Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by HOPERF, this bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: item type HM Series Module; voltage rating 1.8 to 3.6; operating voltage 1.8V-3.6V. Check that your power source supplies 1.8 to 3.6 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: HM Series Module
  • Voltage Rating: 1.8 to 3.6
  • Operating Voltage: 1.8V-3.6V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHM Series Module
Voltage Rating1.8 to 3.6
Operating Voltage1.8V-3.6V
Operating Temperature (°C)- 20℃~+85℃
Modulation ModeGFSK (Gaussian Frequency Shift Keying)
Modulation frequency2402MHz-2480MHz
Tx power- 20dBm ~+8dBm
Rx Sensitivity (dBm)-97dBm
Shipping Weight0.01 kg
Shipping Dimensions5 × 4 × 1 cm

Overview

The HOPERF Bluetooth module HM-BT4502, made by HOPERF, is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HM Series Module
  • Voltage Rating: 1.8 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage: 1.8V-3.6V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): - 20℃~+85℃
  • Modulation Mode: GFSK (Gaussian Frequency Shift Keying) (make sure the rest of your system works at this frequency)
  • Modulation frequency: 2402MHz-2480MHz (make sure the rest of your system works at this frequency)
  • Tx power: - 20dBm ~+8dBm
  • Rx Sensitivity (dBm): -97dBm

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

HM-BT4502 / HM-BT4502A is a wireless data pass-through module based on CMT4502 Bluetooth Low Energy 5.0 chip. By connecting with MCU, it can quickly realize the connection and data communication between the module and Bluetooth devices such as smartphones and tablets. MCU takes up less resource and development is simple.

Features:

  1. Easy to use without any experience in Bluetooth stack application.
  2. User interface uses universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps.
  3. Default connection interval is 30 millisecond, fast connection.
  4. Support 2M symbol transmission.
  5. Support 244 bytes packet transmission.
  6. Support AT instruction for software reset and get MAC address.
  7. Support AT instruction to set Bluetooth connection interval and control different forwarding rates (dynamic power adjustment).

Packages Includes:

1 x HOPERF Bluetooth module HM-BT4502

Quick specs

Item Type
HM Series Module
Voltage Rating
1.8 to 3.6
Operating Voltage
1.8V-3.6V
Operating Temperature (°C)
- 20℃~+85℃
Modulation Mode
GFSK (Gaussian Frequency Shift Keying)
Modulation frequency
2402MHz-2480MHz
See all specifications