Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by HOPERF, this ir and rf transmitters and receivers is a good fit for makers, students and electronics hobbyists. Main specs: item type RF Module; model no. / name RFM119W-915S1; operating frequency (mhz) 915. Check that your power source supplies 1.8 to 3.6 before connecting it.

Key Highlights

  • Item Type: RF Module
  • Model No. / Name: RFM119W-915S1
  • Operating Frequency (MHz): 915

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeRF Module
Model No. / NameRFM119W-915S1
Operating Frequency (MHz)915
Rated Voltage (VDC)1.8 to 3.6
Frequency240 to 960 MHz
Rated output power-10 to +13 dBm
Sleep Mode Current< 20 nA
Deviation1.0 to 200 kHz
Shipping Weight0.01 kg
Shipping Dimensions5 × 4 × 1 cm

Overview

The HOPERF RF module RFM119W-915S1, made by HOPERF, is listed in our ir and rf transmitters and receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: RF Module
  • Model No. / Name: RFM119W-915S1
  • Operating Frequency (MHz): 915 (make sure the rest of your system works at this frequency)
  • Rated Voltage (VDC): 1.8 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Frequency: 240 to 960 MHz (make sure the rest of your system works at this frequency)
  • Rated output power: -10 to +13 dBm
  • Sleep Mode Current: < 20 nA (your supply must deliver at least this much current)
  • Deviation: 1.0 to 200 kHz (make sure the rest of your system works at this frequency)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The RFM119W/RFM119SW is a high-performance, highly flexible, low-cost, single-chip (G)FSK/OOK transmitter for various,240 to 960 MHz wireless applications. It is a part of the HOPERF Next Gen RFTM family, which includes a complete line of transmitters, receivers, and transceivers. The RFM119W/RFM119SW provides the simplest way to control the data transmission. The transmission is started when an effective level turnover is detected on the DATA pin, while the transmission action will stop after the DATA pin holds the level low for a defined time window, or after a two-wire interface (TWI) command is issued. The chip features can be configured in two different ways: setting the configuration registers through the TWI, or programming the embedded RFPDK. The device operates from a supply voltage of 1.8 V to 3.6 V, consumes 27.6 mA (FSK @ 868.35 MHz) when transmitting +10 dBm output power, and only leaks 20 nA when it is in a sleep state. The RFM119W/RFM119SW transmitter together with the CMT2219A receiver enables a robust RF link. Applications:
  1. Low-Cost Consumer Electronics Applications.
  2. Home and Building Automation.
  3. Remote Fan Controllers.
  4. Infrared Transmitter Replacements.
  5. Industrial Monitoring and Controls.
  6. Remote Lighting Control.
  7. Wireless Alarm and Security Systems.
  8. Remote Keyless Entry (RKE).

Features:

  1. Embedded EEPROM.
  2. Very Easy Development with RFPDK.
  3. All Features Programmable.
  4. FSK, GFSK, and OOK Modulation.
  5. Deviation: 1.0 to 200 kHz.
  6. Two-wire Interface for Registers Accessing and EEPROM Programming.
  7. FCC/ETSI Compliant.
  8. RoHS Compliant.

Packages Includes:

1 x HOPERF RF module RFM119W-915S1

Quick specs

Item Type
RF Module
Model No. / Name
RFM119W-915S1
Operating Frequency (MHz)
915
Rated Voltage (VDC)
1.8 to 3.6
Frequency
240 to 960 MHz
Rated output power
-10 to +13 dBm
See all specifications