied to a single supply voltage, so it can be used in different panel designs and equipment types. Always confirm the supply in your circuit falls within this range before connecting the indicator.

Protection level

IP65 indicates protection against dust and against water projected as a spray. This suits panel fronts and enclosures in workshops, plant rooms and industrial settings where occasional splashes or airborne dust are expected.

Size

The 22 mm size refers to the panel mounting diameter. Check that your panel cutout matches this size before installation, as the fixing nut and body are designed for a 22 mm opening.

Light source

The indicator uses LEDs, which are energy-efficient and long-lived compared with filament lamps. This reduces replacement frequency and keeps power consumption low.

Compatibility and Requirements

The indicator requires a supply within the stated AC/DC 24V-220V range and a 22 mm panel cutout. It is a panel-mount signalling device, so wiring and a suitable power source are needed for operation. No additional driver or controller is specified in the product data. Confirm your panel thickness and wiring access allow the nut side fixing to be tightened securely.

Typical Uses

  • Control panels and switchboards
  • Power equipment status indication
  • Industrial automation systems
  • Instrumentation and testing devices
  • Consumer appliances and DIY projects

What's in the Box

1 x HBJD-55A/D/3/RYG/24V/C/P-22mm AC/DC 24V-220V constant flashing red, yellow, green LED warning indicator with nut side installation, IP65.

Quick specs

Color
Red Yellow Green
Protection level
IP65
Size (mm)
22
Voltage Rating (V)
24V~220V
Shipping Weight
0.001 kg
Shipping Dimensions
5 × 3 × 1 cm
See all specifications