Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Pixhawk 6C flight controller kit pairing an H7-based board with a PM02 12S power module and M9N GPS. Redundant IMUs, vibration isolation and pre-installed PX4 make it a practical core for autonomous vehicle builds.

Key Highlights

  • STM32H743 Arm Cortex-M7 core running at up to 480 MHz
  • 2MB flash memory and 1MB RAM for demanding algorithms
  • Redundant IMUs from Bosch and InvenSense
  • Integrated vibration isolation filters high-frequency noise
  • Onboard heating resistors keep IMUs at optimum temperature
  • Includes PM02 V3 12S power module and M9N GPS

Ideal For

  • University researchers developing autonomous flight code
  • Startup engineering teams prototyping UAV platforms
  • Commercial drone developers needing redundant IMUs
  • Students learning PX4-based autopilot systems
  • Labs building custom unmanned vehicles

Buying Tip

Confirm your airframe and peripheral wiring against the Pixhawk 6C connector standard and plan for a 12S-compatible power setup with an XT60 connection before ordering.

Elecvora expert review

Our verdict

The Pixhawk 6C kit is a sensible starting point for developers who want an H7-class controller with redundant IMUs, vibration isolation and PX4 already installed, plus matched power and GPS hardware in one purchase. It rewards careful wiring and configuration rather than plug-and-play convenience.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Cortex-M7 core at up to 480 MHz with 2MB flash and 1MB RAM
  • Redundant Bosch and InvenSense IMUs
  • Integrated vibration isolation and heated IMUs
  • PX4 Autopilot pre-installed
  • PM02 V3 12S power module and M9N GPS included

Cons

  • No battery, radio or telemetry included
  • Requires careful connector-standard wiring and configuration
  • 12S power module suits specific power setups, not all builds

Best for

Developers and research teams building PX4-based autonomous vehicles

Not ideal for

Beginners wanting a fully assembled, ready-to-fly drone

Specifications

Item TypeKit
Model No. / Name6C PM02 M9N
Connector TypeXT60
ProcessorH7 micro-controller contain the Arm Cortex-M7 core
Clock Speed480 MHz
RAM1MB
Flash Memory2mb
GPSM9N
Shipping Weight0.295 kg
Shipping Dimensions15 × 13 × 5 cm

What's in the box

  • 1 x Pixhawk 6C Flight Controller Module (Plastic Case)
  • 1 x PM02 V3 12S Power Module
  • 1 x Cable Set
  • 1 x M9N GPS

Frequently Asked Questions

What software comes on the Pixhawk 6C?
PX4 Autopilot is pre-installed on the controller. You will still need to configure and calibrate it for your airframe.
What processor and memory does the board use?
It uses an STM32H743 microcontroller with an Arm Cortex-M7 core running up to 480 MHz, plus 2MB flash and 1MB RAM.
What power module is included?
The kit includes a PM02 V3 12S power module with an XT60 connector.
Is a GPS included?
Yes, an M9N GPS unit is part of the kit, along with a cable set for connections.
Does the kit include a battery or radio?
No. The box contains the flight controller module, PM02 V3 12S power module, cable set and M9N GPS only.
How should I care for the controller?
Keep the vibration isolation system intact, protect the board from moisture and impact, and check connectors and sensor readings during regular pre-flight inspections.

Overview

The Holybro Pixhawk 6C kit brings together three parts that builders usually source separately: the Pixhawk 6C flight controller in its plastic case, a PM02 V3 12S power module and an M9N GPS. The controller follows the Pixhawk FMUv6C open standard and connector standard, and PX4 Autopilot is pre-installed, so the foundation software is already in place when the kit arrives.

At the centre is an STMicroelectronics STM32H743 microcontroller with an Arm Cortex-M7 core clocked up to 480 MHz, paired with 2MB flash and 1MB RAM. That headroom supports complex algorithms and models, which matters to developers iterating on control logic rather than flying simple manual missions.

Key Features

  • H7 processing: Cortex-M7 core at up to 480 MHz with 2MB flash and 1MB RAM.
  • Redundant sensing: IMUs from Bosch and InvenSense in a redundant layout.
  • Vibration control: An integrated isolation system filters high-frequency vibration and reduces noise for more accurate readings.
  • Temperature stability: Onboard heating resistors hold the IMUs at an optimum working temperature.
  • Compact build: A low-profile form factor keeps the install tidy.
  • Matched power and positioning: The PM02 V3 12S power module and M9N GPS ship in the same box.

Specifications Explained

The 480 MHz clock speed and the memory figures describe how much processing and storage the board offers for estimation, navigation and custom code. Redundant IMUs mean more than one inertial sensor is available, which is valuable when reliability matters more than saving grams. The vibration isolation system addresses a common source of poor flight behaviour: high-frequency vibration reaching the sensors. Because the IMUs are temperature-controlled by heating resistors, readings stay steadier across changing conditions. The XT60 connector type on the power module is worth noting when planning your harness.

Compatibility and Requirements

The kit is built around PX4 Autopilot, which is pre-installed. The PM02 V3 power module is a 12S unit and uses an XT60 connector. Beyond these points, check your airframe, propulsion and peripheral choices against the Pixhawk 6C connector standard before purchase, since the kit does not include a battery, radio system, telemetry or airframe.

Typical Uses

Corporate research labs, startups, university researchers, professors and students, and commercial teams use this class of controller for autonomous vehicle development. It fits multirotor and other unmanned platforms where a compact, cost-effective control core with redundant sensing is preferred.

What's in the Box

  • 1 x Pixhawk 6C Flight Controller Module (plastic case)
  • 1 x PM02 V3 12S Power Module
  • 1 x Cable Set
  • 1 x M9N GPS

Quick specs

Item Type
Kit
Model No. / Name
6C PM02 M9N
Connector Type
XT60
Processor
H7 micro-controller contain the Arm Cortex-M7 core
Clock Speed
480 MHz
RAM
1MB
See all specifications