Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by HOPERF, this bluetooth, wifi and trans-receiver ics is a good fit for everyday home and hobby use. Main specs: manufacturer HOPERF; operating voltage range 1.8V to 3.6V; data rate 0.5 to 300 kbps. Check that your power source supplies 1.8V to 3.6V before connecting it.

Key Highlights

  • Manufacturer: HOPERF
  • Operating Voltage Range: 1.8V to 3.6V
  • Data Rate: 0.5 to 300 kbps

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerHOPERF
Operating Voltage Range1.8V to 3.6V
Data Rate0.5 to 300 kbps
Frequency127 to 1020 MHz
Interface4-wire SPI
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The HOPERF Transceiver chipset CMT2300AW-EQR., made by HOPERF, is listed in our bluetooth, wifi and trans-receiver ics range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: HOPERF
  • Operating Voltage Range: 1.8V to 3.6V (quoted range is usually line-of-sight; walls and interference shorten it)
  • Data Rate: 0.5 to 300 kbps
  • Frequency: 127 to 1020 MHz (make sure the rest of your system works at this frequency)
  • Interface: 4-wire SPI (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Transceiver chipset CMT2300AW-EQR is an ultra-low power, high performance, OOK (G) FSK RF transceiver suitable for a variety of 140 to 1020 MHz wireless applications. It is part of the CMOSTEK NextGen RFTM RF product line. The product line contains the complete transmitters, receivers and transceivers. The high integration of CMT2300A simplifies the peripheral materials required in the system design. Up to +20 dBm Tx Power and -121 dBm sensitivity optimize the performance of the application. It supports a variety of packet formats and codec methods to meet the needs of various different applications. In addition, CMT2300A also supports 64-byte Tx/Rx FIFO, GPIO and interrupt configuration, Duty-Cycle operation mode, channel sensing, high-precision RSSI, low-voltage detection, power-on reset, low frequency clock output, manual fast frequency hopping, squelch and etc. The features make the application design more flexible and differentiated. CMT2300A operates from 1.8 V to 3.6 V. Only 8.5 mA current is consumed when the sensitivity is -121 dBm, Super Low Power mode can further reduce the chip power consumption. Only 23mA Tx current is consumed when the output power is 13 dBm. Applications:
  1. Automatic meter reading.
  2. Home security and building automation.
  3. ISM band data communication.
  4. Industrial monitoring and control.
  5. Remote control and security system.
  6. Remote key entry.
  7. Wireless sensor node.
  8. Tag reader.

Features:

  1. Super-low Power receive mode.
  2. Sleep current: 300 nA, Duty Cycle = OFF 800 nA, Duty Cycle = ON.
  3. Receiver features: Fast and stable automatic frequency control (AFC).
  4. 3 types of clock data recovery system (CDR).
  5. Fast and accurate signal detection (PJD).
  6. 4-wire SPI interface.
  7. Direct and packet mode supported.
  8. Configurable packet handler and 64-Byte FIFO.
  9. NRZ, Manchester codec, Whitening codec, Forward Error Correction (FEC).

Specifications:

  1. Frequency range: 127 ~1020 MHz
  2. Modem: OOK, (G)FSK and (G)MSK
  3. Rx current:8.5 mA @ 433.92 MHz, FSK (High power mode) 7.2 mA @ 433.92 MHz, FSK (Low power mode)
  4. Voltage range: 1.8 ~3.6 V
  5. Data rate: 0.5 ~ 300 kbps
  6. Sensitivity: - 121 dBm 2.0 kbps, FRF = 433.92 MHz -111 dBm 50 kbps, FRF = 433.92 MHz
  7. Transmit current: 23 mA @ 13 dBm, 433.92 MHz, FSK 72 mA @ 20 dBm, 433.92 MHz, FSK

Packages Includes:

1 x HOPERF Transceiver chipset CMT2300AW-EQR.

Quick specs

Manufacturer
HOPERF
Operating Voltage Range
1.8V to 3.6V
Data Rate
0.5 to 300 kbps
Frequency
127 to 1020 MHz
Interface
4-wire SPI
Shipping Weight
0.001 kg
See all specifications