Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Hex Cube Orange Plus (IMU only) is a compact STM32H757 flight controller cube with triple-redundant, vibration-isolated and temperature-controlled IMUs. It plugs into compatible CubePilot carrier boards through a single 80-pin DF17 connector.

Key Highlights

  • STM32H757 processor with 1MB RAM for demanding autopilot firmware
  • Triple-redundant accelerometers and gyroscopes plus two barometers
  • Two IMU sets mechanically vibration-isolated to reduce frame vibration effects
  • Temperature-controlled IMUs maintain optimum working temperature
  • Single 80-pin DF17 connector for plug-in carrier board integration
  • PPM, SBUS and DSM signal support with 3.3V/5V selectable I/O

Ideal For

  • Multirotor builders using compatible CubePilot carrier boards
  • Fixed-wing UAV projects running ArduPilot or PX4
  • Commercial drone manufacturers designing custom carrier boards
  • Professionals upgrading to a triple-redundant flight controller cube
  • Hobbyists who already own a CubePilot carrier board

Buying Tip

Confirm you already have or can source a compatible CubePilot carrier board, since this listing includes the IMU cube only.

Elecvora expert review

Our verdict

A well-organised flight controller core for builders who value sensor redundancy and a clean single-connector interface. The IMU-only format keeps it focused for those with a suitable carrier board.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Triple-redundant accelerometers and gyroscopes
  • Two vibration-isolated IMU sets
  • Temperature-controlled IMUs
  • Compact cube format with one 80-pin connector
  • STM32H757 processor with 1MB RAM

Cons

  • Carrier board not included
  • Requires separate receiver and peripherals
  • No wiring loom or accessories listed

Best for

Builders with a compatible CubePilot carrier board who want redundant sensing

Not ideal for

First-time builders expecting a complete plug-and-fly controller

Specifications

Item TypeFlight Controller
ProcessorSTM32H757
Signal SystemPPM/SBUS/DSM
I/O pin voltage3.3V/5V
Shipping Weight0.034 kg
Shipping Dimensions5 × 5 × 3 cm

What's in the box

  • 1 x Hex Cube Orange Plus (IMU only)

Frequently Asked Questions

Is a carrier board included?
No. This listing is for the IMU cube only, so a compatible CubePilot carrier board is required to connect power, receivers and outputs.
Which receiver signals are supported?
The module accepts PPM, SBUS and DSM receiver signals.
What I/O voltage does it use?
I/O pin voltage is software selectable between 3.3V and 5V, so match it to your connected peripherals.
Which autopilot software can I run?
The Cube Orange Plus is designed for autopilot software such as ArduPilot and PX4.
How many sensors are inside?
It has three accelerometers, three gyroscopes, one magnetometer and two barometers, with two IMU sets mechanically vibration-isolated.
How should I mount it?
Keep it clear of direct motor vibration and use soft mounting where possible to support the built-in IMU isolation.

Overview

The Hex Cube Orange Plus (IMU only) is the flight management unit at the heart of a modular drone build. It packages the processor, inertial sensors and barometers into a small cube that connects to a carrier board through one 80-pin DF17 connector. Because this listing covers the IMU module only, it suits builders who already own a compatible CubePilot carrier board or manufacturers designing their own.

Key Features

  • STM32H757 processor with 1MB RAM for running full-featured autopilot firmware.
  • Triple redundancy across three accelerometers and three gyroscopes, with one magnetometer and two barometers.
  • Vibration isolation on two IMU sets to reduce the effect of frame vibration on sensor readings.
  • Temperature-controlled IMUs that hold their optimum working temperature.
  • 80-pin DF17 connector carrying all inputs and outputs for a plug-in installation.

Specifications Explained

The STM32H757 is the computing core of the cube, and its 1MB of RAM gives autopilot software room to handle sensor fusion and control loops. Triple redundancy means three accelerometers and three gyroscopes cross-check each other, so a single faulty reading is less likely to disturb flight. Two of the IMU sets sit on mechanical vibration isolation, which helps when a frame transmits motor vibration into the stack. Temperature control keeps the IMUs at a stable working temperature, supporting more consistent behaviour as ambient conditions change. The 80-pin DF17 connector is the interface to the carrier board, so every input and output passes through one plug rather than loose wiring. Receiver signals can be PPM, SBUS or DSM, and I/O pin voltage is selectable between 3.3V and 5V in software.

Compatibility and Requirements

This is the IMU-only cube, so a compatible CubePilot carrier board is required to connect peripherals, power and outputs. The module is designed for autopilot software such as ArduPilot and PX4. Check that your receiver outputs PPM, SBUS or DSM, and confirm your peripherals match the selected 3.3V or 5V I/O voltage.

Typical Uses

Multirotor, fixed-wing and professional UAV projects that need a compact, serviceable flight controller core. The plug-in connector layout also suits commercial system builders creating custom carrier boards.

What's in the Box

  • 1 x Hex Cube Orange Plus (IMU only)

Quick specs

Item Type
Flight Controller
Processor
STM32H757
Signal System
PPM/SBUS/DSM
I/O pin voltage
3.3V/5V
Shipping Weight
0.034 kg
Shipping Dimensions
5 × 5 × 3 cm
See all specifications