Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Holybro, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type Flight Controller; model no. / name Kakute H7 V1.5; mcu type STM32H743 32-bit processor running at 480 MHz. Check that your power source supplies 2S - 8S before connecting it.

Key Highlights

  • Item Type: Flight Controller
  • Model No. / Name: Kakute H7 V1.5
  • MCU Type: STM32H743 32-bit processor running at 480 MHz

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeFlight Controller
Model No. / NameKakute H7 V1.5
MCU TypeSTM32H743 32-bit processor running at 480 MHz
IMU sensorMPU6000
BarometerBMP280
OSD ChipAT7456E chip
Battery Input Voltage (V)2S - 8S
Shipping Weight0.1 kg
Shipping Dimensions7 × 7 × 4 cm

Overview

The Holybro Kakute H7 V1.5 Flight Controller, made by Holybro, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Flight Controller
  • Model No. / Name: Kakute H7 V1.5
  • MCU Type: STM32H743 32-bit processor running at 480 MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • IMU sensor: MPU6000
  • Barometer: BMP280 (space for firmware, files or media)
  • OSD Chip: AT7456E chip
  • Battery Input Voltage (V): 2S - 8S (note the battery type so you can order spares or the right charger)
  • Shipping Weight: 0.1 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Holybro Kakute H7 v1.5 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V/3A BEC, easy soldering layout and much more. The Kakute H7 builds upon the best features of its F7 predecessor and further improves on hardware components and layout. With the additional integrated Bluetooth chip onboard, you can perform Betaflight configuration and tune wirelessly on your phone with the SpeedyBee Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V regulator designed to power your HD video transmitter like DJI/Caddx FPV Air Unit & Caddx Vista while supporting analog system. It has 6x dedicated UART ports with built-in inversion for peripherals (UART2 is used for Bluetooth telemetry), along with a full MicroSD Card slot for virtually unlimited Blackbox data logging. Dual plug-and-play 4in1 ESC connectors, allowing easy plug-and-play support for x8 Octocopter configuration and keeping it simple and clean. The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features, and more. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pads, and I2C pads (SDA & SCL) for external GPS/Magnetometers.


Features:

  1. MCU - STM32H743 32-bit processor running at 480 MHz
    1. Professional underfill epoxy for mechanical reinforcement
  2. IMU - MPU6000
  3. Barometer - BMP280
  4. OSD - AT7456E
  5. Onboard Bluetooth chip - ESP32-C3
    1. SpeedyBee IOS & Android App Compatible
    2. Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight
  6. 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
  7. 9x PWM Outputs (8 Motor Output, 1 LED)
  8. 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
  9. 1x JST-SH1.0 6pin VTX port (For HD Systems like Caddx Vista & Air Unit)
  10. Battery input voltage: 2S - 8S
  11. BEC 5V 2A Cont.
  12. BEC 9V 3A Cont
  13. USB Type-C
  14. Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
  15. Dimension - 35x35mm
  16. Weight - 8g

Package Includes:

1 x Kakute H7 V1.5 Flight Controller

4 x M3 Silicon Grommets

2 x JST-SH1.0_8pin 150mm Cable (For ESCs)

2 x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)

1 x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VT

 

 

Quick specs

Item Type
Flight Controller
Model No. / Name
Kakute H7 V1.5
MCU Type
STM32H743 32-bit processor running at 480 MHz
IMU sensor
MPU6000
Barometer
BMP280
OSD Chip
AT7456E chip
See all specifications