
1 / 5 · Click to enlarge
AI Summary
A compact u-blox M9N GNSS module that tracks up to four constellations at once and includes an IST8310 compass. Its small 16 g cased footprint and 25 Hz update rate make it a practical fit for space-limited drone builds.
Key Highlights
- u-blox M9N receiver with up to four concurrent GNSS constellations
- Covers GPS, Galileo, GLONASS, BeiDou, SBAS and QZSS L1 bands
- Navigation update rate of up to 25 Hz for responsive positioning
- Integrated IST8310 compass for heading information
- Compact cased size of 34 x 28 x 11 mm at 16 g
- Rechargeable backup battery supports warm starts
Ideal For
- FPV pilots building compact multirotors
- Drone builders needing a small GPS and compass module
- Fixed-wing pilots adding GPS-assisted navigation
- Makers upgrading to a multi-constellation receiver
- Pilots working with PX4, ArduPilot, INAV or Betaflight stacks
Buying Tip
Confirm your flight controller firmware version and free JST-GH 6-pin port before ordering, since the module uses a 115200 bps serial connection.
Elecvora expert review
Our verdict
A well-rounded compact GNSS module that pairs a capable u-blox M9N receiver with an onboard compass in a light, cased package. It is a sensible choice for builders who want multi-constellation positioning without sacrificing space.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Up to four concurrent GNSS constellations
- Up to 25 Hz navigation update rate
- Integrated IST8310 compass
- Light 16 g cased weight
- Backup battery for warm starts
Cons
- Requires a compatible flight controller firmware version
- Serial port must be set to 115200 bps
- Case adds a small amount of size and weight
Best for
Compact drone and FPV builds needing GPS and compass in one small module
Not ideal for
Builders without a spare JST-GH serial port or compatible firmware
Specifications
| Item Type | GPS |
|---|---|
| No. of Concurrent GNSS | Up to 4 GNSS - BeiDou - Galileo - GLONASS - GPS - QZSS |
| Frequency Band | - GPS L1 - Galileo E1 - GLONASS L1 - BeiDou B1 - SBAS L1 - QZSS L1 |
| Nav. update rate | Up to 25 Hz (4 concurrent GNSS) |
| Baud Rate (bps) | 115200 |
| Input Voltage (V) | 4.7-5.2V |
| Current consumption | Less than 200mA @ 5V |
| Operating Temperature (°C) | -40~80C |
| Overall Dimension | - 32 x 26 x 9mm (w/o Case) - 34 x 28 x 11mm (With Case) |
| Weight (g) | - 14g (w/o Case) - 16g (With Case) |
| Shipping Weight | 0.031 kg |
| Shipping Dimensions | 13 × 9 × 2 cm |
What's in the box
- 1x Micro GPS module
- 1x JST-GH 6-position connector, 15 cm
- 1x JST-GH 6-pin coloured silicone cable, 15 cm
Frequently Asked Questions
Which GNSS constellations does this module support?
What is the navigation update rate?
What input voltage does it need?
Does it include a compass?
What is included in the box?
Which firmware versions are required?
Overview
The Holybro Micro M9N GPS With Case is a small GNSS module for drone and FPV builds that need reliable positioning without adding bulk. At its core is the u-blox M9N receiver, a concurrent GNSS engine that can receive and track multiple satellite systems at the same time. The multi-band RF front-end allows GPS, Galileo, GLONASS and BeiDou to be received concurrently, with SBAS L1 and QZSS L1 also supported.
The module ships with a protective case, bringing it to 34 x 28 x 11 mm and 16 g. Without the case it measures 32 x 26 x 9 mm and weighs 14 g, so builders can choose the configuration that suits their frame. An IST8310 compass is integrated for heading data, and a rechargeable backup battery helps the receiver achieve warm starts.
Key Features
- u-blox M9N receiver: concurrent tracking of up to four GNSS constellations.
- Wide band coverage: GPS L1, Galileo E1, GLONASS L1, BeiDou B1, SBAS L1 and QZSS L1.
- Fast updates: navigation update rate of up to 25 Hz with four concurrent GNSS.
- IST8310 compass: onboard magnetometer for heading information.
- Patch antenna: high-gain 25 x 25 mm ceramic patch with an omnidirectional radiation pattern.
- Backup battery: rechargeable cell for warm starts.
Specifications Explained
The 115200 bps baud rate is the serial speed the module uses to talk to a flight controller, so it must match the port configuration in your firmware. Input voltage is 4.7-5.2V, and current consumption stays below 200 mA at 5V, which is modest for a GPS module and easy to supply from a typical flight controller rail.
The up-to-25 Hz update rate matters most for fast-moving craft, where fresher position data helps navigation loops keep up. The operating range of -40 to 80 degrees Celsius covers a wide spread of climates. The 25 x 25 mm patch antenna and omnidirectional pattern mean the module does not need to be aimed precisely, giving more freedom when mounting on a frame.
Compatibility and Requirements
The module connects through a JST-GH 6-pin interface, and the package includes a 15 cm JST-GH 6-position connector and a 15 cm JST-GH 6-pin coloured silicone cable. Firmware support for the M10 GPS requires PX4 1.14, ArduPilot 4.3, INAV 5.0.0 or Betaflight 4.3.0 and newer, so check your firmware version before installation.
Typical Uses
The small cased footprint suits multirotor, FPV and fixed-wing builds where board space is limited. The combination of multi-constellation tracking and an onboard compass makes it useful for craft that rely on GPS-assisted modes, and the light weight keeps it practical for smaller airframes.
What's in the Box
- 1x Micro GPS module
- 1x JST-GH 6-position connector, 15 cm
- 1x JST-GH 6-pin coloured silicone cable, 15 cm
Quick specs
- Item Type
- GPS
- No. of Concurrent GNSS
- Up to 4 GNSS - BeiDou - Galileo - GLONASS - GPS - QZSS
- Frequency Band
- - GPS L1 - Galileo E1 - GLONASS L1 - BeiDou B1 - SBAS L1 - QZSS L1
- Nav. update rate
- Up to 25 Hz (4 concurrent GNSS)
- Baud Rate (bps)
- 115200
- Input Voltage (V)
- 4.7-5.2V



















