Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 80W 6A charger and discharger that runs on AC mains or DC input and covers 1-6S LiPo, LiFe and Li-ion plus NiMH, NiCd and Pb packs. Built-in balancing, an LCD status display and automatic cutoff protection make it a practical all-round charging station for RC hobbyists.

Key Highlights

  • 80W output with up to 6A charge current
  • Dual AC/DC input for home or field use
  • Supports 1-6S LiPo, LiFe and Li-ion packs
  • Also charges NiMH, NiCd and 2-20V Pb batteries
  • Built-in balance and discharge functions
  • LCD screen shows voltage, capacity and status

Ideal For

  • RC pilots charging 1-6S LiPo packs at home and at the field
  • Car and truck hobbyists running NiMH or LiPo battery packs
  • Airsoft players maintaining lithium and nickel battery packs
  • FPV builders who need balancing and discharge in one unit
  • Hobbyists who want one charger for several battery chemistries

Buying Tip

Check your pack's cell count, chemistry and connector type against the 1-6S lithium, 1-15 cell NiMH/NiCd and 2-20V Pb ranges before ordering, and confirm the supplied XT60 and alligator-clip leads match your batteries.

Elecvora expert review

Our verdict

The HTRC 680AC is a sensible all-rounder for hobbyists who keep several battery types on the bench: 80W and 6A are enough for most 1-6S packs, and dual AC/DC input means one unit covers home and field charging. It is not a high-power parallel charging station, but for everyday single-pack work it is compact and straightforward.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual AC/DC input adds real flexibility
  • Covers lithium, nickel and Pb chemistries in one unit
  • Built-in balance and discharge functions
  • LCD shows voltage, capacity and status
  • Compact footprint at about 387 g

Cons

  • 80W output limits charging speed on larger packs
  • 6A maximum current may be modest for big batteries
  • Requires correct connectors or adapters for non-XT60 packs

Best for

Hobbyists charging and balancing 1-6S packs and nickel batteries at home or at the field

Not ideal for

Pilots who need very high wattage for large packs or parallel charging

Specifications

Item TypeBattery Charger
Model No. / Name680AC
Output Power (W)80
Supported BatteryLiPo, LiFe, Li-ion, NiMH, NiCd, Pb
SupportedCells 1–6S (Li), 1–15S (NiMH/NiCd), 2–20V (Pb)
Length (mm)135.5
Width (mm)113.4
Weight (g)387
Shipping Weight0.758 kg
Shipping Dimensions20 × 17 × 8 cm

What's in the box

  • 1 x HTRC 680AC 80W 6A smart battery balance charger
  • 1 x AC power cable
  • 1 x DC charging cable with alligator clips
  • 1 x XT60 charging cable
  • 1 x balance board with connector cable
  • 1 x user manual

Frequently Asked Questions

What battery types can the HTRC 680AC charge?
It supports LiPo, LiFe and Li-ion packs from 1S to 6S, NiMH and NiCd batteries from 1 to 15 cells, and Pb batteries in the 2-20V range.
Can I use it without mains power?
Yes. The charger has a dual AC/DC design, so you can run it from a mains outlet or from a DC source using the supplied alligator-clip cable.
Does it balance lithium packs?
Yes, it has a built-in balance function and ships with a balance board and connector cable for lithium batteries.
What is the maximum charge current?
The maximum charge current is 6A, with a total output power of 80W, so larger packs will be limited by the wattage before reaching 6A.
What comes in the box?
You get the charger, an AC power cable, a DC charging cable with alligator clips, an XT60 charging cable, a balance board with connector cable, and a user manual.
How should I look after the charger?
Keep the cooling vents clear, place it on a heat-resistant surface during use, and disconnect the battery and power leads after each cycle to help it last.

Overview

The HTRC 680AC is a compact charging and discharging station built for hobbyists who work with more than one battery chemistry. It delivers up to 80W of output power and a maximum charge current of 6A, and it can be powered either from a standard AC mains outlet or from a DC source, giving you flexibility between the workbench and the flying field. A smart LCD interface keeps you informed while a pack is connected, and the integrated cooling system helps the charger stay stable during longer sessions.

Key Features

  • Dual power input: run it from AC at home or from DC when you are away from mains power.
  • Multi-chemistry support: one charger for LiPo, LiFe, Li-ion, NiMH, NiCd and Pb batteries.
  • Built-in balancer: balance charging helps keep the individual cells in lithium packs aligned.
  • Discharge function: bring packs down to a storage-friendly level when needed.
  • Real-time monitoring: the LCD shows voltage, capacity and charging status as the cycle runs.
  • Protection features: automatic cutoff protection and integrated cooling support reliable operation.

Specifications Explained

80W output and 6A current set the pace of charging: higher current fills a pack faster, while lower current is gentler. The 80W ceiling means large packs will reach the power limit before the current limit, so plan charge times accordingly.

Cell counts define what fits: 1-6S for lithium chemistries, 1-15 cells for NiMH and NiCd, and 2-20V for Pb batteries. Check your pack's cell count and chemistry before starting a cycle.

Size and weight: at roughly 135.5 x 113.4 mm and 387 g, the unit is small enough to live on a bench or travel in a gear bag without taking much room.

Compatibility and Requirements

The 680AC works with LiPo, LiFe and Li-ion packs from 1S to 6S, NiMH and NiCd batteries from 1 to 15 cells, and Pb batteries in the 2-20V range. It ships with an AC power cable, a DC charging cable with alligator clips, an XT60 charging cable, a balance board with connector cable, and a user manual, so you have the main leads needed to get started. Always confirm the connector type on your battery matches the supplied cables or your own adapter before charging.

Typical Uses

This charger suits RC aircraft, drones, cars and trucks, airsoft equipment and other hobby models that run on lithium or nickel-based packs. The discharge function is handy for bringing packs to storage voltage after a session, and the DC input makes it easy to top up at the field between flights.

What's in the Box

  • 1 x HTRC 680AC 80W 6A smart battery balance charger
  • 1 x AC power cable
  • 1 x DC charging cable with alligator clips
  • 1 x XT60 charging cable
  • 1 x balance board with connector cable
  • 1 x user manual

Quick specs

Item Type
Battery Charger
Model No. / Name
680AC
Output Power (W)
80
Supported Battery
LiPo, LiFe, Li-ion, NiMH, NiCd, Pb
Supported
Cells 1–6S (Li), 1–15S (NiMH/NiCd), 2–20V (Pb)
Length (mm)
135.5
See all specifications