
1 / 4 · Click to enlarge
AI Summary
A compact u-blox M10 GNSS module with an IST8310 compass, 25 x 25 mm patch antenna and JST-GH-10P connector. It tracks four constellations concurrently for fast, accurate positioning on FPV and autonomous builds.
Key Highlights
- u-blox M10 receiver tracks GPS, Galileo, GLONASS and BeiDou concurrently
- IST8310 compass adds heading data for navigation and return-to-home
- High-gain 25 x 25 x 4 mm ceramic patch antenna with active circuitry
- Up to 25 Hz nav update rate on single GNSS, 2.0 m CEP accuracy
- Integrated buzzer, safety switch and tricolored LED indicator
- JST-GH-10P connector with 26 cm cable, 4.7 to 5.2 V input
Ideal For
- FPV pilots adding GPS rescue and return-to-home
- ArduPilot and PX4 multicopter builders
- Fixed-wing and rover projects needing compass heading
- Builders upgrading to a u-blox M10 receiver
- Pilots who want an integrated buzzer and safety switch
Buying Tip
Confirm your flight controller uses a JST-GH-10P GPS port and runs PX4 1.14, ArduPilot 4.3, INAV 5.0.0 or Betaflight 4.3.0 or newer before ordering, since the module ships at 115200 bps.
Elecvora expert review
Our verdict
The Holybro M10 GPS packs a modern u-blox receiver, compass, antenna, buzzer and safety switch into a small, tidy package that is easy to mount. It is a sensible choice for builders who want dependable positioning without extra wiring or separate components.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four-constellation tracking with u-blox M10 receiver
- Integrated IST8310 compass, buzzer and safety switch
- High-gain 25 x 25 mm patch antenna in a compact 32 g body
- Wide 4.7 to 5.2 V input range and low current draw
Cons
- Requires recent firmware such as PX4 1.14 or ArduPilot 4.3
- Only the JST-GH-10P connector option is specified here
- No mounting hardware beyond the carbon fiber mount is listed
Best for
FPV and autonomous builds needing GPS position and compass heading in one module
Not ideal for
Projects with older firmware or non-JST-GH GPS ports
Specifications
| Item Type | GPS Module |
|---|---|
| GNSS Receiver | 1. Ublox M10 2. Up to 4 GNSS 3.BeiDou |
| No. of Concurrent GNSS | 1. Galileo 2. GLONASS 3. GPS 4. QZSS |
| Compass | IST8310 |
| Output Protocol | 1. UBX (U-blox) 2. NMEA |
| Accuracy | 2.0m CEP |
| Nav. update rate | 1. Up to 25 Hz (single GNSS), 2. Up to 10 Hz (4 concurrent GNSS) |
| Baud Rate (bps) | 115200 |
| Input Voltage (V) | 4.7 to 5.2 |
| Port Type | JST-GH-10P |
| Antenna (Y/N) | 25 x 25 x 4 mm ceramic patch antenna |
| Power Consumption (W) | Less than 200mA @ 5V |
| Operating Temperature (°C) | -40~80C |
| Overall Dimension | φ50 x14.4 mm |
| Weight (g) | 32g |
| Cable Length | 26 |
| Shipping Weight | 0.110 kg |
| Shipping Dimensions | 14 × 12 × 5 cm |
What's in the box
- 1x M10 GPS Module
- 1x Fixed Carbon Fiber GPS mount
Frequently Asked Questions
Which GNSS constellations does the M10 GPS support?
What compass is included?
What input voltage does it need?
Which firmware versions are supported?
What is included in the box?
How should I care for the module?
Overview
The Holybro M10 GPS is a ready-to-mount GNSS module for multicopters and fixed-wing builds that need reliable position and heading data. At its core is the u-blox M10 receiver, which can track up to four GNSS constellations at once: GPS, Galileo, GLONASS and BeiDou. Combined with a 25 x 25 x 4 mm ceramic patch antenna and active front-end circuitry, it delivers 2.0 m CEP accuracy in a housing measuring just 50 mm across and 14.4 mm tall.
An IST8310 compass is built in, so the module supplies heading as well as position over a single JST-GH-10P connection. The board also carries a tricolored LED indicator, a buzzer and a safety switch, keeping status feedback and arming control close to the GPS mount. A rechargeable backup battery supports warm starts, helping the receiver fix quickly after a brief power cycle.
Key Features
- Multi-constellation reception: GPS, Galileo, GLONASS and BeiDou can be received concurrently through the multi-band RF front end.
- Fast update rates: up to 25 Hz with a single GNSS, or up to 10 Hz with four constellations active.
- Integrated compass: the IST8310 provides magnetometer heading for navigation modes.
- Onboard indicators and controls: tricolored LED, buzzer and safety switch simplify setup and pre-flight checks.
- Practical power range: runs from 4.7 to 5.2 V and draws less than 200 mA at 5 V.
Specifications Explained
Receiver and accuracy: the u-blox M10 engine outputs both UBX and NMEA protocols at 115200 bps, so it works with common ground control and autopilot stacks. The 2.0 m CEP figure describes typical horizontal positioning performance under open sky.
Update rate: the 25 Hz single-constellation rate suits fast logging and responsive navigation, while the 10 Hz four-constellation rate balances precision with processing load. Choose the mode that matches your flight controller and firmware.
Antenna: the 25 x 25 x 4 mm ceramic patch is omnidirectional in radiation pattern, which gives flexibility when deciding where to mount the module on the frame.
Environment: an operating range of -40 to 80 C covers cold-weather flying and hot summer days alike.
Compatibility and Requirements
The module uses a JST-GH-10P port and a 26 cm cable. Firmware support for the M10 GPS requires PX4 1.14, ArduPilot 4.3, INAV 5.0.0 or Betaflight 4.3.0 and newer. Check your flight controller's port pinout and firmware version before installation.
Typical Uses
FPV pilots adding position hold and return-to-home, ArduPilot and PX4 users building autonomous copters, and fixed-wing or rover projects that need compass heading alongside GNSS position. The compact 32 g body and carbon fiber mount make it easy to place on frames where space is limited.
What's in the Box
- 1x M10 GPS Module
- 1x Fixed Carbon Fiber GPS mount
Quick specs
- Item Type
- GPS Module
- GNSS Receiver
- 1. Ublox M10 2. Up to 4 GNSS 3.BeiDou
- No. of Concurrent GNSS
- 1. Galileo 2. GLONASS 3. GPS 4. QZSS
- Compass
- IST8310
- Output Protocol
- 1. UBX (U-blox) 2. NMEA
- Accuracy
- 2.0m CEP



















