
1 / 2 · Click to enlarge
At a glance
Made by Holybro, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type autopilot controller(Plastic); fmu processor STM32F765; input voltage 6v. Check that your power source supplies 6v before connecting it.
Key Highlights
- Item Type: autopilot controller(Plastic)
- FMU Processor: STM32F765
- Input Voltage: 6v
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | autopilot controller(Plastic) |
|---|---|
| FMU Processor | STM32F765 |
| Input Voltage | 6v |
| Max current sensing | 120 A |
| Shipping Weight | 0.21 kg |
| Shipping Dimensions | 14 × 10 × 9 cm |
Overview
The Holybro Pixhawk 4(aluminum case), made by Holybro, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: autopilot controller(Plastic)
- FMU Processor: STM32F765 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Input Voltage: 6v (match this to your power supply; too high a voltage can damage the part)
- Max current sensing: 120 A (your supply must deliver at least this much current)
- Shipping Weight: 0.21 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 14 × 10 × 9 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Processor: STMicroelectronics STM32F7, 2MB flash, 512KB RAM.
- Sensors: Bosch and InvenSense IMUs with vibration isolation.
- Connectivity: 2 SPI buses, 4 I2C buses for sensors and peripherals.
- OS: NuttX real-time operating system for reliable control.
- Durability: Aluminum case for enhanced cooling and protection.
- Size & Weight: 90mm x 50mm x 30mm, approx. 70g.
- Compatibility: Works with ArduPilot and PX4 software
Package Includes:
1 x Holybro Pixhawk 4(aluminum case)Quick specs
- Item Type
- autopilot controller(Plastic)
- FMU Processor
- STM32F765
- Input Voltage
- 6v
- Max current sensing
- 120 A
- Shipping Weight
- 0.21 kg
- Shipping Dimensions
- 14 × 10 × 9 cm



















