Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Pixhawk FMUv6C flight controller with an STM32H743 processor at 480 MHz and PX4 pre-installed. Redundant IMUs, vibration isolation and heated sensors support reliable autonomous flight development.

Key Highlights

  • STM32H743 Cortex-M7 processor running up to 480 MHz
  • 2 MB flash memory and 1 MB SRAM for complex algorithms
  • Redundant IMUs from InvenSense and Bosch plus IST8310 magnetometer
  • MS5611 barometer for altitude sensing
  • Integrated vibration isolation with temperature-controlled IMUs
  • PX4 Autopilot pre-installed on the FMUv6C open standard

Ideal For

  • University research teams testing control algorithms
  • Startups prototyping autonomous drone platforms
  • Commercial drone developers needing redundant IMUs
  • Corporate R&D labs building custom airframes
  • Students and academics learning PX4 development

Buying Tip

Confirm your power setup provides the required 6 V input before connecting the Pixhawk 6C, and plan your peripherals around the FMUv6C connector standard.

Elecvora expert review

Our verdict

The Pixhawk 6C is a sensible choice for developers who want a modern H7 processor and redundant sensors in an open-standard package. It rewards careful setup with a dependable development platform.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fast STM32H743 processor with 2 MB flash and 1 MB RAM
  • Redundant IMUs plus magnetometer and barometer
  • Integrated vibration isolation and heated IMUs
  • PX4 Autopilot pre-installed
  • Compact plastic case in the FMUv6C standard

Cons

  • Requires a separate 6 V power supply
  • No ESCs, motors or peripherals included
  • Setup and tuning demand PX4 experience

Best for

Research, academic and commercial drone development

Not ideal for

Beginners wanting a ready-to-fly controller

Specifications

Item TypeOther Accessories
ProcessorSTM32H743, 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM
SensorAccel/Gyro: ICM-42688-P, Accel/Gyro: BMI055, Mag: IST8310, Barometer: MS5611
Input Voltage (V)6V
Clock Speed480 MHz
Flash Memory2mb
RAM1MB
Shipping Weight0.200 kg
Shipping Dimensions16 × 13 × 5 cm

What's in the box

  • 1 x Pixhawk 6C (plastic case)

Frequently Asked Questions

What software comes installed on the Pixhawk 6C?
PX4 Autopilot is pre-installed, so you can begin configuration in your ground station right away.
How many IMUs does it have?
It carries two accelerometer/gyro sets, the ICM-42688-P and the BMI055, for redundancy.
What input voltage does it need?
The specified input voltage is 6 V, so make sure your power arrangement matches before connecting.
What is included in the box?
The package contains one Pixhawk 6C flight controller in a plastic case. Other components are not included.
Is it suitable for commercial projects?
Yes, the FMUv6C design and processing power suit both academic research and commercial autonomous vehicle applications.
How should I care for the board?
Keep it dry, mount it with the vibration isolation in mind, and avoid stressing the connectors during installation.

Overview

The Holybro Pixhawk 6C is a flight controller built to the Pixhawk FMUv6C open standard and connector standard. It arrives with PX4 Autopilot pre-installed, so you can move straight into configuration and development. The board is housed in a low-profile plastic case and combines an STM32H743 microcontroller with sensor technology from InvenSense and Bosch.

This is a platform aimed at people who need processing headroom and sensor reliability rather than a plug-and-play toy controller. It is equally at home in a university lab, a startup prototyping autonomous vehicles, or a commercial drone programme.

Key Features

  • High-performance processing: a 32-bit Arm Cortex-M7 core at up to 480 MHz, with 2 MB of flash and 1 MB of SRAM.
  • Redundant sensing: ICM-42688-P and BMI055 accelerometer/gyro pairs, an IST8310 magnetometer and an MS5611 barometer.
  • Vibration isolation: an integrated system filters high-frequency vibration and reduces noise for cleaner sensor readings.
  • Temperature control: onboard heating resistors keep the IMUs at an optimum working temperature.
  • Open standard design: FMUv6C layout and connectors for straightforward integration.

Specifications Explained

The STM32H743 runs at 480 MHz with 2 MB flash and 1 MB RAM. In practice this means more room for complex control algorithms, logging and models, and faster iteration during development work.

Two accelerometer/gyro sets are fitted: the ICM-42688-P and the BMI055. Having two IMUs gives you redundancy, so a single sensor fault does not immediately end the flight. The IST8310 magnetometer provides heading reference, while the MS5611 barometer supplies pressure-based altitude data.

The input voltage is 6 V, so check your power supply arrangement before connecting the board. The unit ships at 0.200 kg with packaging dimensions of 16 x 13 x 5 cm.

Compatibility and Requirements

The Pixhawk 6C follows the FMUv6C open standard and connector standard, and PX4 Autopilot is pre-installed. You will need to supply a suitable 6 V input and the rest of your airframe, including ESCs, motors, radio and peripherals, which are not included. Because the board is designed around the open standard, plan your peripheral and connector choices around that layout.

Typical Uses

This controller is suited to academic research, corporate R&D labs, startup prototyping and commercial autonomous vehicle projects. It works well where developers want to test control algorithms, sensor fusion or autonomous navigation on a reliable hardware base.

What's in the Box

  • 1 x Pixhawk 6C flight controller in a plastic case

Quick specs

Item Type
Other Accessories
Processor
STM32H743, 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM
Sensor
Accel/Gyro: ICM-42688-P, Accel/Gyro: BMI055, Mag: IST8310, Barometer: MS5611
Input Voltage (V)
6V
Clock Speed
480 MHz
Flash Memory
2mb
See all specifications