Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Hex Cubepilot, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: supported rc signals PPM/SBUS/DSM; power redundancy Triple redundancy; sensor Triple IMU System.

Key Highlights

  • Supported RC signals: PPM/SBUS/DSM
  • Power redundancy: Triple redundancy
  • Sensor: Triple IMU System

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Supported RC signalsPPM/SBUS/DSM
Power redundancyTriple redundancy
SensorTriple IMU System
Sensors detailsIMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro)
Supported firmware ArdupilotPX4, and Hionos 00-178C
Supported vehicle typeFixed-wing plane Multicopters Helicopter VTOL-plane Rover/boat/submarine
Weight (g)73
Additional Specs.Carrier Board Size (mm): 94 x 44.3 x 7.3, Chassis Material: CNCAluminum Alloy(cube) +ABS Molding(Carrier Board), Cube Size (mm): 38.4 x 38.4 x 22
Operating Temperature (°C)-10+55° IMU with temperature control
PWM I/O14
GPS/Serial interfaces4
Debug Interface2
I2C2

Overview

The Cube Orange+ Standard Set ADS-B, made by Hex Cubepilot, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Supported RC signals: PPM/SBUS/DSM (confirm your cable or board uses the same connector)
  • Power redundancy: Triple redundancy
  • Sensor: Triple IMU System
  • Sensors details: IMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro)
  • Supported firmware Ardupilot: PX4, and Hionos 00-178C (confirm your cable or board uses the same connector)
  • Supported vehicle type: Fixed-wing plane Multicopters Helicopter VTOL-plane Rover/boat/submarine (confirm your cable or board uses the same connector)
  • Weight (g): 73 (important for drones, RC models and anything you carry)
  • Additional Specs.: Carrier Board Size (mm): 94 x 44.3 x 7.3, Chassis Material: CNCAluminum Alloy(cube) +ABS Molding(Carrier Board), Cube Size (mm): 38.4 x 38.4 x 22 (affects weight, heat handling and how the part wears)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Cube Orange+ Standard Set ADS-B comes with an H7 processor, features a 1,090 MHz ADS-B receiver from Avionic, automatically avoids aircraft, and Is integrated into the new ADS-B carrier board. Through the parameter setting, the autopilot can optionally set up the cube to allow the vehicle to automatically avoid an aircraft that is detected in an exclusion zone set by the pilot. The Cube Orange

  1. Cube Orange targets education, amateur drone lovers, and professionals with cost-effective flight control hardware.
  2. Includes new generation of more powerful H7 processor, with stronger performance, faster processing, and increased security with built-in
  3. triple-redundant sensors, temperature control shock absorption IMU.
  4. With the help of flight software, Cube Orange can completely fly any remotely controlled aircraft, helicopter or multi-rotor vehicle and turn it into a more professional UAV platform.

ADS-B Carrier Board

  1. A standard carrier board with an integrated 1090MHz ADS-B receiver allows the software to receive information about the location of manned aircraft in the area.
  2. Receives information such as position, altitude, speed, etc, which can all be viewed in Mission Planner.
  3. Through settings, you can optionally set up your cube to allow the vehicle to automatically avoid aircraft that is within an exclusion zone set by you

Note: Due to the increase in USD prices, product prices have been revised. Products are available on pre-order.


Features:

  1. Built-in IMU Heating system, allowing flights at extreme temperatures (below freezing)
  2. Robust DF17 Interface connectors give enhanced drop and shock resistance
  3. Air-frames: VTOL, Plane, Multi-copter, Traditional Heli, Rover, Boat, Sub, General Robotics

Packages Includes:

1 x The Cube Orange Plus with ADSB Carrier Board Kit Included
1x Cube Orange+
1x ADSB Carrier Board
1x Power Brick Mini
1x I2C Board
1x Buzzer Cable
2x CAN Cable
1x Power Brick Mini Cable
1x GPS1 Cable
1x Micro USB Cable
2x I2C Cable
4x Mounting Screw
3x 3M Large Sticker
2x 3M Medium Sticker
4x 3M Small Sticker  

Quick specs

Supported RC signals
PPM/SBUS/DSM
Power redundancy
Triple redundancy
Sensor
Triple IMU System
Sensors details
IMUl(lsolated) ICM42688 IMU2(1solated) ICM20948 or ICM42688 IMU3(Fixed) ICM20649 or ICM45686 MS5611x 2(Baro)
Supported firmware Ardupilot
PX4, and Hionos 00-178C
Supported vehicle type
Fixed-wing plane Multicopters Helicopter VTOL-plane Rover/boat/submarine
See all specifications