Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A DroneCAN GNSS module built on the u-blox NEO M9N receiver with an STM32G4 processor and BMM150 compass. It communicates over CAN bus, so it frees a flight controller serial port and handles interference better than a serial link.

Key Highlights

  • u-blox NEO M9N receiver tracks up to four GNSS constellations
  • STM32G4 processor at 170MHz with 512K flash runs DroneCAN
  • BMM150 compass supplies heading data alongside position
  • CAN bus connection leaves flight controller serial ports free
  • 5Hz default navigation update rate, expandable to 10Hz
  • Compact 54mm diameter housing with 14.5mm thickness

Ideal For

  • Multirotor builders using DroneCAN flight controller setups
  • Fixed-wing pilots who want a compass and GNSS in one unit
  • FPV and long-range builds with limited free serial ports
  • Users adding multiple CAN devices to a single bus
  • Pilots flying in regions relying on Galileo, GLONASS or BeiDou

Buying Tip

Confirm your flight controller supports DroneCAN over CAN bus and check that your power source stays within the 4.7 to 5.2V input range before wiring the module.

Elecvora expert review

Our verdict

The Holybro DroneCAN M9N GPS is a well-considered module for DroneCAN-based builds, pairing a capable multi-constellation receiver with on-board processing and a compass. Its CAN bus design is the main draw for pilots who want to free serial ports and reduce wiring complexity.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Up to four concurrent GNSS constellations for a more robust fix
  • DroneCAN over CAN bus frees flight controller serial ports
  • On-board STM32G4 processor and BMM150 compass
  • Multiple CAN devices can share one bus via a splitter board
  • Tri-colour LED simplifies status checks

Cons

  • Requires a flight controller that supports DroneCAN
  • CAN splitter board needed for multiple devices, not included
  • Serial-only flight controllers will not work without CAN support

Best for

DroneCAN-equipped multirotor and fixed-wing builds

Not ideal for

Flight controllers without CAN bus or DroneCAN support

Specifications

Item TypeGPS Module
GNSSUblox NEO M9N
No. of Concurrent GNSSUp to 4 GNSS (GPS, Galileo, GLONASS, BeiDou)
ProcessorSTM32G4 (170MHz, 512K FLASH)
CompassBMM150
BandwidthGPS: L1C/A GLONASS: L10F Beidou: B1I Galileo: E1B/C
Navigation Update Rate5Hz Default(10Hz MAX)
Accuracy2.5
Refresh Speed (ms)0.05
Current consumptionLess than 200mA @ 5V
Input Voltage (V)4.7 to 5.2
Operating Temperature (°C)-40~80C
Size (mm)Diameter: 54mm Thickness: 14.5mm
Shipping Weight0.111 kg
Shipping Dimensions14 × 12 × 5 cm

What's in the box

  • 1 x Holybro DroneCAN M9N GPS

Frequently Asked Questions

Which satellite systems does this module receive?
It uses the u-blox NEO M9N receiver and can track up to four GNSS systems concurrently: GPS, Galileo, GLONASS and BeiDou.
Does it use a serial port on my flight controller?
No. The module communicates over a CAN bus using the DroneCAN protocol, so it does not occupy a flight controller serial port.
What input voltage does it need?
The module accepts 4.7 to 5.2V and draws less than 200mA at 5V.
Can I connect several CAN devices at once?
Yes. Different CAN devices can share the same CAN bus when connected through a CAN splitter board.
What is included in the package?
The package contains one Holybro DroneCAN M9N GPS module.
What is the navigation update rate?
The default rate is 5Hz, with a maximum of 10Hz.

Overview

The Holybro DroneCAN M9N GPS is a positioning and compass module for drone builds that use the DroneCAN protocol. It combines a u-blox NEO M9N GNSS receiver with an STM32G4 processor and a BMM150 compass in a round 54mm housing. Rather than sending data over a serial UART, the module talks to the flight controller across a CAN bus, which keeps a serial port free for other peripherals.

Key Features

  • Multi-constellation reception: the NEO M9N can track up to four GNSS systems at once, covering GPS, Galileo, GLONASS and BeiDou.
  • Dedicated processing: an STM32G4 running at 170MHz with 512K flash handles the DroneCAN stack on board.
  • Built-in compass: the BMM150 magnetometer provides heading information for navigation.
  • CAN bus architecture: multiple CAN devices can share one bus through a CAN splitter board.
  • Status feedback: a tri-colour LED indicator shows the module state at a glance.

Specifications Explained

The receiver supports GPS L1C/A, GLONASS L10F, BeiDou B1I and Galileo E1B/C, so it can draw on several satellite systems for a more robust fix. Navigation updates at 5Hz by default and can reach a maximum of 10Hz, which is adequate for most multirotor and fixed-wing flight controllers. Accuracy is listed at 2.5, and the module draws under 200mA at 5V with an input range of 4.7 to 5.2V. It is rated for operation from -40 to 80 degrees Celsius. The 54mm diameter and 14.5mm thickness keep the footprint modest on a frame.

Compatibility and Requirements

The module requires a flight controller or CAN node that supports the DroneCAN protocol and a CAN bus connection. Power must be supplied within the 4.7 to 5.2V input range. Because it does not use a serial port, the flight controller's UARTs remain available for other devices. A CAN splitter board is needed if you want to connect several CAN devices to the same bus.

Typical Uses

This module suits multirotor and fixed-wing builds where clean wiring and interference resistance matter, and where the flight controller already uses or plans to use DroneCAN peripherals. It is also a practical choice for builds that have run out of free serial ports.

What's in the Box

  • 1 x Holybro DroneCAN M9N GPS

Quick specs

Item Type
GPS Module
GNSS
Ublox NEO M9N
No. of Concurrent GNSS
Up to 4 GNSS (GPS, Galileo, GLONASS, BeiDou)
Processor
STM32G4 (170MHz, 512K FLASH)
Compass
BMM150
Bandwidth
GPS: L1C/A GLONASS: L10F Beidou: B1I Galileo: E1B/C
See all specifications